Bedienungsanleitung Smeg FR 150 A (Seite 9 von 37) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

73927

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

ATTENTION

Read your manual carefully since it contains instructions which

will ensure safe installation, use and maintenance of your

appliance.

Your Refrigerator is built to International safety standards

(EN60) and has been awarded the European approval mark

(IMQ) for compliance with UK electrical safety requirements.

It also meets the EC standards on the prevention and elimi-

nation of radio interference (EC directive 87/308 - 02.06.89).

1. This appliance is designed to be used indoors and under

no circumstances should it be installed outside even if pro-

tected by a roof. Leaving the appliance exposed to the rain

and weather is exceedingly dangerous.

2. The appliance should be used only by adults and exclu-

sively for storing foodstuffs in compliance with the instruc-

tions provided in this manual. Under no circumstances should

children be allowed to operate, or tamper with, this product.

3. Do not attempt to operate or handle this appliance when

barefoot, or with wet hands or feet.

4. It is highly recommended that you do not operate this

appliance by connecting it to the power supply with exten-

sions or multiple socket plugs. If the refrigerator has been

installed between two cabinets, make sure that the supply

chord is not dangerously crimped or trapped beneath a heavy

object.

5. Never pull the cable or the appliance to remove the plug

from the socket; this is exceedingly dangerous.

Safety - a good habit to get into.

6. Do not touch the internal cooling elements, especially if

your hands are wet, since you could burn or hurt yourself.

7. Before doing any cleaning, disconnect the appliance from

the electricity (by pulling out the plug or turning off the gen-

eral switch in your home); it is not sufficient to place the

main switch "A" on "0" to cut off the power.

8. Before disposing of your old appliance, remember to break

or remove the lock as a safety measure to protect children

who might lock themselves inside the appliance when play-

ing.

9. If your appliance is not operating properly, read the chap-

ter entitled, “Trouble Shooting”, which might help you re-

solve the problem, before calling an after-sales service cen-

tre. Do not attempt to repair the appliance by tampering

with the internal components.

10. If the power supply cord must be replaced, please con-

tact one of our Customer Service Centers. In some cases,

the connections are made using special terminals and in oth-

ers a special tool must be used to access the connections.

11. Do not use electric appliances inside the compartment for food

storage, if these are not those recommended by the manufacturer.

12. At the end of the functional life of your appliance – containing

cyclopentane gas in the insulation foam and perhaps gas R600a

(isobutane) in the refrigeration circuit – the latter should made safe

before being sent to the dump.

For this operation, please contact your dealer or the Local Organisation

in charge of waste disposal.

Installation

To ensure that the appliance operates properly and to

reduce energy consumption, it is important that the

appliance is installed correctly.

Ventilation

The compressor and condenser generate heat and, there-

fore, need to be ventilated properly. Rooms with less than

perfect ventilation are not very suited for installation of the

appliance. Therefore, it should be installed in a room with

an opening (window or French window) that provide the

appropriate amount of air re-circulation. It is also important

that the room not be too humid.

During installation, make sure not to cover or obstruct the

grates that allow for proper ventilation of the appliance.

Away from Heat

Avoid positioning the appliance in a place where it is directly

exposed to sunlight or near an oven, cook top or the like.

Electrical Connection and Earthing

Before proceeding with the electrical connection, make sure

that the voltage indicated on the rating plate, located at the

bottom left near the vegetable crisper, corresponds to the

mains voltage in your home and that the socket is fitted with

a standard earthing wire in accordance with safety stand-

ards for 46/90 systems. If the socket is not fitted with an

earthing wire, the manufacturer will not be held liability for

any damages and or injuries arising out of the use of the

appliance. Do not use multiple sockets or adapters.

Position the appliance in such a way that you can access

the socket where it is plugged in.

Insufficient power?

The electrical socket must be able to handle the maximum

power load of the appliance, which is indicated on the rating

plate located at the bottom left next to the vegetable crisper.

Before making the electrical connection ...

After the appliance has been delivered, place it in the verti-

cal upright position and wait at least 3 hours before inserting

the plug into the socket in order to ensure that it functions

properly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Smeg FR 150 A Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info