1/29/2008 VoIP Phone Administration Guide
MAG-07010 Rev. C
1
1 Introduction
This administration guide is for the VoIP Phone, SMCDSP-200 & SMCDSP-205. This administration guide
explains the keypad instructions, web configuration and command line configuration for the SMC IP Phones.
Before using each device, some setup processes are required to make the VoIP Phone work properly. Please
refer to the Setup Menu for further information.
1.1 Hardware Overview
The SMC IP Phones have the following interfaces for Networking. SMCDSP-200 supports POE that can connect
to POE switch and use the power of POE switch.
Two RJ-45 networking interfaces; these two interfaces support 10/100Mps Fast Ethernet. You can connect one
RJ-45 Fast Ethernet port to the ADSL or Switch, and connect the other one to your computer.
Dimension: approximately 18 x 20 x 8 cm
Weight: approximately 220g
Operating temperature: 0-50°C
Adapter: Input:100-240V, 50-60Hz
Output via general adapter: 6V, 1A
Output via Power over Ethernet on WAN port: Typical 5V, 1.2A (7012P only)
FCC Class B
CE, 89/336/EEC
LVD: 73/23/EEC
RoHS compliant
Warning: AC Input out of defined range will cause phone malfunction or damage.
1.2 Feature Overview
Network Interface
․ Two RJ45 10/100 Base-T
Ethernet ports
Display
․ 16 characters x 2 lines
․ Backlit, grayscale
SIP
․ SIP v2 (RFC 3261)
․ SIP RPORT(RFC 3581)
․ Many other SIP protocols
․ Support 3 SIP accounts
․ SIP server redundancy
