Bedienungsanleitung Smeg SOP6606S2PNR (Seite 43 von 55) (Englisch)

791983

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

CLEANING AND MAINTENANCE - 101914779938/B

• Completely remove all accessories from

inside the oven.

• If present, remove the temperature probe.

• If present, remove the self-cleaning panels.

• Close the door.

• During the assisted cleaning cycle, wash the

self-cleaning panels (where fitted), which

were previously removed, separately in

warm water and a small amount of

detergent.

Vapor Clean cycle setting

1. Touch the OTHER FUNCTIONS

button on the "main menu" (in the main area

2. Select VAPOR CLEAN .

3. Touch the START button to start the

reservoir filling procedure.

4. Proceed with reservoir filling as described

above.

Vapor Clean cleaning phase

5. Touch the START button to start the

Vapor Clean function.

This stage is indicated by a progressive increase

in the cooking level.

End of Vapor Clean

At the end of the Vapor Clean function,

"Function ended" displays and a buzzer sounds

briefly, which can be deactivated by touching

any point of the display or by opening the door.

1. Touch the HOME button to quit the

function.

2. Proceed with draining the reservoir as

described above.

3. Open the door and wipe away the less

stubborn dirt with a microfibre cloth.

4. Use a non-scratch sponge with brass

filaments on tougher encrustations.

5. In case of grease residues use specific oven

cleaning products.

6. Remove any remaining water from the oven

cavity.

7. Where fitted, reposition the self-cleaning

panels and the rack/tray support frames.

For greater hygiene and to avoid foods taking

on unpleasant odours:

• We recommend drying the inside of the

oven with a fan assisted function at 160°C

for around 10 minutes.

• Where the self-cleaning panels are fitted,

we recommend drying the inside of the oven

with a simultaneous catalysis cycle.

Pyrolytic (on some models only)

Preliminary operations

Before starting the pyrolytic cycle:

• Clean the internal glass pane following the

usual cleaning instructions.

• Remove any food residues or large spills

from previous cooking operations from the

inside of the oven.

• Completely remove all accessories from

inside the oven.

• For very stubborn encrustations spray an

oven cleaning product onto the glass (read

the warnings on the product); leave for 60

minutes, then rinse and dry the glass using

kitchen roll or a microfibre cloth.

If the internal temperature is higher than

expected, the function is not activated.

Let the appliance cool down before

activating the function.

The duration and temperature of the

Vapor Clean function cannot be

changed by the user.

We recommend wearing rubber gloves

for these operations.

For easier manual cleaning of parts that

are difficult to reach, we recommend

removing the door.

See General safety instructions.

Pyrolytic cleaning is an automatic high-

temperature cleaning procedure which

causes dirt to dissolve. This process

makes it possible to clean the inside of

the oven very easily.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Smeg SOP6606S2PNR Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Smeg SOP6606S2PNR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info