9
button to display the next menu
parameter).
B8. Rinse button : performs a brief rinse
to heat the infuser.
(When you access the MENU: "CHANGE"
button to modify menu parameters).
B9. button: to deliver hot water or confirm.
(When you access the MENU: OK button
to confirm menu parameters).
PRELIMINARY CHECKS
Controls after transport
After removing the packaging, make sure the pro-
duct is complete and undamaged and that all ac-
cessories are present. Do not use the appliance if
it is visibly damaged. Contact Customer Services.
Installing the appliance
Important!
When installing the ap-
pliance, respect the following safety warnings:
• Installation must be performed by a qualified
professional in compliance with legislation in
force in the country of installation (see Built-
in installation).
• The packing elements (plastic bags, polysty-
rene foam, etc.) should be kept out of reach
of children as they are a safety hazard.
• Do not install the appliance in rooms where
the temperature may drop to 0°C or lower
(the water in the appliance could freeze and
cause damage).
• You should customise the water hardness as
soon as possible following the instructions
in the "SETTING WATER HARDNESS" chap-
ter.
Connecting the appliance
Danger!
Check that the mains power
supply voltage corresponds to the value indicated
on the appliance rating plate.
Connect the appliance to an efficiently earthed
and correctly installed socket with a minimum
current rating of 10A only.
If the power socket does not match the plug on
the appliance, have the socket replaced with a
suitable type by a qualified professional.
To comply with safety directives, an omnipolar
switch with a minimum contact distance of 3 mm
must be installed.
Do not use multiple sockets or extensions.
To learn to use the appliance correctly, the first
time you use it follow the detailed instructions in
the following paragraphs.
Important!
Safety cutout devices must be
included in the mains power supply in compliance
with the installation regulations in the country con-
cerned.
AUTOMATIC CUP TRAY LIGHT
When the appliance is turned on, the lights (A6)
automatically illuminate the spout and cup tray.
In some models the knobs are also illuminated.
The lights stay on until the appliance is turned
off. While coffee, steam or hot water is being de-
livered, the cooling fan comes on.
At the end of the function, the cooling fan re-
mains on to avoid condensation forming inside
the cabinet. After several minutes, the fan goes
off automatically.
N.B.:
The appliance completes this cycle
even if switched off by turning the knob
(A7) to the left or right.
Important!
Do not look at the lights di-
rectly or using an optical instrument.
