809850
110
Zoom out
Zoom in
Vorherige Seite
1/190
Nächste Seite
M100 SC
SIP DECT 8-Line Base Station
Administrator and Provisioning Manual
Rev. 1 06/19
M100 SC Administrator and Provisioning Manual
2
C
ONTENTS
Preface .................................................................................................................. 7
Text Conventions............................................................................................................................ 8
Audience .......................................................................................................................................... 8
Related Documents ........................................................................................................................ 8
Introducing the M100 SC .................................................................................. 9
About the M100 SC 8-line base station ................................................................................... 10
Quick Reference Guide .............................................................................................................. 11
Network Requirements ............................................................................................................... 13
M100 SC Configuration Methods .............................................................................................. 14
Using Shared Calls ..................................................................................................................... 15
Key System Emulation ................................................................................................................ 18
Configuration Using the Phone Menus ...................................................... 20
Viewing the Main Menu .............................................................................................................. 21
Using the Status menu ................................................................................................. 21
Viewing Line status ....................................................................................................... 23
Using the Admin Settings Menu ................................................................................................ 24
Using the Network Setting menu ................................................................................ 25
Using the Security menu .............................................................................................. 31
Using the Provisioning menu ....................................................................................... 31
Editing the handset PIN code ...................................................................................... 34
Using the WebUI ............................................................................................... 35
Using the Web User Interface (WebUI) ................................................................................... 36
Status Page .................................................................................................................................. 38
System Status ................................................................................................................ 38
Handset Status .............................................................................................................. 39
System Pages .............................................................................................................................. 40
SIP Account Management ........................................................................................... 40
General Account Settings ..................................................................................... 40
Dial Plan .................................................................................................................. 42
SIP Server Settings ............................................................................................... 43
Registration Settings ............................................................................................. 43
M100 SC Administrator and Provisioning Manual
3
Outbound Proxy Settings ...................................................................................... 43
Backup Outbound Proxy Settings ....................................................................... 44
Caller Identity Settings .......................................................................................... 44
Audio Settings ........................................................................................................ 44
Quality of Service ................................................................................................... 46
Signaling Settings .................................................................................................. 46
Voice Settings ......................................................................................................... 47
Feature Access Codes Settings .......................................................................... 47
Voicemail Settings ................................................................................................. 49
NAT Traversal ........................................................................................................ 49
Music on Hold Settings ......................................................................................... 50
Network Conference Settings .............................................................................. 50
Session Timer ......................................................................................................... 50
Jitter Buffer .............................................................................................................. 51
Keep Alive ............................................................................................................... 51
Call Settings ................................................................................................................... 53
General Call Settings ............................................................................................ 53
Do Not Disturb ........................................................................................................ 53
Call Forward ........................................................................................................... 53
User Preferences .......................................................................................................... 55
General User Settings ........................................................................................... 55
Handset Settings ........................................................................................................... 55
Account Assignments ............................................................................................ 55
KeyLine Assignments ............................................................................................ 57
Repeater Mode ....................................................................................................... 59
Handset Name........................................................................................................ 61
Programmable Hard Keys .................................................................................... 61
Server Application ......................................................................................................... 63
Action URI Syntax .................................................................................................. 63
Action URI ............................................................................................................... 65
XML Push Settings ................................................................................................ 67
Network Pages............................................................................................................................. 68
Basic Network Settings ................................................................................................ 69
Basic Network Settings ......................................................................................... 69
Advanced Network Settings ........................................................................................ 71
VLAN ........................................................................................................................ 71
LLDP-MED .............................................................................................................. 72
802.1x ...................................................................................................................... 72
VPN .......................................................................................................................... 73
Contacts Pages ........................................................................................................................... 74
Base Directory ............................................................................................................... 74
Create Base Directory Entry ................................................................................. 76
Directory Import/Export
......................................................................................... 77
Blacklist ................................................................................................................... 77
Create Blacklist Entry ............................................................................................ 79
Blacklist Import/Export........................................................................................... 80
LDAP ............................................................................................................................... 81
LDAP Settings ........................................................................................................ 81
M100 SC Administrator and Provisioning Manual
4
Servicing Pages ........................................................................................................................... 86
Reboot ............................................................................................................................ 86
Time and Date ............................................................................................................... 86
Time and Date Format .......................................................................................... 87
Network Time Settings .......................................................................................... 87
Time Zone and Daylight Savings Settings ......................................................... 87
Manual Time Settings ............................................................................................ 88
Custom Language ......................................................................................................... 89
Firmware Upgrade ........................................................................................................ 90
Firmware Server Settings ..................................................................................... 90
Manual Firmware Update and Upload ................................................................ 92
Updating a Cordless Handset/Deskset ............................................................... 92
Provisioning ................................................................................................................... 95
Provisioning Server ................................................................................................ 96
Plug-and-Play Settings .......................................................................................... 96
DHCP Settings ....................................................................................................... 97
Resynchronization ................................................................................................. 97
Import Configuration .............................................................................................. 99
Export Configuration .............................................................................................. 99
Reset Configuration ............................................................................................. 100
Security ......................................................................................................................... 101
Passwords ............................................................................................................. 101
Web Server ........................................................................................................... 102
Trusted Servers .................................................................................................... 102
Trusted IP .............................................................................................................. 103
Certificates ................................................................................................................... 104
Device Certificate ................................................................................................. 104
Trusted Certificate ................................................................................................ 105
TR-069 Settings .......................................................................................................... 106
System Logs ................................................................................................................ 107
Syslog Settings ..................................................................................................... 107
Network Trace ...................................................................................................... 108
Download Log ....................................................................................................... 108
Provisioning Using Configuration Files ................................................... 109
The Provisioning Process ........................................................................................................ 110
Resynchronization: configuration file checking ....................................................... 111
M100 SC restart .......................................................................................................... 111
Configuration File Types .......................................................................................................... 112
Data Files .................................................................................................................................... 113
Configuration File Tips and Security ....................................................................................... 114
Clearing parameters with %NULL in configuration file .......................................... 114
Guidelines for the MAC-Specific configuration file
................................................. 114
Securing configuration files with AES encryption ................................................... 115
Configuration File Parameter Guide ......................................................... 117
"sip_account" Module: SIP Account Settings ........................................................................ 119
General configuration file settings ............................................................................ 119
M100 SC Administrator and Provisioning Manual
5
MAC-specific configuration file settings ................................................................... 129
"hs_settings" Module: Handset Settings ................................................................................ 133
General configuration file settings ............................................................................ 133
MAC-specific configuration file settings ................................................................... 138
“system” Module: System settings .......................................................................................... 139
General configuration file settings ............................................................................ 139
MAC-specific configuration file settings ................................................................... 139
"network" Module: Network Settings ...................................................................................... 140
General configuration file settings ............................................................................ 140
MAC-specific configuration file settings ................................................................... 142
"provisioning" Module: Provisioning Settings ........................................................................ 145
General configuration file settings ............................................................................ 145
MAC-specific configuration file settings ................................................................... 148
"time_date" Module: Time and Date Settings ....................................................................... 150
"log" Module: Log Settings ....................................................................................................... 154
"remoteDir" Module: Remote Directory Settings ................................................................... 155
"web" Module: Web Settings ................................................................................................... 160
“trusted_ip” Module: Trusted IP Settings ............................................................................... 161
“trusted_servers” Module: Trusted Server Settings ............................................................. 162
"user_pref" Module: User Preference Settings ..................................................................... 163
"call_settings" Module: Call Settings ...................................................................................... 164
“audio” Module: Audio Settings ............................................................................................... 166
"file" Module: Imported File Settings ....................................................................................... 168
General configuration file settings ............................................................................ 168
MAC-specific configuration file settings ................................................................... 170
“xml_app” Module: XML App Settings .................................................................................... 171
“tr069” Module: TR-069 Settings ............................................................................................. 172
"tone" Module: Tone Definition Settings ................................................................................ 174
"profile" Module: Password Settings ....................................................................................... 178
General configuration file settings ............................................................................ 178
MAC-specific configuration file settings ................................................................... 179
Troubleshooting ............................................................................................. 180
Common Troubleshooting Procedures .................................................................................. 180
Appendixes ...................................................................................................... 182
Appendix A: Maintenance ........................................................................................................ 182
Appendix B: GNU General Public License ............................................................................ 184
M100 SC Administrator and Provisioning Manual
6
M100 SC Administrator and Provisioning Manual
Back to Contents
Preface
7
P
REFACE
Congratulations on your purchase of this Snom product. Please thoroughly read this
manual for all the feature operations and troubleshooting information necessary to install
and operate your new Snom product. You can also visit our website at
https://service.snom.com.
This administrator and provisioning manual contains detailed instructions for installing and
configuring your M100 SC SIP DECT 8-line Base Station with software version 2.10.60.fe51
or newer. See “Using the Status menu” on page 21 for instructions on checking the software
version on the M100 SC. Please read this manual before installing the product.
Please print this page and record the following information regarding your product:
Model number: M100 SC
Type: SIP DECT 8-line Base Station
Serial number:
Purchase date:
Place of purchase:
Both the model and serial numbers of your Snom product can be found on the bottom of
the device.
Save your sales receipt and original packaging in case it is necessary to return your
telephone for warranty service.
M100 SC Administrator and Provisioning Manual
Back to Contents
Preface
8
Text Conventions
Table 1 lists text formats and describes how they are used in this guide.
Table 1. Description of Text Conventions
Screen Identifies text that appears on a device screen or a
WebUI page in a title, menu, or prompt.
HARD KEY or DIAL-PAD KEY Identifies a hard key, including the dial-pad keys.
CallFwd Identifies a soft key.
Example of a Note.
Example of a Caution.
Audience
This guide is written for installers and system administrators. It assumes that you are
familiar with networks and VoIP, both in theory and in practice. This guide also assumes
that you have ordered your IP PBX equipment or service and selected which PBX features
you want to implement. This guide references specific IP PBX equipment or services only
for features or settings that have been designed for a specific service. Please consult your
equipment supplier or service provider for recommended switches, routers, and firewall
and NAT traversal settings, and so on.
As the M100 SC SIP DECT 8-line base station becomes certified for IP PBX equipment or
services, Snom may publish interop guides for those specific services. The interop guides
will recommend second-party devices and settings, along with M100 SC-specific
configurations for optimal performance with those services. For the latest updates, visit our
website at service.snom.com.
Related Documents
The M100 SC Quick Installation Guide contains a quick reference guide to the M100
SC external features and brief instructions on connecting the M100 SC to a working IP
PBX system.
The M10 SC User manual contains a quick reference guide, full installation instructions, instructions
for making and receiving calls, and a guide to all user-configurable settings.
The documents are available from our website at service.snom.com.
Notes provide important information
about a feature or procedure.
A caution means that loss of data or
unintended circumstances may result.
Text Format Description
M100 SC Administrator and Provisioning Manual
Back to Contents
9
C H A P T E R 1
I
NTRODUCING THE
M100 SC
This administrator and provisioning guide contains detailed instructions for configuring the
M100 SC SIP DECT 8-line Base Station. Please read this guide before attempting to
configure the M100 SC.
Some of the configuration tasks described in this chapter are duplicated in the Web User
Interface (WebUI) described in the next chapter, but if you need to assign static IP
addresses, they must be set at each device.
This chapter covers:
“About the M100 SC 8-line base station” on page 10
“Quick Reference Guide” on page 11
“Network Requirements” on page 13
“M100 SC Configuration Methods” on page 14
M100 SC Administrator and Provisioning Manual
Back to Contents
10
About the M100 SC 8-line base station
The Snom M100 SC SIP DECT 8-line Base Station with M10 SC cordless handset is a
cordless business phone system designed to work with popular SIP telephone (IP PBX)
equipment and services. Once you have ordered and configured your SIP equipment or
service, the M100 SC and cordless accessories enable you to make and receive calls as
you would with any other business phone.
