687280
47
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
SMA Solar Technology AG 10 Troubleshooting
Installation Manual SB13_21TL-IA-en-65 47
10.2.3 Errors, Disturbances, Warnings
Errors, disturbances and warnings are shown in the display and start in the first line with the word
"Error", "Fault" or "Warning". In the second line of the display, the cause of the error, fault or warning
is shown.
MPP Peak The inverter is operating in MPP mode above its nominal power.
MPP-Search The inverter is calculating the MPP.
Grid
monitoring
Grid monitoring. If irradiation is low or an error has occurred, this message
appears before the inverter is connected to the electricity grid.
Offset Offset alignment of the measurement electronics
Riso Measuring the insulation resistance of the PV plant
Disturbance The inverter has detected a disturbance. The specific disturbance message is also
displayed (see Section10.2.3 "Errors, Disturbances, Warnings", page47).
Stop Operation interrupted
V-Const Constant voltage mode.
Waiting The conditions for grid connection are not (yet) fulfilled.
Message Description and Corrective Measures
!PV-Overvoltage!
!DISCONNECT DC!
Overvoltage at the DC input. The inverter may be destroyed. This message
is additionally highlighted by rapid flashing of the backlight.
Corrective measures:
1. Disconnect the miniature circuit-breaker.
2. If there is an external DC switch-disconnector, turn it off.
3. If an ESS is in use, disconnect it.
4. Release and disconnect all DC connectors using a screwdriver
(blade width 3.5 mm).
Insert a screwdriver into one of the side slots.
–Pull the DC connectors out.
5. Check whether the DC voltage is below the maximum input voltage of
the inverter. If the DC voltage is below the maximum input voltage of
the inverter, reconnect the DC connectors to the inverter.
If the DC voltage is above the maximum input voltage of the inverter,
check the PV plant design or contact the installer of the PV array.
6. If this message recurs frequently, disconnect the inverter from voltage
sources (see Section 8) and contact the SMA Service Line.
47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für SMA Sunny Boy 1600TL wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von SMA Sunny Boy 1600TL

SMA Sunny Boy 1600TL Bedienungsanleitung - Holländisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info