Bedienungsanleitung Smeg SO6104APN (Seite 49 von 66) (Englisch)

791707

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

USE - 12191477A081/B

14.Touch the CONFIRM button to confirm

that you have finished filling the reservoir.

Manual reservoir draining

1. Touch the OTHER FUNCTIONS

button on the "main menu" (in the main area

2. Touch the sub-menu button (located in

the lower area ).

3. Touch the RESERVOIR DRAIN

button.

4. Place a jug or container on the open door.

5. Remove the loading wand from its holder.

6. Press the START button to start draining

the water into the jug (or container).

When complete, the display will indicate that

the residual water removal process is complete.

7. Touch the CONFIRM button.

8. Shake the loading wand in order to remove

any remaining water.

9. Place the loading wand back in its holder.

10.Remove the jug (or container).

11.Close the door.

For the cleaning function VAPOR CLEAN

(only on some models) and the cleaning

functions of the sub-menu , see the chapter

CLEANING AND MAINTENANCE.

In the event of a blackout

Following a power failure during a function, the

appliance automatically resumes the function it

was performing, maintaining all the previous

settings and discounting the time already

elapsed of the function only if:

• the duration of the power failure is less than

or equal to 60 seconds;

• the function does not include the use of

microwaves (depending on the model);

• the pyrolytic function is in progress

(depending on the model);

• the Sabbath function is in progress

(regardless of power failure time).

If the power failure occurs in a condition other

than those described above, the appliance

remains waiting for manual consent to continue

or not the function from the user for a certain

time.

If the function is reactivated, the cooking settings

remain as they were before the blackout, taking

into account the time already elapsed.

If there is no intervention by the user, the

appliance cancels the function and the display

shows the current time again.

Blackout during a programmed function

If the power failure occurs while a programmed

cooking process is set:

• If the blackout is restored within the set start

time, the appliance remains in standby

mode updating the time until start.

• If the blackout is restored after the set start

time, the device waits for the function to start

and, if after a certain time there is no

intervention by the user, the appliance

cancels the function and the display shows

again the current time.

Settings

The product configuration can be set using this

menu.

• Touch the SETTINGS button on the

main menu (at the right in the lower area

Function for draining water (or other

liquids) from the reservoir.

(SmegConnect models only) A

notification also appears in the app

when you reconnect.

In the event of a temporary power cut,

all personal settings will remain stored.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Smeg SO6104APN Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Smeg SO6104APN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info