Bedienungsanleitung Smeg CE 6 IMX (Seite 19 von 27) (Englisch)

77319

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

Instructions for the User

12.USING THE HOB

Metal objects such as silverware or lids must not be placed on the hob surface as they can

become very hot.

Before using the oven for the first time, pre-heat it to maximum temperature long enough to burn

any manufacturing oily residues which could give the food a bad taste.

12.1 Cooking zones

The device has 4 cooking zones of various powers and diameters.

Their position is clearly indicated with circles and the heat is

limited to within the diameters traced on the glass. Under each

cooking zone there is a coil called an inductor which is powered by

an electronic system and which creates a variable magnetic field.

When a pan is positioned within this magnetic field, the high

frequency currents are concentrated directly onto the pan

producing the heat required for cooking the food.

Each cooking zone has an inner circle. This printed circle indicates the minimum permissible diameter

on that cooking zone. Pans with smaller diameters risk not being detected and therefore not activating

the inductor.

12.2 Heating accelerator

Each cooking zone has a heating accelerator. This system lets the burner operate at maximum power for

a time that is proportional to the selected power. To start the heating accelerator, turn the knob to the left,

select the “A” position and release. The letter “A” appears on the cooking hob display. At this point you

have 3 seconds to choose the desired heating position. Once the position has been adjusted between 1

and 9, “A” and the selected position will blink on the display. During the heating accelerator's operation it

is possible to increase the heating intensity at any time. The “full power” period will consequently be

modified.

On the other hand, if the power is reduced, turn the knob counterclockwise. The “A” option is

automatically disabled.

12.3 Power Function

The power function can be used to cause each heating zone to operate continuously at maximum power

for a maximum period of 10 minutes. Said function, for example, can be used to bring a large quantity of

water to a boil rapidly or to broil meat.

Turn the knob clockwise and set the heating intensity on position 9. Select the position “P” with the knob

and release. “P” appears on the hob display of the corresponding zone. After 10 minutes the power will

be reduced automatically, returning to position 9 and the “P” disappears. It is however possible to

interrupt the power function by decreasing at any time the heating intensity. When the power option is

selected on a burner (ex. the front left), the power absorbed by the second burner (back left) could be

reduced to provide the maximum energy available to the first. For the same reason the power function

has priority over the heating accelerator. If a recipient is removed from the cooking zone while the power

function is turned on, the function stops.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Smeg CE 6 IMX Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Smeg CE 6 IMX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info