32
External circular filter
To remove this filter:
Take hold of the conical filter's tabs and turn anticlockwise (box A).
Without pressing the tabs, lift the assembly (box B).
When cleaning this filter, the others should also be cleaned.
How to install the filters:
Reposition the external steel filter
Insert the soft conical filter into the steel filter by pressing its external edges slightly (box A);
Rotate the cone-shaped filter clockwise as far as possible, about 90°.
Tips for good maintenance
The filters should be cleaned under running water using a stiff brush.
It is essential to thoroughly clean the filters according to the above instructions: the dishwasher cannot
function if the filters are clogged.
Reposition the the filters accurately before running a wash cycle.
7.4 Description of maintenance and cleaning by an authorised technician
Described in document reserved for authorised technicians.
7.5 Diagnostics, fault reporting and troubleshooting
ELIMINATING MINOR FAULTS
In some cases it is possible to remedy minor problems by referring to the following instructions.
1. If the program does not start, check that:
The dishwasher is connected to the mains.
There is no power cut.
The water tap is open.
The dishwasher door is properly closed.
2. If water is left inside the dishwasher, check that:
The drain hose is not kinked.
The drain trap is not blocked.
The dishwasher filters are not clogged.
3. If the load is not properly cleaned, check that:
The correct amount of detergent has been added.
The salt container is not empty.
The tableware has been loaded correctly.
The selected program is suitable for the type and degree of soiling.
All filters are clean and correctly installed.
The spray arm nozzles are not clogged.
There is nothing obstructing the rotation of the spray arms.
Check that the salt container cap is properly closed.
4. If the tableware does not dry properly or looks dull after washing, check that:
The rinse aid intake filter is clean.
The rinse aid container is not empty.
The rinse aid dispenser setting is correct.
The detergent used is of good quality and has not lost its effectiveness (for example, through incorrect
storage, with the box left open).
Check that the salt container cap is properly closed.
