Bedienungsanleitung Smeg ce6gpx (Seite 12 von 30) (Englisch)

327160

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Instructions for the User

Modifying the programmed data:

Once automatic cooking has started, its duration can be changed.

When the and symbols are steady and cooking is in progress or the oven is in standby status

waiting for cooking to start, press . The symbol begins to flash and by pressing the or

button the cooking duration can be changed. Press the button again. The symbol will begin to

flash, use the or buttons to modify the the end of cooking time.

A few seconds after the last change, the symbol will stop flashing, and automatic cooking will restart

with the new programmed data.

Once cooking has been programmed but before it starts, the symbol of the chosen function or recipe will

remain on, as will the , symbols.

10.5 Cooking with selection of a recipe

The oven has 8 preset recipes (see “10.6 Table of predefined recipes:”) and 2 memories. A recipe is a

combination of function, temperatures and cooking times presettings.

Only when PT1 is positioned on “O” it is possible to select a recipe simply by turning PT2 onto .

Press the or keys; the selected recipe will change its colour to red on the display; a few seconds

later cooking will start with the preset parameters.

When the preset temperature is reached, a series of beeps will be emitted indicating that the oven is

ready for use. The cooking time as specified in the table “10.6 Table of predefined recipes:” starts from

this moment.

Modifying the data set (during cooking)

During cooking it is possible to manually change the temperature that was preset for the recipe by

turning PT1 to the desired cooking temperature. To modify the cooking time press the key; the

symbol flashes on the display. You can increase or decrease the cooking end time using the or

keys.

These changes are not saved permanently.

10.5.1 Automatic cooking with selection of a recipe

Only when the PT1 knob is positioned on “O” it is possible to select a recipe, simply by turning PT2 onto

Press the or keys; the selected recipe will change its colour to red on the display. Within a few

seconds press the key on the display; the symbol will flash. Press the key again; the

symbol will start to flash; if you do not set a time within a few seconds, the oven returns to recipe mode

and starts cooking; otherwise, you can set a cooking time (max 23.59) using the or keys.

A few seconds after the last change, the display will show the current time and the oven will be in

standby waiting for the set start time.

At the end, the word STOP will appear on DSP1, cooking will stop and a buzzer will sound; press to

deactivate it.

Once cooking has been programmed, before it starts, the function or recipe symbol will remain on, as

will the symbols , .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Smeg ce6gpx Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Smeg ce6gpx

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info