Bedienungsanleitung Smeg CMS4604NX (Seite 16 von 32) (Englisch)

682751

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Please note:

If “Energy saving” mode is active, there may be a few seconds

delay before steam is delivered.

Tips for using steam to froth milk

• When choosing the size of the container, bear in mind that

the liquid doubles or triples in volume.

• For a richer denser froth, use skimmed or partially skimmed

milk at refrigerator temperature (about 5°C).

• For a creamier froth, rotate the container with slow move-

ments in an upward motion.

• To avoid milk with poor froth or large bubbles, always clean

the spout (C6) as described in the following paragraph.

Cleaning the hot water/steam spout after use

Always clean the hot water/steam spout (C6) after use to avoid

the build-up of milk residues and prevent it from clogging.

1. Place a container under the hot water/steam spout and let

a little water out (see section “Delivering hot water”). Then

stop the delivery of hot water by pressing .

2. Wait a few minutes for the hot water/steam spout to cool

down; then extract it (g.18). Hold the spout steady with

one hand and with the other, turn and detach the cappuc-

cino maker pulling it downwards (g.24).

3. Also remove the steam connection nozzle by pulling it

downwards (g.24).

4. Check the hole in the connection nozzle is not blocked. If

necessary, clean using a toothpick.

5. Wash all parts of the spout thoroughly with a sponge and

warm water.

6. Attach the connection nozzle and the cappuccino maker

onto the spout by pushing it upwards and turning it clock-

wise until it is secure.

CUSTOMISING BEVERAGES

The aroma (for drinks where required) and length of the drinks

can be customised.

1. Make sure that the prole for which customising the drink

is required is active: it is actually impossible to select the

drinks for all 6 proles ;

2. From the homepage, press (B1);

3. Choose the beverage you wish to customise in order to ac-

cess the customising screens: the relative accessories must

be inserted;

4. (Beverages with coee only) CHOOSE COFFEE AROMA LEV-

EL: Select the required aroma by pressing or

and press ;

5. CUSTOMISING COFFEE (OR WATER) QUANTITY, PRESS STOP

TO SAVE: Preparation begins and the appliance displays the

quantity customising screen in the form of a vertical bar.

The star alongside the bar represents the current quantity

set.

6. When the amount reaches the minimum quantity you can

set, the display shows .

7. Press when the required quantity in the cup is

reached.

8. SAVE NEW SETTINGS? : Press YES or NO.

The appliance conrms if the values have been saved or not (de-

pending on the previous selection): press .

The appliance goes back to the homepage.

Please note:

• Milk based drinks: the coee aroma is saved rst, followed

by the quantity of rst milk, then coee;

• Hot water: the appliance supplies hot water: press

to save the desired quantity.

• It is possible to come out of programming by pressing

: the values will not be saved.

MEMORISING YOUR PERSONAL PROFILE

The appliance allows you to memorise 6 dierent proles, each

associated with a dierent icon.

In every prole the customised beverages aroma and quantity

values are saved (see section “Customising beverages ”)

and the order in which all the beverages are displayed is based

on the frequency of selection.

To select or enter a prole, press on the prole currently in use

(B11), press (B10) or

(B8)

until the required prole is

displayed, then press on the prole.

Please note:

• Prole GUEST : select this prole to deliver beverages

with the default settings.

CLEANING

Cleaning the machine

The following parts of the machine must be cleaned regularly:

• appliance internal circuit;

• coee grounds container (A4);

• drip tray (A14);

• water tank (A12);

• coee spouts (A13);

• pre-ground coee funnel (A21);

• infuser (A5), accessible after opening the service door (A2);

• milk container (D);

• hot water/steam connection nozzle (A10);

• control panel (B).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Smeg CMS4604NX Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Smeg CMS4604NX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info