Bedienungsanleitung Smoov One O10 (Seite 21 von 37) (Englisch)

785804

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

7. Automatic shutdown

If the control unit is not actuated for longer than 20 minutes (factory setting), it is

automatically put into standby mode together with the drive unit (the LEDs go out).

If the drive unit shuts down automatically if it is not used for one hour. As of this

moment, there is no longer an active Bluetooth connection between the control unit and

drive unit.

To put the system back into operation, the drive unit and control unit need to be

switched on again (see chapter 3.1).

8. Pairing

Pairing refers to a process in which Bluetooth devices are connected to each other.

With regard to the SMOOV O10, these devices are the drive unit and the control unit.

Both components are connected by radio and exchange characteristic data in this way.

They therefore recognise each other automatically during every start-up.

The drive unit and the control unit are already paired upon delivery of the SMOOV O10.

In the event that the drive unit or control unit are replaced (within the Alber exchange

pool for example), the components no longer recognise each other and need to be

matched with each other by means of re-pairing as described below.

•Fully charge the batteries of the control unit and the drive unit (see chapter 4).

•Open the cover [13] on the control unit.

•Switch on the drive unit.

•Pick up your smartphone, open the SMOOV O10 Mobility app (this is available free of

charge in Google Play Store or the Apple App Store) and connect to the drive unit.

•Now go to Settings, then to Drive unit/control unit, and finally to Control unit.

•Switch on the control unit.

•Press the “Pairing” button in the app and then hold the smartphone’s camera on the

QR Code on the bottom of the drive unit.

•Then hold the camera of the smartphone on the QR Code on the control unit below

the USB-C socket.

•Pairing now starts automatically. The LED of button [3] flashes blue on the drive

unit; LEDs [b] and [d] flash white.

•Use a pointed object, such as a ballpoint pen, to press and hold the Pairing button

[15] on the control unit for approx. 3 seconds. LED [f] flashes blue on the control

unit; LEDs [b] and [d] flash white.

•Hold the control unit close to the drive unit.

•Pairing is complete as soon as button [3] flashes green on the drive unit.

•Close the cover [13] on the control unit.

Your SMOOV O10 is ready for use again if pairing was carried out successfully.

Remove the QR Code from the drive and operating unit and stick them in the user

manual for your safety, so that no unauthorized person can connect another control

unit to the SMOOV O10.

The pairing of the control unit and the drive unit via Bluetooth is unique when delivered

(factory settings), that means that exclusively this paired control unit and no other one

is able to control this drive unit.

If a new control unit is required, both the QR code (unique key for 128 bit AES encryp-

tion) of the SMOOV O10 O10 and the QR of the new control unit must be scanned via the

Mobility App for pairing. The previous control unit is then no longer paired.

No other Bluetooth devices like e.g. headphones can be paired with the SMOOV O10 O10.

The Bluetooth connection is secured via a 128 bit AES key, so no one else can take con-

trol of the system.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Smoov One O10 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Smoov One O10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info