Bedienungsanleitung Smeg SOP6900TN (Seite 18 von 25) (Englisch)

792005

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

CLEANING AND MAINTENANCE - 4791477A143/B

• Remove any food residues or large spills

from previous cooking operations from the

inside of the oven.

• Completely remove all accessories from

inside the oven.

• For very stubborn encrustations spray an

oven cleaning product onto the glass (read

the warnings on the product); leave for 60

minutes, then rinse and dry the glass using

kitchen roll or a microfibre cloth.

• If present, remove the temperature probe.

• Remove the rack/tray support frames.

• Close the door.

Pyrolytic function setting

1. Turn the function knob to the position .

The display shows the text

alternated with the Pyrolytic cycle

duration (factory set to 2 hours and 30 minutes).

2. Use the increase and decrease

keys to set the Pyrolytic cycle duration.

3. Press the clock key to confirm the data

entered.

After a few seconds, the preheating of the

Pyrolytic cycle starts:

• the symbol on the display and the

Pyrolytic cycle indicator light switch on;

• the display shows the time left until the end

of the entire cleaning process ;

• the symbol on the display flashes.

A few minutes after the preheating starts, the

symbol comes on (steadily lit) to indicate that the

door is locked by a device that prevents the

door from being opened.

Cleaning process

At the end of preheating, the Pyrolytic cycle

starts automatically:

• the thermostat indicator light turns off (turning

on and off regularly indicates that the

temperature inside the oven cavity is being

kept constant);

• on the display, the symbol comes on

(steadily lit) to indicate that the Pyrolytic

cycle is in progress;

• The Pyrolytic cycle indicator light and the

and symbols on the display remain

lit.

End of Pyrolytic function

At the end of the Pyrolytic function:

• the heating elements are deactivated;

• the flashing text appears on

the display;

• a buzzer sounds, which can be switched off

by pressing any key on the display;

• the symbol and the thermostat indicator

light switch off.

1. Turn the function knob to position 0 to exit

the function.

The symbol on the display remains lit until

the temperature inside the oven cavity returns to

safe levels (with the consequent deactivation of

the door lock).

2. Wait for the oven cavity to cool down.

3. After the symbol switches off, open the

door and collect the residue deposited

Recommended pyrolytic cycle duration:

• Light dirt: 2:00

• Medium dirt: 2:30

• Heavy dirt: 3:00

It is not possible to select any function

once the door lock device has been

activated.

If the function knob is turned to another

function, the display shows an error

message .

During the first Pyrolytic cycle,

unpleasant odours may occur due to

the normal evaporation of oily

manufacturing substances. This is an

absolutely normal phenomenon which

disappears after the first pyrolytic cycle.

During the Pyrolytic cycle the fans

produce a more intense level of noise

due to a greater rotation speed. This is

an absolutely normal operation,

intended to provide more effective heat

dispersal. At the end of the pyrolytic

cycle, the fans will continue to operate

for long enough to avoid overheating

the walls of adjacent units and the front

of the oven.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Smeg SOP6900TN Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Smeg SOP6900TN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info