Problem Possible causes/consequences and MM Solutions
A warning signal
sounds when parking.
You have not engaged the parking brake before releasing the
brake pedal and switching off the drive system.
X
Switch on the ignition to deactivate the acoustic warning.
X
Engage the parking brake.
X
Make sure the gear selector lever is in park position P.
X
Turn the key to starter switch position 0.
X
Remove the key from the starter switch.
For safety, it is important that you perform the parking pro-
cedure as described (Y page 77).
You can hear a contin-
uous noise from the
front axle when brak-
ing.
The vehicle is equipped with a mechanical/acoustic brake pad
indicator.
X
Have the brake pads checked at an authorized electric drive
smart center.
Unlocking/locking manually
Unlocking the vehicle
You can unlock the driver’s door and the
charge socket flap by unlocking the
driver’s door using the key. The lock cyl-
inder is fitted with a cap.
X
Press button # on the key.
i
For replacing the transmitter battery
(Y page 178).
X
Remove cap : from lock cylinder ;.
X
Unlock the driver’s door.
The driver’s door and the charge socket
flap are unlocked.
i
To unlock the vehicle centrally press
the central unlocking switch in the upper
center console (Y page 27).
Locking the vehicle
If you can no longer lock the vehicle using
the remote control and you do not have a
spare transmitter battery at hand, please
proceed as follows:
X
Open the driver’s door.
X
Press the central locking switch
(Y page 53).
The indicator lamp on the central lock-
ing switch comes on, when the starter
switch is in position 1.
The indicator lamp on the central lock-
ing switch flashes, when the starter
switch is in position 0.
X
Remove the key from the starter switch,
take it with you, and close all doors.
The vehicle is now locked.
Unlocking/locking manually
177
>> Practical hints.
Z
