Bedienungsanleitung Smeg CMS4303X (Seite 10 von 32) (Englisch)

682754

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

• rst turn the appliance o by pressing the button

(g.9);

• release the main switch (A23) situated on the side of the

appliance (g.2).

Important!

Never press the main switch while the appliance is on.

MENU SETTINGS

Rinsing

Use this function to supply hot water from the coee spouts

(A13) to clean and heat the appliance’s internal circuit. Place a

container with a minimum capacity of 100ml under the coee

and hot water spouts (g.8).

To enable the function, proceed as follows:

1. Press (B2) to enter the menu;

2. Press (B10) or (B8) until the display shows (B)

RINSING;

3. Press to start rinsing.

Danger of burns!

Do not leave the appliance unattended while hot water is being

delivered.

1. After a few seconds, hot water comes out of the coee

spout which cleans and heats the internal circuit of the

appliance: the following message is shown on the display

RINSING HOT WATER RUNNING as well as a progress bar

which lls up as the preparation progresses;

2. To stop the rinsing cycle, press or wait for rins-

ing to stop automatically.

Please note:

• If the appliance is not used for more than 3-4 days, when

switched on again, we strongly recommend doing 2/3 rins-

es before use;

• After rinsing, it is normal that there is some water in the

grounds container (A10).

De-scaling

For instructions on de-scaling, see section “De-scaling”.

Water lter

For instructions on how to install the lter (C4), see section

“Water softener lter”.

Beverages settings

In this section, you can consult your customised settings and, if

you wish, reset the default values for each beverage.

1. Press (B2) to enter the menu;

2. Press (B10) or (B8) until DRINKS SETTINGS

appears on the display (B);

3. Press : The values for the rst beverage appear on the

display;

4. The reference user prole is highlighted on the display. The

values are shown on the vertical bars: the manufacturer de-

fault value is indicated by the symbol while the cur-

rent set value is highlighted by the lled part of the vertical

bar;

5. To go back to the settings menu, press .

To scroll and display the beverages, press ;

6. To return to the default manufacturer values for the bever-

age shown on the display, press RESET;

7. CONFIRM RESET?: to conrm, press (to cancel,

press );

8. RETURN TO FACTORY: press .

The beverage has been reset to the default values. Continue with

the other beverages, or go back to the settings menu.

Please note:

• To change the beverages for another prole, go back to the

homepage, select the required prole (B11) and repeat the

procedure.

• To reset all the beverages in the prole to the default val-

ues, see paragraph “Manufacturer Default values”.

Set time

To adjust the time on the display (B), proceed as follows:

1. Press (B2) to enter the menu;

2. Press (B10) or (B8) until the display (B) shows

SET TIME;

3. Press : The time setting panel appears on the screen;

4. Press or corresponding to the hours and minutes

until the current time is displayed;

5. To conrm, press (to cancel, press ), then

press to go back to the homepage.

The time is now set.

Auto-start

The auto-start time can be set in order to have the appliance

ready at a certain time (for example in the morning) so that it

can immediately make coee.

Please note:

To enable this function, the time must already be set correctly,

see paragraph “Set time ”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Smeg CMS4303X Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Smeg CMS4303X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info