Bedienungsanleitung Smeg SOP6302TX (Seite 31 von 40) (Englisch)

791936

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

74 - CLEANING AND MAINTENANCE 914779561/F

down.

Avoid letting food residue dry inside the oven

cavity, as this could damage the enamel.

Take out all removable parts before cleaning.

For easier cleaning, it is recommended to

remove:

•the door;

• The rack/tray support frames.

Drying

Cooking food generates moisture inside the

appliance. This is a normal phenomenon and

does not affect the appliance’s operation in any

way.

Each time you finish cooking:

1. Let the appliance cool down.

2. Remove any dirt from inside the appliance.

3. Dry the interior of the appliance with a soft

cloth.

4. Leave the door open until the inside of the

appliance has dried completely.

Cleaning the probe (on some models only)

After each use, the temperature probe must be

cleaned after it has cooled down. Clean the tip

of the temperature probe (metal part) with

water, neutral dish soap and a soft sponge.

Clean the rest with a soft damp cloth.

Do not wash it in a dishwasher as it could

damage the electrical components of the plug.

Dry thoroughly after cleaning.

Removing racks/trays support frames

Removing the rack/tray support frames enables

the sides to be cleaned more easily.

To remove the rack/tray support frames:

• Pull the frame towards the inside of the oven

cavity to unhook it from its groove A, then

slide it out of the seats B at the back.

• When cleaning is complete, repeat the

above procedures to put the rack/tray

support frames back in.

Special cleaning functions

• From position 0, turn the function knob to the

left by one position. The button flashes.

Vapor Clean (on some models only)

Preliminary operations

Before starting the Vapor Clean cycle:

• Completely remove all accessories from

inside the oven.

• Remove the temperature probe, if present.

• Remove the self-cleaning panels, if present.

• Pour approx. 120 cc of water onto the floor

of the oven. Make sure it does not overflow

out of the cavity.

• Spray a water and washing up liquid

solution inside the oven using a spray

nozzle. Direct the spray towards the side

walls, upwards, downwards and towards

the deflector.

• Close the door.

• During the assisted cleaning cycle, wash the

self-cleaning panels (where fitted), which

were previously removed, separately in

warm water and a small amount of

detergent.

In the event you are using specific

cleaning products, we recommend

running the oven at maximum

temperature for 15-20 minutes in order

to eliminate any residue.

See General safety instructions.

The Vapor Clean function is an assisted

cleaning procedure that facilitates the

removal of dirt. Thanks to this process, it

is possible to clean the inside of the

oven very easily. The dirt residues are

softened by the heat and water vapour

for easier removal afterwards.

We recommend spraying approx. 20

times at the most.

Do not spray the deflector if it has a self-

cleaning coating.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Smeg SOP6302TX Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Smeg SOP6302TX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info