The M100 SC 8-line base station features include:
Up to 8 SIP account registrations
Up to 6 active SIP sessions (across all handsets and cordless desksets)
Registration of up to 10 DECT cordless handsets
Shared call usage (held call pick up, call barge in to conference) on single SIP
account among multiple users
Power over Ethernet
Handset locator
1,000-entry base directory with entries shared on all registered handsets and
desksets
The M10 SC cordless handset features include:
4 dedicated Line keys for Key System experience
Backlit Liquid Crystal Display
Speakerphone, hold, intercom and mute capability
Corded headset jack
3-way conferencing
200-entry call history
500-entry local directory
You can configure the M100 SC using the menus on the M10 SC handset, a
browser-based interface called the WebUI, or an automatic provisioning process (see
“Provisioning Using Configuration Files” on page 109). The WebUI enables you to
configure the M100 SC using a computer that is connected to the same Local Area
Network. The WebUI resides on the M100 SC, and may get updated with firmware
updates.
M100 SC Administrator and Provisioning Manual
Back to Contents
11
Quick Reference Guide
The external features of the M100 SC 8-line base station and handset are described
below.
Handset Locator
(Page) button
Press to ring the cordless
accessories
Press and hold to register
cordless accessories.
LED (Power)
Flashes when joining the
network or when registering/
deregistering a cordless
accessory.
Steady when power is
connected and an
IP address is acquired.
LED
Flashes when registering/
deregistering a cordless
accessory.
Steady when all SIP accounts
are registered.
Off when a SIP account is not
registered.
Front
Antenna
AC adapter input
Reset button
Press for
15 seconds to
restore factory
defaults. If the reset
is successful, the
LED will flash
slowly.
Ethernet port
Rear
M100 SC Administrator and Provisioning Manual
Back to Contents
12
Cordless handset external features
HEADSET JACK
2.5 mm jack for
connecting a corded
headset.
SOFT KEYS
Perform the actions
indicated by the on-
screen labels.
L1 - L4
Programmable
feature keys,
preprogrammed
as line keys for
accessing shared
calls.
CID
While in menus, press to
scroll down the menu.
Press to display the Call
history.
HOLD
Press to put a call on hold.
On back:
BELT CLIP
SPEAKER
MESSAGES LED
Flashes when a line has
a new voice message.
VOLUME + / -
During a call: increase or
decrease listening volume.
When idle: increase or
decrease ringer volume.
INT
Press to make an internal
(intercom) call to another
handset/deskset.
DIR
While in menus, press
to scroll up the menu.
Press to display the
Directory.
MENU/SELECT
Press to display the main
menu.
Press to select a menu item.
OFF/CANCEL
Press to end a call.
Press to cancel an operation
and leave a menu.
Dial pad and audio controls
DIAL PAD
SPEAKER
Press to use the handset
speakerphone.
REDIAL/PAUSE
Press to redial a number
or enter a pause when
programming a phone number.
HANDSET LOCK
Press and hold to lock
handset keys and prevent
accidental key presses.
MUTE/DELETE
During a call, press to prevent
your voice from being heard.
While entering numbers
or letters, press to delete
previous character.
M100 SC Administrator and Provisioning Manual
Back to Contents
13
Network Requirements
A switched network topology is recommended for your LAN (using standard 10/100
Ethernet switches that carry traffic at a nominal rate of 100 Mbit/s).
The office LAN infrastructure should use Cat.-5/Cat.-5e cable.
The M100 SC requires a wired connection to the LAN. However, wireless connections
from your LAN to other devices (such as laptops) in your office will not impede performance.
A Dynamic Host Configuration Protocol (DHCP) server is recommended and must be on
the same subnet as the M100 SC 8-line base stations so that IP addresses can be
auto-
assigned. In most cases, your network router will have a DHCP server. By default, the
M100 SC has DHCP enabled for automatic IP address assignment.
Some DHCP servers have default settings that limit the number of network IP
addresses assigned to devices on the network. You should log in to your server
to confirm that the IP range is sufficient.
If no DHCP server is present, you can assign a static IP to the M100 SC. You can assign a
static IP address using the M100 SC menu. To assign a static IP: On the
handset/deskset Main menu, go to Admin settings > Network setting > IPv4 (or IPv6) >
Set static IP.
If you do not have a DHCP server or do not manually assign static IPs, you will not be able
to access the WebUI and/or enable automatic time updates from an NTP server.
A DNS server is recommended to resolve the path to the Internet and to a server for
firmware and configuration updates. If necessary, the system administrator can also
download upgrade files and use the WebUI to update the M100 SC firmware and/or
configuration settings manually
Figure 1. M100 SC Installation Example
M100 SC Administrator and Provisioning Manual
Back to Contents
14
M100 SC Configuration Methods
You can configure the M100 SC using one of the following methods:
From the M10 SC handset using the handset menus. The M10 SC menus are
best suited to configuring a few settings, perhaps after the initial setup has been
done. For administrators, the settings available on the M10 SC menus include
network settings, account settings, and provisioning settings. See “Using the
Admin Settings Menu” on page 24. Many of the settings accessible on the M10
SC are most useful for end users. Through the menu, they can customize the
screen appearance, sounds, and manage calls. For more information, see the
M100 SC/M10 SC User Guide.
The Web User Interface, or WebUI, which you access using your Internet browser.
See “Using the WebUI” on page 35. The browser-based interface is easy to
navigate and best suited to configuring a large number of M100 SC settings at
once. The WebUI gives you access to every setting required for configuring a
single device. You can enter service provider account settings on the WebUI,
assign accounts to handsets, and set up provisioning, which will allow you to
automatically and remotely update the M100 SC after initial configuration.
Provisioning using configuration files. Working with configuration files allows you to
configure the device at regular intervals. There are several methods available to
enable the M100 SC to locate and upload the configuration file. For example, you
can enable the M100 SC, when it starts up or reboots, to check for the presence
of a configuration file on a provisioning server. If the configuration file is new or has
been modified in any way, the M100 SC automatically downloads the file and
applies the new settings. For more information, see Provisioning Using
Configuration Files” on page 109.
M100 SC Administrator and Provisioning Manual
Back to Contents
15
Using Shared Calls
Your system allows shared calls usage among multiple handset users on a SIP account.
Incoming calls on an account can alert multiple handsets and be answered by any one of
them. Multiple handsets can share an account for outgoing calls. This can be achieved via
Account Assignments. For more details, see “Account Assignments” on page 55.
Typical call sharing operations like held call pick up and barge-in conference among
handset users can be achieved via KeyLine Assignments. For more details, see “KeyLine
Assignments” on page 57.
Each "KeyLine" number, when assigned to a shared call, behaves as a virtual "Line"
number allowing easy, yet unique reference across multiple handset users.
Using our default configuration for KeyLine as an example, any incoming/outgoing call on
account 1 will get assigned a KeyLine number. The lowest unoccupied KeyLine number will
typically be assigned first.
Please see the following scenarios to see how the KeyLine number can be utilized among
users via the Call List.
M100 SC Administrator and Provisioning Manual
Back to Contents
16
Example - barging in a shared call:
Alice’s handset
Bob’s handset
1. Alice is on a call.
2. Alice shouts across the room,
“Bob, can you join my call on
line 3?”
3. Bob presses CALLS to
display the Call List, and
presses to select the call on
line 3.
4. Bob presses BARGE to
barge in the call.
Bob is now in a conference call with
Alice and the caller on line 3.
M100 SC Administrator and Provisioning Manual
Back to Contents
17
Example - picking up a held shared call:
Alice’s handset
Bob’s handset
1. Alice is on a call.
2. Alice presses
HOLD
to put the
call on hold.
3. Alice shouts across the room,
“Bob, can you pick up line 2?”
4. Bob presses
CALLS
to
display the Call List, and
presses
to select the call on
line 2.
5. Bob presses
RESUME
to pick
up the call.
The call is now on Bob’s handset.
Calls made on an account without assigning to any KeyLine number are considered to be
private calls and will not be visible on the Call List of other handsets.
M100 SC Administrator and Provisioning Manual
Back to Contents
18
Key System Emulation
Each cordless handset or deskset is equipped with four line keys (L1 to L4) to to allow
similar usage experience as a typical Key system.
By assigning each Line key to a KeyLine number as done with our factory setting, the user
can interact directly with shared calls and perform held call and barge-in conference via
pressing the Line key (L1 to L4).
The following scenarios illustrate a Key system experience via direct interactions with the
Line keys.
Example - barging in a shared call:
Alice’s handset
Bob’s handset
1. Alice is on a call.
2. Alice shouts across the room,
“Bob, can you join my call on
line 3?”
3. Bob presses
L3
to
barge in the call.
Bob is now in a conference call with
Alice and the caller on line 3.
M100 SC Administrator and Provisioning Manual
Back to Contents
19
Example - picking up a held shared call:
Alice’s handset
Bob’s handset
1. Alice is on a call.
2. Alice presses HOLD to put
the call on hold.
3. Alice shouts across the room,
“Bob, can you pick up line 2?”
4. Bob presses L2 to pick up the
call.
The call is now on Bob’s handset.
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration Using the Phone Menus
20
C H A P T E R 2
C
ONFIGURATION
U
SING THE
P
HONE
M
ENUS
The M100 SC Main Menu has the following sub-menus:
Messageaccess the voice messages on each account.
Directoryview and dial directory and blacklist entries.
Call historyview missed calls, received calls and dialed calls.
Intercomcall other handsets.
Speed dialview and edit speed dial entries.
Featuresset DND, call forward settings and other calling features.
Statusview the handset and base station network status, account registration
status, and product information.
User settingsallows the user to set the language for the display, configure the
appearance of the display, set date and time, and customize the audio settings.
Admin settingsconfigure network settings (enter static IP addresses, for
example), account settings and provisioning settings.
This chapter contains instructions for using the Admin Settings menu and for accessing the
Status menu. See the M100 SC/M10 SC User Guide for more information about the other
menus.
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration Using the Phone Menus
21
Viewing the Main Menu
To use the M10 SC menu:
When the M10 SC is idle, press MENU/SELECT.
The Main Menu appears.
1.
Press
or
to highlight the desired sub-menu, and then press
MENU/SELECT
.
Press SELECT or an appropriate soft key to save changes.
Press OFF/CANCEL to cancel an operation, exit the menu display or return to the
idle screen.
Using the Status menu
Use the Status menu to verify network settings and begin troubleshooting if network
problems or account registration issues affect operation.
You can also find the software version of the M100 SC on the Product Info screen,
available from the Status menu.
To view the Status menu:
1.
When the M10 SC is idle, press MENU/SELECT.
2.
On the
Main Menu
, press
or
to highlight
Status
, and then press
MENU/SELECT.
The Status menu appears.
Status
Network
Line
Product info
BACK
ENTER
3.
On the
Status
menu, press
or
to highlight the desired menu, and then press
MENU/SELECT.
The available status menus are listed in Table 2.
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration Using the Phone Menus
22
Table 2. Status menu summary
1.
Network IP address
DHCP status (Enabled/Disabled)
Subnet Mask
Gateway IP address
DNS server 1 IP address
DNS server 2 IP address
IPv4 / IPv6
VLAN ID
2.
Line Lines and registration status. On the Line menu, highlight
and select the desired line to view detailed line status
information:
Line status (Registered/Not registered)
Account display name
Account User ID
Server IP address
3.
Product Info Shows the product info for the handset or base station.
Select Handset or Base to view the:
Model number (handset only)
Serial number (handset only)
Firmware version
V-Series
Hardware version
IPEI (handset only)
Menu Information listed
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration Using the Phone Menus
23
Viewing Line status
To view line status, from the Status menu, select Line. The Line menu lists the available
lines, along with icons indicating each line's current registration status.
Line
John 201
Dawn 202
Larry 203
Ellie 204
BACK
ENTER
Table 3. Line status icons
Line registered
Line unregistered
To view complete status information for a line:
On the
Line
menu, press
or
to highlight the desired line, and then press
MENU/SELECT. The full line status screen appears.
