Bedienungsanleitung Smeg 43CT (Seite 5 von 14) (Englisch)

24314

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

– Spin dry selection

button

This button enables you to select a more

gentle spin speed. This is especially

recommended for washing garments

which have been worn and washed a great

deal or any garments whose materials

have special finishes

If you then go on to a drying programme,

you should bear in mind that the this will

take longer and will consequently work out

more expensive.

– Crease guard button

When you select this button the program-

me will stop during the last rinse, leaving

the garments floating in the water inside

the drum, thereby preventing any creases

from forming.You can then either press the

button once more to finish the programme

or select the drainage programme only to

drain away the water should you want to

avoid the spin dry programme.

Starting

Your washing machine can carry out a was-

hing programme, a drying programme or a

washing and drying programme (consecu-

tive drying).

Here is an explanation of each of these.

- Selecting a wash-only programme

1. Select the number of the programme

that you want with the Programme

Selector Control (6).

2. The Drying Time Selector Control (7)

must be set at STOP.

3. Select the wash temperature you want

with the Temperature Selector Control

(8).

4. Press whichever of the additional func-

tion buttons that you may want.

5. Press the START button.

- Selecting a combined washing and

drying programme

The process is the same as a wash-only

programme except that you set the Drying

Time Selector Control (7) at the temperatu-

re you want.

- Selecting a dry only programme

1. Turn the Programme Selector Control

(6) to letter corresponding to the type

of drying programme you want (S or D)

2. With the Drying Time Selector Control

select the drying time that you want.

3. Press the START button.

Loading garments into the

drum

Opening the loading door

To open the loading door, pull the handle 3

(Fig. 1) outwards.

Loading the drum

We recommend you to follow these steps

when loading garments into the drum:

– Make sure that there is nothing in any of

the pockets.

– Do not put any garments in which are

folded or crumpled up.

– Put the garments into the drum one by

one so that they do not become tan-

gled. Make sure that you put the sma-

llest items at the back of the drum.

– Do not press them down.

– Remember that there are different

recommended weights of loads for dif-

ferent programmes.

– When washing towels and similar

items, try to avoid washing them on

their own, always put them in with other

garments.

Once you have loaded everything into the

drum, press the loading door until it is clo-

sed tight. Make sure that nothing gets trap-

ped between the loading door and the rub-

ber seal.

ENGLISH

000

LJ6A017N5 11/10/01 16:29 Página 63

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Smeg 43CT Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Smeg 43CT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info