13
9. "HOT WATER PRESS OK" is displayed.
10. Press the OK button (B9)
The appliance begins delivering hot water
and the message "PLEASE WAIT... " is di-
splayed.
After the flow of hot water stops, the ap-
pliance automatically resets to "READY" sta-
tus.
Replacing the filter ("Filter
Reset")
When "REPLACE FILTER" is displayed or after 2
months of use (see date indicator), the filter must
be replaced:
1. Remove the exhausted filter;
2. Remove the new filter from the packaging.
3. Slide the pointer of the date indicator (see fig.
28) until the months of use are displayed (the
filter lasts about 2 months).
4. Insert the filter in the water tank and press it
until it touches the bottom of the tank (see
fig. 28).
5. Fill the water tank and insert in the coffee
maker;
6. Turn the cappuccino maker outwards and
place a container underneath (min. capacity
100 ml).
7. Press the MENU button (B6) to enter the
menu;
8. Press the NEXT button (B7) until "FILTER
RESET NO" is displayed.
9. Press the CHANGE button (B8) until "FILTER
RESET YES" is displayed.
10. Press the OK button (B9) to confirm.
11. "HOT WATER PRESS OK" is displayed.
12. Press the OK button (B9) again. The ap-
pliance begins delivering hot water and the
message "PLEASE WAIT... " is displayed.
After the flow of hot water stops, the ap-
pliance automatically resets to "READY" sta-
tus.
Removing the filter
If you want to use the appliance without a filter,
you must remove it and notify the appliance of
its removal as follows:
1. Press the MENU button (B6) to enter the menu.
2. Press the NEXT button (B7) until "UNINSTALL
FILTER" is displayed.
3. Press the OK button (B9). The appliance auto-
matically resets to "READY" status.
TURNING ON AND HEATING
UP
Each time the appliance is turned on, it performs
an automatic preheat and rinse cycle which can-
not be interrupted.
The appliance is ready for use only after comple-
tion of this cycle.
Danger of burns!
During rinsing, a little
hot water flows from the coffee spouts.
Avoid contact with splashes of water.
To turn the appliance on, turn the knob (A7)
(to the right or left) (fig. 5). "HEATING UP...
PLEASE WAIT" is displayed.
After heating, the message "RINSING" is displa-
yed. As well as heating the boiler, the appliance
also heats the internal circuits by circulating hot
water.
The appliance is at temperature when the mes-
sage "READY STANDARD TASTE" is displayed.
MAKING COFFEE USING
COFFEE BEANS
1. The appliance is preset to make coffee with a
standard taste. You can also choose coffee
with an extra-light, light, strong or extra-
strong taste.
To choose the required taste, press the
button (B2) (fig. 6). The required coffee taste
is displayed.
2. Place 1 cup under the spouts to make 1 cof-
fee (fig. 7) or 2 cups for 2 coffees (fig. 8).
Lower the spouts as near as possible to the
cup for a creamier coffee (fig. 9).
3. Press the button (B3) to make a short
coffee (fig. 10), the button (B4) for a
standard coffee and the button (B5) for