Icon Description
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration Using the Phone Menus
24
Using the Admin Settings Menu
To access the Admin Settings menu:
1.
When the M10 SC is idle, press MENU/SELECT.
The Main Menu appears.
2.
Press or to highlight Admin settings, and then press MENU/SELECT.
3.
Use the dial pad to enter the admin password, and then press ENTER . The default
password is admin (press the * key to enable entering lower-case letters).
The Admin settings are listed in Table 4.
Table 4. Admin setting summary
Network setting IPv4 / IPv6
DHCP (Enable, Disable)
Set static IP
VLAN ID
Security Secure Browsing
Provisioning Server string
Login ID
Login PW
Edit PIN code Edit PIN
Firmware update Select Firmware update to have the handset check
whether a firmware update is available. See “Updating a
Cordless Handset/Deskset” on page 92.
Setting Options
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration Using the Phone Menus
25
Using the Network Setting menu
Use the Network setting menu to configure network-related settings for the M100 SC. For
more information about these settings, see “Basic Network Settings” on page 69 and
“Advanced Network Settings” on page 71.
To use the Network setting menu:
1.
From the
Admin Settings
menu, press
or
to highlight
Network setting
, and
then press MENU/SELECT.
The Network setting menu appears.
2.
Press
or
to highlight the desired option, and then press
MENU/SELECT
:
Network setting
DHCP
Set static IP
VLAN ID
Others
BACK
ENTER
IPv4 / IPv6
DHCP
Set static IP
VLAN ID
Others (DNS and NTP servers).
To enable or disable DHCP:
1.
From the
Network setting
menu, press
or
to highlight
DHCP
, and then press
MENU/SELECT.
The DHCP screen appears.
2.
Press
or
to select
Enabled
or
Disabled
, and then press
SET .
DHCP is enabled by default, which means the M100 SC will get its IP address from the
network. When DHCP is disabled, you must enter a static IP address for the M100 SC.
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration Using the Phone Menus
26
You must be familiar with TCP/IP principles and protocols to configure static IP
settings.
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration Using the Phone Menus
27
To set static IP for the M100 SC:
1.
From the
Network setting
menu, select IPv4 or IPv6, then press
or
to
highlight
Set static IP
, and then
press MENU/SELECT.
If DHCP is disabled, the Set static IP menu appears. If DHCP is enabled, an error
message appears briefly before returning you to the Network setting menu.
2.
On the Set static IP menu, with IP Address highlighted, press MENU/SELECT.
3.
Enter the Static IP Address.
Press BACKSPC to delete numbers.
Use the dial pad to enter numbers.
To add a period, press the * key.
4.
Press SAVE .
5.
On the
Set static IP
menu, press
or
to highlight
Subnet Mask
, and then press
MENU/SELECT.
6.
Enter the Subnet Mask.
Press BACKSPC to delete numbers.
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration Using the Phone Menus
28
Use the dial pad to enter numbers.
To add a period, press the * key.
7.
Press SAVE .
8.
On the
Set static IP
menu, press
or
to highlight
Gateway
, and then press
MENU/SELECT.
9.
Enter the Gateway.
Press BACKSPC to delete numbers.
Use the dial pad to enter numbers.
To add a period, press the * key.
10.
Enter DNS1 and DNS2.
11.
Press SAVE .
To set the VLAN ID for the M100 SC:
1.
From the
Network setting
menu, press
or
to highlight
VLAN ID
, and then
press MENU/SELECT.
2.
On the VLAN ID menu, with WAN port highlighted, press MENU/SELECT.
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration Using the Phone Menus
29
3.
Press
or
to select
Enabled
or
Disabled
, and then press
SET .
4.
On the
VLAN ID
menu, press
or
to highlight
VID
, and then press
MENU/SELECT.
5.
Enter the WAN VID. The valid range is 0 to 4095.
Use the dial pad to enter numbers.
Press BACKSPC to delete numbers.
6.
Press SAVE .
7.
On the
VLAN ID
menu, press
or
to highlight
Priority
, and then press
MENU/SELECT.
8.
Enter the WAN Priority. The valid range is 0 to 7.
Use the dial pad to enter numbers.
Press BACKSPC to delete numbers.
9.
Press SAVE .
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration Using the Phone Menus
30
To set DNS and NTP:
1.
From the
Network setting
menu, press
or
to highlight
DNS 1, then press
MENU/SELECT.
2.
Enter the IP address for the primary DNS server.
Press BACKSPC to delete numbers.
Use the dial pad to enter numbers.
3.
Press SAVE .
4.
Press
or
to highlight
DNS 2
, and then press
MENU/SELECT.
5.
Enter the IP address for the secondary DNS server. The M100 SC uses this server if
the primary server does not respond.
Press BACKSPC to delete numbers.
Use the dial pad to enter numbers.
6.
Press SAVE .
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration Using the Phone Menus
31
Using the Security menu
Use the Security menu to configure secure browsing settings.
To turn on/off secure browsing:
1.
From the
Admin Settings
menu, press
to highlight
Security
, and then press
MENU/SELECT.
The Security menu appears.
2.
With Secure Browsing selected, press ENTER .
3.
Press
or
to select
Enabled
or
Disabled
, and then press
ENTER
.
4.
Press NO or YES on the message “Reboot Base to apply new Web Server
settings?”
Using the Provisioning menu
Use the Provisioning menu to configure auto-provisioning settings. For more information
about auto-provisioning, see “Provisioning” on page 95 and “Provisioning Using
Configuration Files” on page 109.
On the Provisioning menu you can configure:
Server stringthe URL of the provisioning server. The URL can include a complete
path to the configuration file.
Login IDthe username the M100 SC will use to access the provisioning server.
Login PWthe password the M100 SC will use to access the provisioning server.
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration Using the Phone Menus
32
To use the Provisioning menu:
1.
From the Admin Settings menu, press to highlight Provisioning, and then press
SELECT.
The Provisioning menu appears.
2.
On the Provisioning menu, with Server string highlighted, press MENU/SELECT.
3.
Enter the URL of the provisioning server.
Press BACKSPC to delete numbers.
Press 1, 0 and # to enter symbols. The period and “@” symbols are available under
the 0 key.
Use the dial pad to enter numbers.
The format of the URL must be RFC 1738 compliant, as follows:
"<schema>://<user>:<password>@<host>:<port>/<url-path>"
"<user>:<password>@" may be empty.
"<port>" can be omitted if you do not need to specify the port number.
4.
Press SAVE .
5.
On the
Provisioning
menu, press
or
to highlight
Login ID
, and then press
MENU/SELECT.
6.
Enter the Login ID for access to the provisioning server if it is not part of the server
string.
Press BACKSPC to delete numbers.
Use the dial pad to enter numbers.
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration Using the Phone Menus
33
7.
Press SAVE .
8.
On the
Provisioning
menu, press
or
to highlight
Login PW
, and then press
MENU/SELECT.
9.
Enter the Login password.
Press BACKSPC to delete numbers.
Use the dial pad to enter numbers.
10.
Press SAVE .
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration Using the Phone Menus
34
Editing the handset PIN code
The PIN code is a four-digit code that you use to deregister the handset from the base. The
default PIN is 0000. Changing the PIN on the handset will change the PIN for all registered
handsets.
To edit the PIN code:
1.
From the Admin Settings menu, press
to highlight
Edit PIN code
, and then press
SELECT.
The Enter old PIN screen appears.
2.
Enter the current PIN using the dial pad keys.
3.
Press NEXT .
4.
Enter the new PIN, and then press NEXT .
5.
Confirm the new PIN, and then press NEXT .
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
35
U
SING THE
W
EB
UI
C H A P T E R 3
The WebUI allows you to configure all aspects of M100 SC 8-line base station operation,
including account settings, network settings, contact lists, and provisioning settings. The
WebUI is embedded in the M100 SC operating system. When you access the WebUI, you
are accessing it on the device, not on the Internet.
This chapter describes how to access the WebUI and configure M100 SC settings. This
chapter covers:
“Using the Web User Interface (WebUI)” on page 36
“Status Page” on page 38
“System Pages” on page 40
“Network Pages on page 68
“Contacts Pages” on page 74
“Servicing Pages” on page 86.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
36
Using the Web User Interface (WebUI)
The Web User Interface (WebUI) resides on the M100 SC 8-line base station. You can
access it using an Internet browser. After you log in to the WebUI, you can configure the
M100 SC on the following pages:
System Contacts
SIP Account Management (see page 40)
Call Settings (see page 53)
User Preferences (see page 55)
Handset Settings (see page 55)
Server Application (see page 63)
Network
Basic Network Settings (see page 69)
Base Directory (see page 74)
Blacklist
LDAP (see page 81)
Servicing
Reboot (see page 86)
Time and Date (see page 86)
Firmware Upgrade (see page 90)
Custom language (see page 90)
Advanced Network Settings (see page 71)
Provisioning (see page 95)
Security (see page 101)
Certificates (see page 104)
Tr069 (see page 106)
System Logs (see page 107)
The WebUI also has a System Status and a Handset Status page, where you can view
network status and general information about the M100 SC and handsets. The information
on the Status page matches the Status menu available on the M10 SC handset.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
37
To access the WebUI:
1.
Ensure that your computer is connected to the same network as the M100 SC.
2.
Find the IP address of the M100 SC:
a.
On a handset, press MENU/SELECT .
b.
Press
to highlight
Status
, and then press
MENU/SELECT
.
c.
With Network highlighted, press MENU/SELECT.
Network status screen appears.
d.
Select IPv4 or IPv6, then note the IP address.
3.
On your computer, open an Internet browser. (Depending on your browser, some of the
Network
IP Address:
10.88.51.133
DHCP:
Enabled
BACK
OK
pages presented here may look different and have different controls. Ensure that you
are running the latest update of your preferred browser.)
4.
Type the M100 SC IP address in the browser address bar and press ENTER on your
computer keyboard.
The browser displays a window asking for your user name and password.
5.
For the user name, enter admin. For the password, enter the default password,
admin. You can change the password later on the WebUI Security page, available
under Servicing.
6.
Click OK.
The WebUI appears.
Click topics from the navigation bar along the top of the WebUI, and then click the links
along the left to view individual pages. For your security, the WebUI times out after 10
minutes, so if it is idle for that time, you must log in again.
Most WebUI configuration pages have a button. Click to save changes
you have made on the page. During a configuration session, click before you
move on to the next WebUI page.
The remaining procedures in this section assume that you are already logged into the WebUI.
The settings tables in this section contain settings that appear in the WebUI and
their equivalent settings in the configuration file template. You can use the
configuration file template to create custom configuration files. Configuration files
can be hosted on a provisioning server and used for automatically configuring
phones. For more information, see “Provisioning Using Configuration Files” on
page 109.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
38
Status Page
On the Status pages, you can view network status and general information about the base
station and handsets. Some of the information on the Status pages is also available on the
Status menu available on the handset.
System Status
The System Status page shows:
General information about your device, including model, MAC address, and
firmware version
Account Status information about your SIP account registration
Network information regarding your device’s network address and network
connection
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
39
Handset Status
The handset status page shows the name and registration status of cordless handsets. The
page lists the maximum of 10 handsets, even if fewer handsets are registered. If you have
not given the handsets unique names, the default name of “HANDSET” appears.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
40
System Pages
SIP Account Management
On the SIP Account Management pages, you can configure each account you have
ordered from your service provider.
The SIP Account settings are also available as parameters in the configuration file.
See “"sip_account" Module: SIP Account Settings” on page 119.
General Account Settings
Click the link for each setting to see the matching configuration file parameter in
“Configuration File Parameter Guide” on page 117. Default values and ranges are listed
there.
Setting Description
Enable Account Enable or disable the SIP account. Select to enable.
