Bedienungsanleitung Smeg SOP6104TPN (Seite 37 von 44) (Englisch)

791709

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

CLEANING AND MAINTENANCE - 85914779721/B

Pyrolytic (on some models only)

Preliminary operations

Before starting the pyrolytic cycle:

• Clean the internal glass pane following the

usual cleaning instructions.

• Remove any food residues or large spills

from previous cooking operations from the

inside of the oven.

• Completely remove all accessories from

inside the oven.

• For very stubborn encrustations spray an

oven cleaning product onto the glass (read

the warnings on the product); leave for 60

minutes, then rinse and dry the glass using

kitchen roll or a microfibre cloth.

• If present, remove the temperature probe.

• Remove the rack/tray support frames.

• Close the door.

Pyrolytic function setting

1. Touch the OTHER FUNCTIONS

button on the "main menu" (in the main area

2. Select PYROLYTIC function .

The display shows the Pyrolytic function duration

(factory set to 2:00 hours).

3. Scroll with your finger to set the duration of

the Pyrolytic function from a minimum of

2:00 hours to maximum 3:00 hours.

4. Press the CONFIRM button to confirm

the selected duration.

The display shows the warning to remove all

accessories from the oven cavity before starting

the function.

On the right of the icon both the selected

duration for pyrolytic function (top) and the

expected end time of the function (bottom) are

displayed.

5. Press the START button to start the

pyrolytic function.

Approximately 1 minute after the Pyrolytic

function starts, the indicator light (in the

lower area ) comes on to indicate that the

door is locked by a device that prevents the

door from being opened.

At the end of the function, the appliance beeps

and the display returns to the main menu.

For easier manual cleaning of parts that

are difficult to reach, we recommend

removing the door.

See General safety instructions.

Pyrolytic cleaning is an automatic high-

temperature cleaning procedure which

causes dirt to dissolve. This process

makes it possible to clean the inside of

the oven very easily.

Available pyrolytic function durations:

• Light dirt: 2:00

• Medium dirt: 2:30

• Heavy dirt: 3:00

It is not possible to start the pyrolytic

function if the temperature probe (if

available) is plugged in and the icon

flashes.

It is not possible to select any function

once the door lock device has been

activated.

The door is locked until the temperature

inside the oven cavity returns to a safe

level.

During the Pyrolytic cycle the fans

produce a more intense level of noise

due to a greater rotation speed. This is

an absolutely normal operation,

intended to provide more effective heat

dispersal. At the end of the pyrolytic

cycle, the fans will continue to operate

for long enough to avoid overheating

the walls of adjacent units and the front

of the oven.

During the first Pyrolytic cycle,

unpleasant odours may occur due to

the normal evaporation of oily

manufacturing substances. This is an

absolutely normal phenomenon which

disappears after the first pyrolytic cycle.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Smeg SOP6104TPN Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Smeg SOP6104TPN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info