809871
100
Zoom out
Zoom in
Vorherige Seite
1/108
Nächste Seite
100
D785 User Manual Appendix 4
Conference Server This function key can be used for PBX-based conferences and for local conferences on
the phone itself.
PBX-based conferences. When a conference room or conference account has been
created on the server for an individual identity, you can dedicate a function key to
calling and monitoring the conference room. Select the identity and the "Conference
server" function from the respective drop-down menus and enter the SIP URI of the
conference room in the "Number" text field. For information on how to use this key
with your particular PBX, please check the PBX manual.
Phone-based conferences. If there is no SIP URI in the text field, pressing the
function key will initiate a phone-based conference with all held calls and any active
call.
DTMF This funcion allows the specification of arbitrary key sequences (allowed digits: "0-9", "*",
"#", "A-D" and flash: "!") which will be sent via DTMF when this key is pressed during an
active call.
Extension This function key allows showing the status (idle, ringing, held call, busy) of another
extension on the key's LED. By pressing the key, it may also be possible to pick up calls
ringing on the extension, to dial the extension when the phone is idle, and to transfer an
incoming call ringing on your own extension. These functionalities depend on your PBX;
for more information, please check snom's interoperability page and the PBX manual.
With Asterisk, generally use BLF rather than this function.
Forward to All incoming calls will be forwarded to the number (extension or external phone number)
specified under "Number". The key is used to turn forwarding of all calls on and o; the
red LED lights up when the function is turned on.
Intercom Pressing a function key mapped with "Intercom" will establish a two-way connection
to the extension specified in the "Number" text field; that extension must have enabled
intercom reception on its web interface (Advanced Settings > Behavior tab > Phone
Behavior > Intercom Policy "only in idle" or "always").
"Intercom Policy" settings on the phone being called via intercom:
Always: The intercom call will connect to the called phone automatically; if the called
phone is in a call, that call will be placed on hold.
Only in idle: The intercom call will connect to the called phone automatically if the
called phone is idle. If it is in a call, the incoming intercom call will be announced as call
waiting.
O: Pressing the intercom key will call the extension specified in the "Number" text field
where it will be treated like any other incoming call, i.e., ring, be forwarded, etc.
100

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Snom D785 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Snom D785

Snom D785 Bedienungsanleitung - Deutsch - 116 seiten

Snom D785 Kurzanleitung - Holländisch - 0 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info