Account label Enter the name that will appear on the M10 SC display
when account x is selected. The Account Label identifies
the SIP account throughout the WebUI and on the handset
Dialing Line menu.
Display Name Enter the Display Name. The Display Name is the text
portion of the caller ID that is displayed for outgoing calls
using account x.
User Identifier Enter the User identifier supplied by your service provider.
The User ID, also known as the Account ID, is a SIP URI
field used for SIP registration.
Note
: Do not enter the host name (e.g. "@sipservice.com").
The WebUI automatically adds the default host name.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
41
Setting Description
Authentication Name If authentication is enabled on the server, enter the
authentication name (or authentication ID) for
authentication with the server.
Authentication Password If authentication is enabled on the server, enter the
authentication password for authentication with the server.
Dial Plan Enter the dial plan, with dialing strings separated by a |
symbol. See “Dial Plan” on page 42.
Inter Digit Timeout (secs) Sets how long the M10 SC waits after any "P" (pause) in
the dial string or in the dial plan.
Maximum Number of
Calls
Select the maximum number of concurrent active calls
allowed for that account.
Feature Synchronization Enables the M100 SC to synchronize with BroadWorks
Application Server. Changes to features such as DND, Call
Forward All, Call Forward No Answer, and Call Forward
Busy on the server side will also update the settings on the
M10 SC menu and WebUI. Similarly, changes made using
the M10 SC or WebUI will update the settings on the
server.
DTMF method Select the default DTMF transmission method. You may
need to adjust this if call quality problems are triggering
unwanted DTMF tones or you have problems sending
DTMF tones in general.
Unregister after reboot Enables the phone to unregister the account(s) after
rebooting-before the account(s) register again as the
phone starts up. If other phones that share the same
account(s) unregister unexpectedly in tandem with the
rebooting M100 SC, disable this setting.
Call Rejection Response
Code
Select the response code for call rejection. This code
applies to the following call rejection cases:
User presses Reject for an incoming call (except
when Call Forward Busy is enabled)
DND is enabled
Phone rejects a second incoming call with Call
Waiting disabled
Phone rejects an anonymous call with Anonymous
Call Rejection enabled
Phone rejects call when the maximum number of
calls is reached
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
42
Dial Plan
The dial plan consists of a series of dialing rules, or strings, that determine whether what
the user has dialed is valid and when the M10 SC should dial the number.
Numbers that are dialed when forwarding a callwhen the user manually
forwards a call, or a pre-configured number is dialed for Call Forward All, Call
ForwardNo Answer, or Call Forward Busyalways bypass the dial plan.
Dialing rules must consist of the elements defined in the table below.
Element Description
x
Any dial pad key from 0 to 9, including # and *.
[0-9] Any two numbers separated by a hyphen, where the second number is
greater than the first. All numbers within the range or valid, excluding # and *.
x+ An unlimited series of digits.
,
This represents the playing of a secondary dial tone after the user enters the
digit(s) specified or dials an external call prefix before the comma. For
instance, "9,xxxxxxx" means the secondary dial tone is played after the user
dials 9 until any new digit is entered. "9,3xxxxxx" means only when the digit
3 is hit would the secondary dial tone stop playing.
PX This represents a pause of a defined time; X is the pause duration in
seconds. For instance, "P3" would represent pause duration of 3 seconds.
When "P" only is used, the pause time is the same as the Inter Digit Timeout
(see “SIP Account Management on page 40).
(0:9) This is a substitution rule where the first number is replaced by the second.
For example, "(4:723)xxxx" would replace "46789" with "723-6789". If the
substituted number (the first number) is empty, the second number is added
to the number dialed. For example, in "(:1)xxxxxxxxxx", the digit 1 is
appended to any 10-digit number dialed.
|
This separator is used to indicate the start of a new pattern. Can be used to
add multiple dialing rules to one pattern edit box.
A sample dial plan appears below.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
43
SIP Server Settings
Setting Description
Server address Enter the IP address or domain name for the SIP server.
Port Enter the port number that the SIP server will use.
Registration Settings
Setting Description
Server address Enter the IP address or domain name for the registrar
server.
Port Enter the port number that the registrar server will use.
Expiration (secs) Enter the desired registration expiry time in seconds.
Registration Freq (secs) Enter the desired registration retry frequency in seconds.
If registration using the Primary Outbound Proxy fails, the
Registration Freq setting determines the number of
seconds before a registration attempt is made using the
Backup Outbound Proxy.
Outbound Proxy Settings
Setting Description
Server Address Enter the IP address or domain name for the proxy server.
Port Enter the port number that the proxy server will use.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
44
Backup Outbound Proxy Settings
Setting Description
Server address Enter the IP address or domain name for the backup proxy server.
Port Enter the port number that the backup proxy server will use.
Caller Identity Settings
Setting Description
Source Priority 1 Select the desired caller ID source to be displayed on the incoming
call screen: “From” field, RPID (Remote-Party ID) or PAI
(P-Asserted Identity) header.
Source Priority 2 Select the lower-priority caller ID source.
Source Priority 3 Select the lowest-priority caller ID source.
Audio Settings
Setting Description
Codec priority 1 Select the codec to be used first during a call.
Codec priority 2 Select the codec to be used second during a call if the
previous codec fails.
Codec priority 3 Select the codec to be used third during a call if the
previous codec fails.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
45
Setting Description
Codec priority 4 Select the codec to be used fourth during a call if the
previous codec fails.
Codec priority 5 Select the codec to be used fifth during a call if the previous
codec fails.
Codec priority 6 Select the codec to be used sixth during a call if the
previous codec fails.
Codec priority 7 Select the codec to be used seventh during a call if the
previous codec fails.
Enable voice encryption
(SRTP)
Select to enable secure RTP for voice packets.
Enable G.729 Annex B When G.729a/b is enabled, select to enable G.729
Annex B, with voice activity detection (VAD) and
bandwidth-conserving silence suppression.
Preferred Packetization
Time (ms)
Select the packetization interval time.
DTMF Payload Type Set the DTMF payload type for in-call DTMF from 96–127.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
46
Quality of Service
Setting Description
DSCP (voice) Enter the Differentiated Services Code Point (DSCP) value
from the Quality of Service setting on your router or switch.
DSCP (signalling) Enter the Differentiated Services Code Point (DSCP) value
from the Quality of Service setting on your router or switch.
Signaling Settings
Setting Description
Local SIP port Enter the local SIP port.
Transport Select the SIP transport protocol:
TCP (Transmission Control Protocol) is the most
reliable protocol and includes error checking and
delivery validation.
UDP (User Datagram Protocol) is generally less prone
to latency, but SIP data may be subject to network
congestion.
TLS (Transport Layer Security)the M100 SC
supports secured SIP signalling via TLS. Optional server
authentication is supported via user-uploaded
certificates. TLS certificates are uploaded using the
configuration file. See “"file" Module: Imported File
Settings” on page 168 and consult your service
provider.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
47
Voice Settings
Setting Description
Min Local RTP Port
Enter the lower limit of the Real-time Transport Protocol (RTP)
port range. RTP ports specify the minimum and maximum port
values that the phone will use for RTP packets.
Max Local RTP Port Enter the upper limit of the RTP port range.
Feature Access Codes Settings
If your IP PBX service provider uses feature access codes, then enter the applicable codes
here.
Setting Description
Voicemail Enter the voicemail access code. The code is dialed when
the user selects a line from the Message menu.
DND ON Enter the Do Not Disturb ON access code.
DND OFF Enter the Do Not Disturb OFF access code.
Call Forward All ON Enter the Call Forward All ON access code.
Call Forward All OFF Enter the Call Forward All OFF access code.
Call Forward No Answer
ON
Enter the Call Forward No Answer ON access code.
Call Forward No Answer
OFF
Enter the Call Forward No Answer OFF access code.
Call Forward Busy ON Enter the Call Forward Busy ON access code.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
48
Setting Description
Call Forward Busy OFF Enter the Call Forward Busy OFF access code.
Anonymous Call Reject
ON
Enter the Anonymous Call Reject ON access code.
Anonymous Call Reject
OFF
Enter the Anonymous Call Reject OFF access code.
Anonymous Call ON Enter the Anonymous Call ON access code.
Anonymous Call OFF Enter the Anonymous Call OFF access code.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
49
Voicemail Settings
Setting Description
Enable MWI
Subscription
When enabled, the account subscribes to the "message
summary" event package. The account may use the User
ID or the service provider's "Mailbox ID".
Mailbox ID Enter the URI for the mailbox ID. The phone uses this URI
for the MWI subscription. If left blank, the User ID is used
for the MWI subscription.
Expiration (secs) Enter the MWI subscription expiry time (in seconds) for
account x.
Ignore unsolicited MWI
When selected, unsolicited
MWI
notificationsnotifications
in addition to, or instead of SUBSCRIBE and NOTIFY
methodsare ignored for account x. If the M100 SC
receives unsolicited MWI notifications, the Message
Waiting LED will not light to indicate new messages.
Disable this setting if:
MWI service does not involve a subscription to a
voicemail server. That is, the server supports
unsolicited MWI notifications.
you want the Message Waiting LED to indicate new
messages when the M100 SC receives unsolicited
MWI notifications.
NAT Traversal
Setting Description
Enable STUN
Enables or disables STUN (Simple Traversal of UDP through
NATs) for account x. The Enable STUN setting allows the
M100 SC to identify its publicly addressable information
behind a NAT via communicating with a STUN server.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
50
Setting Description
Server Address Enter the STUN server IP address or domain name.
Port Enter the STUN server port.
Enable STUN
Keep-Alive
Enables or disables UDP keep-alives. Keep-alive packets
are used to maintain connections established through NAT.
Keep-Alive Interval
(secs)
Enter the interval (in seconds) for sending UDP keep-alives.
Music on Hold Settings
Setting Description
Enable Local MoH Enables or disables a hold-reminder tone that the user
hears when a far-end caller puts the call on hold.
Network Conference Settings
Setting Description
Enable Network
Conference
Enables or disables network conferencing for account x.
Conference URI Enter the URI for the network bridge for conference
handling on account x.
Session Timer
Setting Description
Enable Session Timer Enables or disables the SIP session timer. The session
timer allows a periodic refreshing of a SIP session using
the RE-INVITE message.
Minimum Value (secs) Sets the session timer minimum value (in seconds) for
account x.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
51
Setting Description
Maximum Value (secs) Sets the session timer maximum value (in seconds) for
account x.
Jitter Buffer
Setting Description
Fixed Enable fixed jitter buffer mode.
Fixed Delay (ms) If Fixed is selected, enter the fixed jitter delay.
Adaptive Enable adaptive jitter buffer mode.
Normal Delay (ms) If Adaptive is selected, enter the normal or “target” delay.
Minimum Delay (ms) Enter the minimum delay.
Maximum Delay (ms) Enter the maximum delay. This time, in milliseconds, must
be at least twice the minimum delay.
Keep Alive
Setting Description
Enable Keep Alive Enable SIP keep alive in service of NAT traversal and as a
heartbeat mechanism to audit the SIP server health status.
Once enabled, OPTIONS traffic should be sent whenever
the account is registered. OPTIONS traffic will occur
periodically according to the keep-alive interval.
Keep Alive interval
(secs)
Set the interval at which the OPTIONS for the keep-alive
mechanism are sent.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
52
Setting Description
Ignore Keep Alive
Failure
Enable the phone to ignore keep-alive failure, if the failure
can trigger account re-registration and re-subscription (and
active calls are dropped).
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
53
Call Settings
You can configure call settings for each account. Call Settings include Do Not Disturb and
Call Forward settings.
The call settings are also available as parameters in the configuration file. See
“"call_settings" Module: Call Settings” on page 164.
General Call Settings
Setting Description
Anonymous Call Reject Enables or disables rejecting calls indicated as
"Anonymous."
Enable Anonymous Call Enables or disables outgoing anonymous calls. When
enabled, the caller name and number are indicated as
"Anonymous."
