Bedienungsanleitung Smeg CMS4104S (Seite 9 von 32) (Englisch)

682752

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

D2 Lid with milk frother

D3. Milk container

D4. Milk intake tube

D5. Adjustable frothed milk spout

D6. Thermal casing

D7. Lid release buttons

PRELIMINARY OPERATIONS

Checking the appliance

After removing the packaging, make sure the product is com-

plete and undamaged and that all accessories are present. Do

not use the appliance if it is visibly damaged. Contact customer

services Technical Assistance.

SETTING UP THE APPLIANCE

Please note:

• Coee has been used to factory test the appliance and it is

therefore completely normal to nd traces of coee in the

mill. The machine is, however, guaranteed to be new.

• You should customise water hardness as soon as possible

following the instructions in section “Setting water hard-

ness”.

1. Connect the appliance to the mains electricity supply

(g.1) and make sure the main switch (A19) on the side of

the appliance is pressed down (g.2);

2. SELECT LANGUAGE (setting language): press (B10) or

(B8) until the ag corresponding to the required lan-

guage appears on the display (B), then press the ag;

To proceed follow the instructions indicated on the appliance

display:

1. FILL WATER TANK WITH FRESH WATER: remove the water

tank (A12) (g.3), open the lid (g.4), ll to the MAX line

(marked on the inside of the tank) with fresh water (g.5);

close the lid and put the tank back into the appliance

(g.6);

2. INSERT WATER OUTLET: Check that the hot water/steam

spout (C6) is inserted on the connection nozzle (A10)

(g.7) and place a container with a minimum capacity of

100 ml underneath (g.8);

3. WATER CIRCUIT EMPTY PRESS OK TO START FILLING PRO-

CESS is shown on the display;

4. Press to conrm: the appliance delivers water from

the spout (g.8) then goes o automatically.

The coee machine is now ready for normal use.

Please note:

• The rst time the appliance is used, it needs to make 4-5

cappuccinos before it starts to give satisfactory results.

• On rst use the water circuit is empty, the machine could

therefore be very noisy: the noise will lessen as the circuit

lls up.

• When making the rst 5-6 cappuccinos, it is normal to hear

the noise of boiling water: after this the noise will lessen.

• To improve the performance of the appliance, we recom-

mend installing a water softener lter (C4) as described in

section “Water softener lter”. If your model is not equipped

with a lter, it is possible to request one from Authorised

Customer Service Centres.

TURNING THE APPLIANCE ON

Please note:

Before turning the appliance on, make sure the main switch

(A23) is pressed (g.2). Each time the appliance is turned on, it

performs an automatic preheat and rinse cycle which cannot be

interrupted. The appliance is ready for use only after completion

of this cycle.

Danger of burns!

During rinsing, a little hot water comes out of the coee spouts

(A13) and is collected in the drip tray (A14) underneath. Avoid

contact with splashes of water.

• To switch the appliance on, press the button (A7-

g.9): message HEATING UP PLEASE WAIT, is shown on the

display.

• When heating is complete, the message changes to: RINS

ING HOT WATER RUNNING; As well as heating the boiler, the

appliance also continues to allow hot water to run in the

internal pipework as they also heat up.

The appliance is at the desired temperature when the main

screen, homepage, appears.

TURNING THE APPLIANCE OFF

Every time the appliance is turned o, it automatically carries

out a rinse if it has made a coee.

Danger of burns!

During rinsing, a little hot water ows from the coee spouts

(A13). Avoid contact with splashes of water.

• To turn the appliance o, press the button (A7-g.9).

• The message TURNING OFF PLEASE WAIT is shown on the

display: if needed the appliance performs a rinse cycle and

then goes o (standby).

Please note:

If the appliance is not used for long periods, disconnect from the

electricity supply as follows:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Smeg CMS4104S Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Smeg CMS4104S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info