Do Not Disturb
Setting Description
Enable DND Turns Do Not Disturb on or off.
Call Forward
Setting Description
Enable Call Forward
Always
Enables or disables call forwarding for all calls on that line.
Select to enable.
Target Number Enter a number to which all calls will be forwarded.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
54
Setting Description
Enable Call Forward
Busy
Enables or disables forwarding incoming calls to the target
number if:
the number of active calls has reached the maximum
number of calls configured for account x
Call Waiting Off is selected.
Target Number Enter a number to which calls will be forwarded when Call
Forward Busy is enabled.
Enable Call Forward No
Answer
Enables or disables call forwarding for unanswered calls
on that line.
Target Number Enter a number to which unanswered calls will be
forwarded.
Delay Select the number of rings before unanswered calls are
forwarded.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
55
User Preferences
On the User Preferences page, you can set the language that appears on the WebUI. The
User Preferences page is also available to phone users when they log on to the WebUI.
The preference settings are also available as parameters in the configuration file.
See “"user_pref" Module: User Preference Settings” on page 163.
General User Settings
Click the link for each setting to see the matching configuration file parameter in
“Configuration File Parameter Guide” on page 117. Default values and ranges are listed
there.
Setting Description
WebUI Language Sets the language that appears on the WebUI.
Handset Settings
The Handset Settings allow you to configure account assignments and names for the
cordless handsets that are registered to the base station. For more information on
registering cordless handsets, see the M100 SC/M10 SC User Guide.
The network settings are also available as parameters in the configuration file. See
“"hs_settings" Module: Handset Settings” on page 133.
Account Assignments
The Account Assignments table lists the maximum of 10 handsets, even if there are
fewer handsets registered. The registration status of currently registered handsets does not
affect what is listed on this table.
The table always displays the maximum eight accounts, even if there are fewer SIP
accounts enabled.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
56
If you have not entered any unique handset names yet, then the default name of
"HANDSET" appears.
On the Account Assignments table, you can select which accounts will be available for both
incoming and outgoing calls on each handset.
The handset will first attempt to use the account you select under Default when going
off-hook.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
57
KeyLine Assignments
On the KeyLine Assignments page, you can assign accounts to KeyLine numbers.
KeyLine assignments apply to all handsets and desksets registered to the M100 SC SIP
DECT 8-line Base Station.
The KeyLine number is displayed on the handset/deskset when you are on a call or
displaying calls in the Call List. The KeyLine number identifies the line number of a call.
Because a maximum of six active SIP sessions are supported across all handsets and
desksets, you should only configure a maximum of six KeyLine assignments.
The factory default is set to Account 1 for Keyline 1 to 6.
Setting Description
Keyline 1-12 Select the account you want to assign to the corresponding
KeyLine number.
Default values (1-6): Account 1, (7-12): N/A
To enable a Key System experience for your phone system, you must configure the line
keys (L1 to L4) for each handset and deskset. Such configuration is available via the
WebUI, phone user interface, or the configuration file parameters. Each of these methods
are described on the next page.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
58
Web UI:
Select SYSTEM > Handset Settings > Programmable keys. In the Select Handset
setting, select the handset you want to configure.
Under Line Key Settings, assign the KeyLine numbers that match the KeyLine numbers
you configured in the WebUI KeyLine Assignments.
The default configuration to enable a Key System experience is:
Key: Line Key 1, Type: Keyline, Value: 1
Key: Line Key 2, Type: Keyline, Value: 2
Key: Line Key 3, Type: Keyline, Value: 3
Key: Line Key 4, Type: Keyline, Value: 4
For more information, see the “KeyLine*” setting on page 62.
Phone User Interface:
On the handset/deskset, select MENU > User Settings > Progrm’able key > Line key.
For each line key (L1 to L4), assign the KeyLine number that matches the KeyLine numbers
you configured in the WebUI KeyLine Assignments.
The default configuration to enable a Key System experience is:
L1 Type: KeyLine, L1 Value: Index 1
L2 Type: KeyLine, L2 Value: Index 2
L3 Type: KeyLine, L3 Value: Index 3
L4 Type: KeyLine, L4 Value: Index 4
For more information about configuring the line keys (L1 to L4), see
“Configuring the programmable keys” in the M100 SC/M10 SC User Guide.
Configuration parameters:
Import the following parameter values into the M100 SC with the KeyLine numbers that
match the KeyLine numbers you configured in the WebUI KeyLine Assignments. Replace
the “x” in the parameter name with the handset number you want to configure.
The default configuration to enable a Key System experience is:
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
59
hs_settings.x.pfk.line1.account = 1
hs_settings.x.pfk.line1.feature = keyline
hs_settings.x.pfk.line1.value = 1
hs_settings.x.pfk.line2.account = 1
hs_settings.x.pfk.line2.feature = keyline
hs_settings.x.pfk.line2.value = 2
hs_settings.x.pfk.line3.account = 1
hs_settings.x.pfk.line3.feature = keyline
hs_settings.x.pfk.line3.value = 3
hs_settings.x.pfk.line4.account = 1
hs_settings.x.pfk.line4.feature = keyline
hs_settings.x.pfk.line4.value = 4
For more information about these parameters, see “"hs_settings" Module: Handset
Settings” on page 133.
Repeater Mode
On the Repeater Mode page, you can enable a repeater (such as the M1 DECT
Repeater) to be registered to the base station.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
60
Setting Description
Enable Repeater Mode Select this check box to enable a repeater to be registered
to your M100 SC 8-line base station. Changing this setting
requires a reboot of the M100 SC 8-line base station.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
61
Handset Name
On the
Handset Name
page, you can enter a name for each Handset. The Handset Name
will be used throughout the WebUI and will appear on the handset Idle screen.
The Handset Name is limited to a maximum of 11 characters.
The default name is "HANDSET". Blank name fields are not allowed. If you click
when any fields are empty, an error message appears.
Programmable Hard Keys
You can assign additional functions to the Line keys, Hard keys, and Soft keys that are
listed on the Programmable Hard Keys page. The functions that you assign to these keys
apply to each key in idle mode only.
The programmable hard key settings are also available as parameters in the configuration
file. See the parameters named hs_settings.x.pfk. in “"hs_settings" Module: Handset
Settings” on page 133.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
62
In the Select Handset setting, select the handset whose keys you want to assign functions.
The following table lists the available selections for Type.
Setting Description
N/A Configures the key so it does not have a function.
If you press the key while the handset is idle, nothing will
happen.
KeyLine* Configures the Line Key (L1-L4) for Key System
Emulation. The phone user can manage his/her own held
calls and shared calls within the system. The key LED will
change according to call activity.
In the Value setting, set the KeyLine number. For example,
1 for Line Key 1, 2 for Line Key 2, etc. For more information
about KeyLine numbers, see “KeyLine Assignments” on
page 57.
Line* Configures the key for accessing a line. The phone user
can make calls or answer calls by pressing these keys.
The key LED will change according to call activity.
In the Account setting, select the desired account number.
Shared Calls Configures the key to access the Call List.
Directory Configures the key to access the Directory menu.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
63
Setting Description
Call History Configures the key to access the Call History list.
Redial Configures the key to access the Redial list.
Messages Configures the key to access the Message menu.
In the Account setting, select the desired account number.
Do Not Disturb Configures the key to turn Do Not Disturb on or off.
In the Account setting, select the desired account number.
Call Forward Busy Configures the key to turn Call Forward Busy on or off.
In the Account setting, select the desired account number
for which Call Forward Busy will apply. Make sure to also
configure Call Forward settings on the Call Settings page.
Call Forward All Configures the key to turn Call Forward All on or off.
In the Account setting, select the desired account number
for which Call Forward All will apply. Make sure to also
configure Call Forward settings on the Call Settings page.
Call Forward No Answer Configures the key to turn Call Forward No Answer on or
off. In the Account setting, select the desired account
number for which Call Forward No Answer will apply.
Make sure to also configure Call Forward settings on the
Call Settings page.
*This Type is only available for Line Key Settings (L1 to L4).
Server Application
On the Server Application page, you can enter Action URIs to allow the M100 SC to
interact with a server application by using an HTTP GET request. The action URI triggers
a GET request when a specified event occurs. Action URIs allow an external application to
take control of the display when an event occurs. These pre-defined events are listed under
“Action URI” on the Server Application page.
Action URIs are typically used in conjunction with the XML Browser, which can be
customised to deliver an appropriate user experience.
The M100 SC supports both push and pull server applications. Note that Action URI
events are not “push” events as it is the phone that requests a URI when triggered by
certain states. You can enable push server applications under “XML Push Settings”.
Action URI Syntax
To access an XML application, the phone performs an HTTP GET on a URL.
An HTTP GET request may contain a variable name and variable value, which are
separated by "=". Each variable value starts and ends with "$$" in the query part of the URL.
Action URI variables pass dynamic data to the server. The valid URL format is:
http://host[:port]/dir/file name?variable name=$$variable value$$
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
64
where:
host is the hostname or IP address of the server supporting the XML application
port is the port number the phones are using for the HTTP request
At the time of the HTTP call, the variable value field is populated with the appropriate data.
For example, the following URL passes the SIP Account User Identifier to the server:
http://10.50.10.140/script.pl?name=$$SIPUSERNAME$$
A GET request then passes along the following information:
http://10.50.10.140/script.pl?name=42512
Assuming that the User Identifier is 42512.
Variable names are defined by the particular XML application being called.
Variable values are predefined and depend on the status of the phone. If the variable has
no meaning in the current status, then the phone sends an empty string.
The table below lists all possible variable values. Note that variables applicable during an
Incoming or Active Call (such as INCOMINGNAME and REMOTENUMBER) are initialised
at the beginning and at the end of the call.
Variable value Description
SIPUSERNAME SIP Account User Identifier
DISPLAYNAME SIP Account Display Name
LOCALIP Phone's local IP Address
INCOMINGNAME Caller ID name of the current Incoming Call
REMOTENUMBER Remote party phone number (Incoming or Outgoing)
REGISTRATIONSTATE Registration state available from the Registration event.
Values are:
REGISTERED
DEREGISTERED
FAIL
MAC The phone's MAC Address
MODEL The phone's model number: M100 SC.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
65
Action URI
Setting Description
End of boot sequence The End of boot sequence URI is triggered at the end of
the phone boot sequence.
Using the End of boot sequence URI, it is possible to
develop self-provisioning on the phone. For example, an
XML application can identify the phone and generate a
MAC-specific file on the fly.
Successful Registration The Successful Registration URI is triggered the first time
the phone registers successfully to a SIP Account. If the
phone registers to multiple SIP Accounts, then the
Successful Registration URI is triggered for each line.
On Hook The On Hook URI is triggered when the phone transitions
from Active to Idle (or from Paging to Idle). For example,
when:
The user presses the End soft keybutton
The user hangs up the handset during a call
A transfer is completed and the user returns to idle
The far end hangs up
The call was not answered
The call fails.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
66
Setting Description
Off Hook The Off Hook URI is triggered when the user goes to Dial
mode by:
Lifting the handset
Pressing the SPEAKER hard key
Pressing the [New] soft key during a held call.
Note that the Off Hook URI will NOT be triggered when
calling a pre-defined number and going immediately to
Dialling modethis event triggers the Outgoing Call URI
instead.
Incoming Call
The Incoming Call URI is triggered for each Incoming Ring
event or Call Waiting event. Using the Incoming Call URI, it is
possible to display extra information on the phone for an
Incoming Call. For example, the XML application that is
called when there is an Incoming Call can do a database
lookup and display information on the caller.
Note that this Action URI will not be triggered if DND or Call
Forward All is enabled or if Call Waiting is disabled (i.e., the
call is rejected).
Outgoing Call
The Outgoing Call URI is triggered each time a SIP INVITE
message is sent (Dialling mode). For example, after:
Pressing the Dial key in Pre-Dial with
populated number
Using the dial pad to speed dial a call
Dialling a Directory number by going off-hook.
Timer Based
The Timer Based URI will be triggered when the configured
timeout expires. The timer starts at the end of the phone boot
sequence.
Timer Based Interval
Enter the interval before the Timer Based URI is triggered.
Connected
The Connected URI is triggered each time the phone is in an
Active Call or is Paging.
Registration Event
The Registration Event URI is triggered every time there is a
registration state change. For example:
Registered
Deregistered
Fail (Registration timed out, refused, or expired)
The Registration Event URI is not triggered when the same
event is repeated.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
67
XML Push Settings
Setting Description
Enable HTTP Push Select to enable HTTP push, which enables the phone to
display XML objects that are “pushed” to the phone from
the server via http/https POST or SIP NOTIFY.
Enable Push during call Select to enable the phone to display pushed XML objects
during a call. Otherwise, the XML application is displayed
after the call is over.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
68
Network Pages
You can set up the M100 SC for your network configuration on the Network pages. Your
service provider may require you to configure your network to be compatible with its
service, and the M100 SC settings must match the network settings.
The network settings are grouped into Basic and Advanced Settings. IPv4 and IPv6
protocols are supported.
When both IPv4 and IPv6 are enabled and available, the following guidelines apply when
determining which stack to use:
For outgoing traffic, the IP address (or resolved IP) in the server fieldeither IPv4
or IPv6will determine which stack to be used.
In general, most operations can be associated with one of the servers listed on the
“Basic Network Settings” page. However, for operations triggered by/dependent
upon network status, the phone must determine which server to use. For example,
a special case like the "Network down" LED indication on the base station can be
ambiguous for server association. Because its primary purpose is to aid in
troubleshooting SIP registration issues, this case will be associated with the SIP
registration server.
DNS entries with both IPv4 and IPv6 settings can be used to resolve FQDN entries.
There are no preferences with the order of the DNS queries.
Pcap should include traffic for both stacks.
Dual stack operations should be transparent to PC port traffic.
PnP is not supported on IPv6.
VPN is not supported in IPv6 or PPPoE.
The network settings are also available as parameters in the configuration file. See
“"network" Module: Network Settings” on page 140.
After entering information on this page, click to save it.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
69
Basic Network Settings
Basic Network Settings
Click the link for each setting to see the matching configuration file parameter in “"network"
Module: Network Settings” on page 140. Default values and ranges are listed there.
IPv4
Setting Description
Disable Disables all related IPv4 settings.
DHCP DHCP is selected (enabled) by default, which means the
M100 SC will get its IP address, Subnet Mask, Gateway,
and DNS Server(s) from the network. When DHCP is
disabled, you must enter a static IP address for the M100
SC, as well as addresses for the Subnet Mask, Gateway,
and DNS Server(s).
You must be familiar with TCP/IP principles and protocols to configure static IP
settings.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
70
Setting Description
Static IP When Static IP is selected, you must enter a static IP
address for the M100 SC, as well as addresses for the
Subnet Mask, Gateway, and DNS Server(s).
IP Address If DHCP is disabled, enter a static IP address for the M100
SC.
Subnet Mask Enter the subnet mask.
Gateway Enter the address of the default gateway (in this case, your
router).
PPPoE Select to enable PPPoE (Point-to-Point Protocol over
Ethernet) mode.
Username Enter your PPPoE account username.
Password Enter your PPPoE account password.
Manually Configure DNS
Select to enable manual DNS configuration.
Primary DNS If DHCP is disabled, enter addresses for the primary and
secondary DNS servers.
Secondary DNS
IPv6
Setting Description
Disable Disables all related IPv6 settings.
Auto Configuration Auto configuration is selected (enabled) by default, which
means the M100 SC will get its IP address, Gateway, and
DNS Server(s) from the network. When Auto Configuration is
disabled, you must enter a static IP address for the M100
SC, as well as addresses for the Gateway and DNS
Server(s).
Static IP When Static IP is selected, you must enter a static IP
address for the M100 SC, as well as an IPv6 address
prefix, Gateway, and DNS Server(s).
IP Address If Auto Configuration is disabled, enter a static IP address for
the M100 SC.
Prefix (0128) Enter the IPv6 address prefix length (0 to 128 bits).
Gateway Enter the address of the default gateway (in this case, your
router).
Manually Configure DNS
Select to enable manual DNS configuration.
Primary DNS If Auto Configuration is disabled, enter addresses for the
primary and secondary DNS servers.
Secondary DNS
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
71
Advanced Network Settings
VLAN
You can organize your network and optimize VoIP performance by creating a virtual LAN
for phones and related devices.
Click the link for each setting to see the matching configuration file parameter in “"network"
Module: Network Settings” on page 140. Default values and ranges are listed there.
Setting Description
Enable LAN Port VLAN Enable if the phone is part of a VLAN on your network.
Select to enable.
VID Enter the VLAN ID (vlan 5, for example).
Priority Select the VLAN priority that matches the Quality of
Service (QOS) settings that you have set for that VLAN ID.
Outbound SIP packets will be marked and sent according
to their priority. 7 is the highest priority.
Note: Configuring QOS settings for your router or switch is
a subject outside the scope of this document.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
72
LLDP-MED
Setting Description
Enable LLDP-MED Enables or disables Link Layer Discovery Protocol for
Media Endpoint Devices (LLDP-MED). LLDP-MED is a
standards-based discovery protocol supported on some
network switches. It is required for auto-configuration with
VLAN settings.
Packet Interval (secs) Sets the LLDP-MED packet interval (in seconds).
802.1x
Setting Description
Enable 802.1x Enables or disables the 802.1x authentication protocol.
This protocol allows the phone to attach itself to network
equipment that requires device authentication via 802.1x.
Identity Enter the 802.1x EAPOL identity.
MD5 Password Enter the 802.1x EAPOL MD5 password.
EAP type
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
73
VPN
You can operate the M100 SC SIP DECT 8-line Base Station over a Virtual Private
Network (VPN). VPN enables remote users and remote sites to connect to a main
corporate network and SIP server with a high level of performance and security.
Configuring VPN using the WebUI consists of enabling VPN and uploading a VPN
configuration file. The VPN configuration file (openvpn_client.tar) must contain the
following files:
client.conf
a keys folder containing
ca.crt
client.crt
client.key
The filename of the VPN client configuration file and certificates must match the names
https://service.snom.com.
Ensure that NTP or manual time is configured correctly so that the M100 SC is
using the correct date and time before VPN setup. Mismatched time between sites
and servers may invalidate the initial TLS handshake.
Setting Description
VPN Enable Enables or disables the phone to connect using the
OpenVPN client.
If VPN is enabled, but not connected, all SIP traffic will
continue to route via the LAN IP.
If VPN is enabled and connected, all SIP traffic will route
via the VPN tunnel. The exception is the web server, which
will still be accessible via the LAN IP.
VPN Config (file upload) Browse to and upload the VPN configuration file
openvpn_client.tar.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
74
Contacts Pages
Base Directory
On the Base Directory page, you can manage directory entries that will be available on all
handsets. You can sort, edit, delete, and add contact information for up to 1000 entries.
In order to back up your contacts or import another local directory file, the page also
enables you to export and import the base directory.
The BaseDirectory lists entries on up to 50 pages, with 20 entries per page. Click
,
,
, or a page number to view the desired page of entries.
Each handset also has its own directory. You can add entries to the handset
directory using the handset. For more information, see the M100 SC/M10 SC
User Guide.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
75
Table 5 describes the buttons available on the BaseDirectory page.
Table 5. BaseDirectory commands
Click To...
Sort the list by last name.
Edit information for an entry
View the next page of entries.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
76
Table 5. BaseDirectory commands
Click To...
View the last page of entries.
View the first page of entries.
Delete selected entries from the directory. Click Select All to
select every entry on the page you are viewing.
Add a new directory entry.
Delete all Directory entries.
Import a directory file.
Export the directory.
To add a new directory entry:
1.
Click
.
The Create Base Directory Entry page appears.
2.
Enter the required information as described in the following table.
Create Base Directory Entry
Setting Description Range Default
First Name Enter the appropriate names in
these fields. The maximum length
of the first name and last name
fields is 15 characters.
n/a Blank
Last Name
Ringer Tone Sets a unique ringer tone for calls
from this directory entry.
Auto, Tone 1–10 Tone 1
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
77
Setting Description Range Default
Account Sets the account used when you
dial this directory entry.
Default Account,
Account 1–8
Default
Account
Work Number
Enter the appropriate names and
numbers in these fields.
n/a
Blank
Mobile Number
Other Number
Directory Import/Export
The best way to create a directory file for import is to first export the directory from the
phone. After exporting the file, open it in an .xml editor and add or modify entries.
Importing a directory file adds the imported directory entries to existing entries. Therefore,
it is possible to have duplicate entries after importing a directory file. If you are importing a
"complete" directory file with the aim of replacing the entire current directory, use Select All
and to clear the directory before importing the file.
Using the configuration file, you can set whether an imported directory file adds to
existing entries or replaces existing entries. See “"file" Module: Imported File
Settings” on page 168.
Directory files are .xml files that have the following tags:
Local Directory WebUI field Directory file XML tag
First Name <DIR_ENTRY_NAME_FIRST>
Last Name <DIR_ENTRY_NAME_LAST>
Work Number <DIR_ENTRY_NUMBER_WORK>
Mobile Number <DIR_ENTRY_NUMBER_MOBILE>
Other Number <DIR_ENTRY_NUMBER_OTHER>
Account <DIR_ENTRY_LINE_NUMBER>
Call Block (not on WebUI) <DIR_ENTRY_BLOCK>
Ringer Tone <DIR_ENTRY_RINGER>
Blacklist
On the Blacklist page, you can manage local blacklist entries. The M100 SC rejects calls
from numbers that match blacklist entries. You can sort, edit, delete, and add up to 200
blacklist entries. In order to back up your blacklist entries or import another local blacklist
file, the page also enables you to export and import the blacklist.
The blacklist lists entries on up to 10 pages, with 20 entries per page. Click ,
, , or a page number to view the desired page of entries.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
78
Table 6 describes the buttons available on the Blacklist page.
Table 6. Blacklist commands
Click To...
Sort the list by last name.
Edit information for an entry
View the next page of entries.
View the last page of entries.
View the first page of entries.
Delete selected entries. Click Select All to select every entry on
the page you are viewing.
Add a new entry.
Delete all entries.
You can also use the M10 SC menu to manage blacklist entries. For more
information, see the M100 SC/M10 SC User Guide.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
79
Table 6. Blacklist commands
Click To...
Import a blacklist file.
Export the blacklist.
To add a new blacklist entry:
1.
Click
.
The Create Blacklist Entry page appears.
2.
Enter the required information as described in the following table.
Create Blacklist Entry
Setting Description Range Default
First Name Enter the appropriate names in
these fields. The maximum length
of the first name and last name
fields is 15 characters.
n/a
Blank
Last Name
Account Sets the account used when you
dial this directory entry.
Default Account,
Account 1–8
Account 1
Work Number
Enter the appropriate names and
numbers in these fields.
n/a
Blank
Mobile Number
Other Number
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
80
Blacklist Import/Export
The best way to create a blacklist file for import is to first export the blacklist from the M100
SC. After exporting the file, open it in an .xml editor and add or modify entries.
Importing a blacklist file adds the imported blacklist entries to existing entries. Therefore, it
is possible to have duplicate entries after importing a blacklist file. If you are importing a
"complete" blacklist file with the aim of replacing the entire current blacklist, use Select All
and to clear the blacklist before importing the file.
Using the configuration file, you can set whether an imported blacklist file adds to
or replaces existing entries. See “"file" Module: Imported File Settings” on
page 168.
Blacklist files are .xml files that have the following tags:
Blacklist WebUI field Blacklist file XML tag
First Name <BLACKLIST_ENTRY_NAME_FIRST>
Last Name <BLACKLIST_ENTRY_NAME_LAST>
Work Number <BLACKLIST_ENTRY_NUMBER_WORK>
Mobile Number <BLACKLIST_ENTRY_NUMBER_MOBILE>
Other Number <BLACKLIST_ENTRY_NUMBER_OTHER>
Account <BLACKLIST_ENTRY_LINE_NUMBER>
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
81
LDAP
The phone supports remote Lightweight Directory Access Protocol (LDAP) directories. An
LDAP directory is hosted on a remote server and may be the central directory for a large
organization spread across several cities, offices, and departments. You can configure the
phone to access the directory and allow users to search the directory for names and
telephone numbers.
The LDAP settings are also available as parameters in the configuration file.
See “"remoteDir" Module: Remote Directory Settings” on page 155.
After entering information on this page, click to save it.
LDAP Settings
Click the link for each setting to see the matching configuration file parameter in
“"remoteDir" Module: Remote Directory Settings” on page 155. Default values and ranges
are listed there.
Setting Description
Enable LDAP Enables or disables the phone's access to the LDAP
directory.
Directory name Enter the LDAP directory name.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
82
Setting Description
Server address Enter the LDAP server domain name or IP address.
Port Enter the LDAP server port.
Version Select the LDAP protocol version supported on the phone.
Ensure the protocol value matches the version assigned
on the LDAP server.
Authentication scheme Select the LDAP server authentication scheme.
Authentication name Enter the user name or authentication name for LDAP
server access.
Authentication password Enter the authentication password for LDAP server access.
Base Enter the LDAP search base. This sets where the search
begins in the directory tree structure. Enter one of more
attribute definitions, separated by commas (no spaces).
Your directory may include attributes like "cn" (common
name) or "ou" (organizational unit) or "dc" (domain
component).
For example: ou=accounting,dc=snom,dc=com
Maximum number of
entries
Sets the maximum number of entries returned for an LDAP
search. Limiting the number of hits can conserve network
bandwidth.
Maximum search delay Enter the delay (in seconds) before the phone starts
returning search results.
First name filter Enter the first name attributes for LDAP searching. The
format of the search filter is compliant to the standard string
representations of LDAP search filters (RFC 2254).
Last name filter Enter the last name attributes for LDAP searching. The
format of the search filter is compliant to the standard string
representations of LDAP search filters (RFC 2254).
Phone number filter Enter the number attributes for LDAP searching. The
format of the search filter is compliant to the standard string
representations of LDAP search filters (RFC 2254).
First name attribute Sets the attribute for first name. What you enter here
should match the first name attribute for entries on the
LDAP server (gn for givenName, for example). This helps
ensure that the phone displays LDAP entries in the same
format as the Local Directory.
Last name attribute Sets the attribute for last name. What you enter here
should match the last name attribute for entries on the
LDAP server (sn for surname, for example). This helps
ensure that the phone displays LDAP entries in the same
format as the Local Directory.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
83
Setting Description
Work number attribute Sets the attribute for the work number. What you enter here
should match the work number attribute for entries on the
LDAP server (telephoneNumber, for example). This helps
ensure that the phone displays LDAP entries in the same
format as the Local Directory.
Mobile number attribute Sets the attribute for the mobile number. What you enter
here should match the mobile number attribute for entries
on the LDAP server (mobile, for example). This helps
ensure that the phone displays LDAP entries in the same
format as the Local Directory.
Other number attribute Sets the attribute for the other number. What you enter
here should match the other number attribute for entries on
the LDAP server (otherPhone, for example). This helps
ensure that the phone displays LDAP entries in the same
format as the Local Directory.
Lookup for incoming
calls
Enables or disables LDAP incoming call lookup. If enabled,
the phone searches the LDAP directory for the incoming
call number. If the number is found, the phone uses the
LDAP entry for CID info.
Lookup in dialing mode Enables or disables LDAP outgoing call lookup. If enabled,
numbers entered in pre-dial or live dial are matched
against LDAP entries. If a match is found, the LDAP entry
is displayed for dialing.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
84
BLANK PAGE
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
85
BLANK PAGE
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
86
Servicing Pages
Reboot
To manually reboot the M100 SC and apply settings that you have updated, click
.
Time and Date
On the Time and Date page, you can manually set the time and date, and the time and date
formats. You can also set the system time to follow a Network Time Protocol (NTP) Server
(recommended) or you can set the time and date manually.
The time and date settings are also available as parameters in the configuration file.
See “"time_date" Module: Time and Date Settings” on page 150.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
87
Time and Date Format
Click the link for each setting to see the matching configuration file parameter in
“"time_date" Module: Time and Date Settings” on page 150. Default values and ranges are
listed there.
Setting Description
Date Format Sets the date format.
Time Format Sets the clock to a 24-hour or 12-hour format.
Network Time Settings
Setting Description
Enable Network Time Enables or disables getting time and date information for
your phone from the Internet.
NTP Server If Enable Network Time is selected, enter the URL of your
preferred time server.
Use DHCP (Option 42) If Enable Network Time is selected, select to use DHCP to
locate the time server. Option 42 specifies the NTP server
available to the phone. When enabled, the phone obtains
the time in the following priority:
1.
Option 42
2.
NTP Server
3.
Manual time.
Time Zone and Daylight Savings Settings
Setting Description
Time Zone Select your time zone from the list.
Automatically adjust
clock for Daylight
Savings
Select to adjust the clock for daylight savings time
according to the NTP server and time zone setting. To
disable daylight savings adjustment, disable both this
setting and User-defined Daylight Savings Time.
User-defined Daylight
Savings Time
Select to set your own start and end dates and offset for
Daylight Savings Time. To disable daylight savings
adjustment, disable both this setting and Automatically
adjust clock for Daylight Savings.
Daylight Savings Start:
If User-defined DST is enabled, set the start date and time
Month
for daylight savings: Month, week, day, and hour.
Week
Day
Hour
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
88
Setting Description
Daylight Savings End:
If User-defined DST is enabled, set the end date and time
Month
for daylight savings: Month, week, day, and hour.
Week
Day
Hour
Daylight Savings Offset
(minutes)
If User-defined DST is enabled, this specifies the daylight
savings adjustment (in minutes) to be applied when the
current time is between Daylight Savings Start and
Daylight Savings End.
Use DHCP
(Option 2/100/101)
If Enable Network Time is selected, select to use DHCP to
determine the time zone offset. Options 2, 100 and 101
determine time zone information.
Manual Time Settings
If Enable Network Time is disabled or if the time server is not available, use Manual Time
Settings to set the current time.
Setting Description
Date Select the current year, month, and day. Click the Date
field and select the date from the calendar that appears.
Time Sets the current hour, minute, and second. Click the Time
field, and enter the current time. You can also refresh the
page to update the manual time settings.
Click
to start the M100 SC using the manual time settings.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
89
Custom Language
On the Export Translation page, you can export WebUI language strings. After exporting
language strings, you can use the resulting file as the basis for a custom language
translation file (.tpk file).
You can import one custom language for use on the WebUI. The custom language adds to
the existing languages available with the firmware.
Importing a custom language can only be done using the configuration file. See “"file"
Module: Imported File Settings” on page 168.
The available languages for export are identical to the WebUI Language list described in
“User Preferences on page 55.
The filename of the exported language file will be:
WebUI: <Model Number>-<Display Name>-webui.tpk
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
90
Firmware Upgrade
You can update the M100 SC with new firmware using the following methods:
Retrieving a firmware update file from a remote host computer and accessed via a
URL. This central location may be arranged by you, an authorized dealer, or your
SIP service provider. Enter the URL under Firmware Server Settings.
Using a file located on your computer or local network. No connection to the Internet
is required. Consult your dealer for access to firmware update files. Click Manual
Upgrade to view the page where you can manually upgrade the M100 SC
firmware.
The firmware upgrade settings are also available as parameters in the configuration file.
See “"provisioning" Module: Provisioning Settings” on page 145.
Firmware Server Settings
Click the link for each setting to see the matching configuration file parameter in
“"provisioning" Module: Provisioning Settings” on page 145. Default values and ranges are
listed there.
Setting Description
Base Firmware URL The URL where the M100 SC Base Station firmware
update
file resides. This should be a full path, including the filename
of the firmware file.
Handset Firmware URL The URL where the M10 SC Cordless Handset firmware
update file resides. This should be a full path, including the
filename of the firmware file.
Installed Handset
Firmware
The version number of handset firmware currently
installed.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
91
Setting Description
Cordless Deskset
Firmware URL
The URL where the M18 SC Deskset Accessory firmware
update file resides. This should be a full path, including the
filename of the firmware file.
Installed Cordless
Deskset Firmware
The version number of deskset firmware currently installed.
Server authentication
name
Authentication username for the firmware server.
Server authentication
password
Authentication password for the firmware server.
To update the firmware immediately:
Click
,
, or .
You can also configure the M100 SC to check for firmware updates at regular
intervals. See “Provisioning” on page 95.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
92
Manual Firmware Update and Upload
On the Manual Firmware Update Settings page, you can upgrade the M100 SC, handset,
and cordless deskset firmware using a file located on your computer or local network.
To update the firmware using a file on your computer or local network:
1.
On the Manual Firmware Update page, click to locate and open the
firmware update file.
2.
Click
,
, or .
After clicking the M100 SC will update its firmware and restart.
If you are updating handset and/or deskset firmware, you must perform one more
procedure after clicking - see Updating a Cordless Handset/Deskset”,
below.
Updating a Cordless Handset/Deskset
Updating DECT cordless handset/deskset firmware using the WebUI is a two-step process.
First you must download the handset/deskset firmware and install it on the base station.
Second, you must install the handset/deskset firmware on the handset/deskset. The
handset/deskset downloads the firmware over the air from the base station.
To install the handset/deskset firmware on the basestation:
1.
To install the handset firmware: Click on the Firmware
Server update page, or on the Manual Firmware update page. The
confirmation dialog box shown below appears.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
93
2.
To install the deskset firmware: Click on the Firmware
Server update page, or on the Manual Firmware update page.
The confirmation dialog box shown below appears.
3.
To begin installing the handset/deskset firmware, click . The message
Installing handset firmware. Please wait... appears. To cancel the download,
click
.
After clicking , the message System update in progress. Please wait...
appears on the handset/deskset.
After a successful update, the message Firmware installation successful appears on
the WebUI.
An error message appears if:
the handset/deskset firmware is aleady up to date.
the handset/deskset firmware URL is incorrect, or the file cannot be retrieved for
any other reason.
the handset/deskset firmware file is corrupted.
the handset/deskset doesn‘t recognize the firmware file. For example, the firmware
file may belong to a different ErisTerminal product.
To install the firmware on the cordless handset/deskset:
Your cordless handset/deskset will automtically initiate the firmware update after a
short period of time, as long as there are no active calls on the base station. If you
wish to manually start the firmware update, perform the steps below.
1.
On the handset/deskset, press MENU, and then select Admin settings.
2.
Enter the admin password. The default is admin. To switch between entering upper or
lower-case letters, press the * key.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
94
3.
On the Admin settings menu, select Firmware update.
The handset/deskset checks for new firmware. If new firmware is found, the
handset/deskset screen asks you to proceed with the update.
Only one handset/deskset at a time can perform a firmware update. The base
LEDs flash to indicate the base is busy and all incoming calls are rejected while
the update is in progress.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
95
Provisioning
Provisioning refers to the process of acquiring and applying new settings for the M100 SC
using configuration files retrieved from a remote computer. After a M100 SC is deployed,
subsequent provisioning can update the M100 SC with new settings; for example, if your
service provider releases new features. See also “Provisioning Using Configuration Files”
on page 109.
With automatic provisioning, you enable the M100 SC to get its settings automatically
the process occurs in the background as part of routine system operation. Automatic
provisioning can apply to multiple devices simultaneously.
With manual provisioning on the WebUI, you update the M100 SC settings (configuration
and/or firmware) yourself via SERVICING > Provisioning > Import Configuration
and/or SERVICING > Firmware Upgrade > Manual Upgrade. Manual provisioning can
only be performed on one M100 SC at a time.
On the Provisioning page, you can enter settings that will enable the M100 SC to receive
automatic configuration and firmware updates. The Provisioning page also allows you to
manually update M100 SC configuration from a locally stored configuration file using an
Import function. You can also export the M100 SC configurationeither to back it up or
apply the configuration to another M100 SC in the futureto a file on your computer.
The provisioning process functions according to the Resynchronization settings and
Provisioning Server Settings. The M100 SC checks for the provisioning URL from the
following sources in the order listed below:
1.
PnPPlug and Play Subscribe and Notify protocol
2.
DHCP Options
3.
Preconfigured URLAny M100 SC updated to the latest firmware release will have the
Redirection Server URL available as the default Provisioning Server URL (see
provisioning.server_addresson page 149).
If one of these sources is disabled, not available, or has not been configured, the M100 SC
proceeds to the next source until reaching the end of the list.
The provisioning settings are also available as parameters in the configuration file. See
“"provisioning" Module: Provisioning Settings” on page 145.
Using the Redirection Service requires contacting the Snom support team for an
account.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
96
Provisioning Server
Setting Description
Server URL URL of the provisioning file(s). The format of the URL must
be RFC 1738 compliant, as follows:
"<schema>://<user>:<password>@
<host>:<port>/<url-path>"
"<user>:<password>@" may be empty.
"<port>" can be omitted if you do not need to specify the
port number.
Server authentication
name
User name for access to the provisioning server
Server authentication
password
Password for access to the provisioning server
Plug-and-Play Settings
Setting Description
Enable PnP Subscribe Select to enable the M100 SC to search for the
provisioning URL via a SUBSCRIBE message to a
multicast address (224.0.1.75). The M100 SC expects the
server to reply with a NOTIFY that includes the
provisioning URL. The process times out after five
attempts.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
97
DHCP Settings
Setting Description
Use DHCP Options Enables the M100 SC to use DHCP options to locate and
retrieve the configuration file. When selected, the M100
SC automatically attempts to get a provisioning server
address, and then the configuration file. If DHCP options
do not locate a configuration file, then the server
provisioning string is checked.
Note: Ensure that DHCP is also enabled on the “Basic
Network Settings” page.
DHCP Option Priority 1 If DHCP is enabled, sets the DHCP Option priority. Select
the highest priority option.
DHCP Option Priority 2 If DHCP is enabled, sets the DHCP Option priority. Select
the second highest priority option.
DHCP Option Priority 3 If DHCP is enabled, sets the DHCP Option priority. Select
the third highest priority option.
Vendor Class ID (DHCP
60)
DHCP Option 60 is available to send vendor-specific
information to the DHCP Server.
User Class Info (DHCP
77)
DHCP Option 77 is available to send vendor-specific
information to the DHCP Server.
Resynchronization
On the Resynchronization page, you can select how and when the phone checks for
updated firmware and/or configuration files.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
98
Setting Description
Mode Sets which files for which the M100 SC checks. It can
check
for configuration files, firmware update files (from the URL
entered on the Firmware Server Settings page), or both.
Note: When checking for both configuration and firmware
files, the firmware URL can be within the config file. This
firmware URL takes take precedence over the URL on the
Firmware Server Settings page. It will also update the URL
on the Firmware Server Settings page. This allows you to
change the firmware URL automatically.
Bootup Check Sets the M100 SC to check the provisioning URL for new
configuration and/or firmware files upon bootup. The
update is applied as part of the reboot process.
Schedule Check: Disable When selected, disables regularly scheduled file checking.
Schedule Check: Interval Sets an interval for checking for updates. After selecting
Interval, enter the interval in minutes between update
checks.
Schedule Check:
Days of the Week
Select to enable weekly checking for updates on one or
more days. After selecting Days of the Week, select the
day(s) on which the M100 SC checks for updates.
Start Hour Select the hour of the day on which the M100 SC checks
for updates.
End Hour Select the hour of the day on which the M100 SC stops
checking for updates.
Use encryption for
configuration file
Enables an AES-encrypted configuration file to be
decrypted before being applied to the M100 SC. Select if
the configuration file has been secured using AES
encryption. See “Securing configuration files with AES
encryption” on page 115.
Passphrase If the configuration file has been secured using AES
encryption, enter the 16-bit key. See “Securing
configuration files with AES encryption” on page 115.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
99
Import Configuration
You can configure the M100 SC by importing a configuration file from your computer or
your local network. For more information about configuration file types and configuration file
formatting, see “Provisioning Using Configuration Files” on page 109.
To import a configuration file:
1.
Click
to locate and open the configuration file.
2.
Click
.
The M100 SC will update its configuration.
Manually importing a configuration file differs from the auto-provisioning process in that:
The M100 SC does not check whether the file has been loaded before. The
configuration file is processed whether or not it is different from the current version.
The M100 SC will restart immediately after importing the configuration file, without
waiting for one minute of inactivity.
Export Configuration
You can export all the settings you have configured on the WebUI and save them as a
configuration file on your computer. You can then use this configuration file as a backup, or
use it to update other phones.
Under Export Configuration, you can also reset the phone to its default configuration.
The exported configuration file will contain the following passwords in plain text:
SIP account authentication password
EAPOL password
Firmware server password
Provisioning server password
Encryption passphrase
LDAP server password
Please ensure that you save the exported configuration file in a secure location.
You can also disable passwords from being exported as plain text. See
provisioning.pwd_export_enableon page 148.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
100
To export the configuration file:
Click
.
The format of the exported file is <model name>_<mac address>.htm. For example, M100
SC_0011A0OCF489.htm.
Exporting a configuration file generates two header lines in the configuration file. These
header lines provide the model number and software version in the following format:
#Model Number = xxxxxxx
#SW Version = xxxxxxx
You can use the exported file as a general configuration file, and duplicate the settings
across multiple units. However, ensure that you edit the file to remove any MAC-specific
SIP account settings before applying the general configuration file to other units.
Reset Configuration
You can reset the phone to its default settings.
To reset the M100 SC to its default configuration:
1.
Under Reset Configuration, click .
2.
When the confirmation box appears, click OK.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
101
Security
On the Security page you can reset the admin password, reset the user password, and
enter web server settings.
The security settings are also available as parameters in the configuration file. See “"web"
Module: Web Settings” on page 160.
Passwords
You can set the administrator password and user password on the WebUI or by using
provisioning. For more information on using provisioning to set passwords, see “"profile"
Module: Password Settings” on page 178.
To change the admin password:
1.
Enter the old password (for a new M100 SC, the default password is admin).
2.
Enter and re-enter a new password. The password is case sensitive and can consist of
both numbers and letters (to a maximum of 15 characters).
3.
Click
.
To change the User password:
1.
Enter the old password (for a new M100 SC, the default password is user).
2.
Enter and re-enter a new password. The password is case sensitive and can consist of
both numbers and letters (to a maximum of 15 characters).
3.
Click
.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
102
Web Server
Setting Description
HTTP Server port Port used by the HTTP server.
Enable Secure Browsing Sets the server to use the HTTPS protocol.
HTTPS Server port Port used by the HTTPS server.
To configure Web Server Settings:
1.
Enter the HTTP Server port number. The default setting is 80.
2.
Enable or Disable Secure Browsing. When enabled, the HTTPS protocol is used, and
you must select the HTTPS server port in the next step.
3.
Enter the HTTPS server port number. The default setting is 443.
Trusted Servers
The Trusted Servers setting provides a means of blocking unauthorised SIP traffic. When
enabled, each account's Registration server, SIP server, Outbound Proxy server and
Backup Outbound Proxy server will be used as sources for trusted SIP traffic. All unsolicited
SIP traffic (for example, INVITE, NOTIFY, unsolicited MWI, OPTIONS) will be blocked
unless it is from one of the trusted servers with the enabled accounts.
If additional trusted sources are required beyond what has been specified with the enabled
accounts (for example, if IP dialling or other types of server traffic need to be secured), use
the Trusted IP settings on the Security page.
Setting Description
Accept SIP account
servers only
Enable or disable using the account servers as sources for
trusted SIP traffic.
Changing the Web Server settings will reboot the M100 SC.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
103
Trusted IP
In addition to the Trusted Servers setting, incoming IP traffic can be filtered using an
"Allowed IP" list of IP addresses. When this means is enabled, all unsolicited IP traffic will
be blocked unless it is from one of the trusted IP addresses on the "Allowed IP" list.
You can enter the "Allowed IP" list in the 10 fields on the "Trusted IP" section. Entries on
the "Allowed IP" list must be specified as IP addresses (IPv4 or IPv6).
Three formats are supported for entries on the "Allowed IP" list:
1.
IP range specified using CIDR notation (defined in rfc4632). IPv4 or IPv6 address
followed by a prefix; for example, 192.168.0.1/24.
2.
IP range specified with a pair of starting and ending IPv4 or IPv6 addresses, separated
by '-' (for example, 192.168.0.1-192.168.5.6).
No space before or after '-'
Both starting IP & ending IP have to be with the same IP version
Starting IP has to be smaller than the ending IP; otherwise, all traffic will be
dropped.
3.
Single IP address in IPv4 or IPv6.
Setting Description
Accept only allowed IP
for incoming requests
Enable or disable using the “Allowed IP” list to filter all IP
traffic.
Allowed IP 1–10 Enter IP addresses or address ranges to be used as
sources of authorised IP traffic.
To ensure WebUI access after configuring Trusted IP, you must include the IP of
the Web Browser on the "Allowed IP" list.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
104
Certificates
You can add two types of certificates using the WebUI or the provisioning file (see “"file"
Module: Imported File Settings” on page 168). The two types of certificates are:
Device—A single Device Certificate can be uploaded so that other parties can
authenticate the phone in the following cases:
When the phone acts as a web server for the user to manage configurations.
When the phone acts as a client for applications where HTTP is supported.
TrustedTrusted Certificates are for server authentication with secured HTTP
transaction in the following applications: SIP signalling, Provisioning, Firmware,
and LDAP directory service. Up to 20 trusted certificates can be installed.
Device Certificate
To upload a Device certificate:
1.
On the Device Certificate page, click .
2.
Locate the certificate file and click Open.
3.
On the Device Certificate page, click .
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
105
Trusted Certificate
On the Trusted Certificate page, you can:
import up to 20 trusted certificates.
delete individual (or all) certificates.
protect certificates by selecting them in the Protected column, and then clicking
. Protected certificates cannot be selected for deletion and are
not removed during a reset to factory defaults.
Select Only accept trusted certificates to enable server authentication. Deselecting
this option disables server authentication.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
106
TR-069 Settings
The Broadband Forum’s Technical Report 069 (TR-069) defines a protocol for remote
management and secure auto-configuration of compatible devices. On the Tr069 page,
you can enable TR-069 and configure access to an auto-configuration server (ACS).
Setting Description
Enable TR069 Enable/Disable TR-069 subsystem.
ACS Username User name used for ACS authentication.
ACS Password Password used for ACS authentication.
ACS URL URL used to contact the ACS (for example,
http://my.acs:9675/path/to/somewhere/).
Enable Period Inform Enable/Disable periodic inform method calls.
Periodic Inform Interval
(seconds)
Periodic inform method calls interval.
Connection Request
Username
If the ACS wants to communicate with the device, it must
offer the matching Connection Request user name. When
the device sends the report to ACS for the first time, it
contains information for this.
Connection Request
Password
If the ACS wants to communicate with the device, it must
offer the matching Connection Request password. When
the device sends the report to ACS for the first time, it
contains information for this.
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
107
System Logs
On the Syslog Settings page, you can enter settings related to system logging activities.
It supports the following logging modes:
Syslog server
Volatile file
Under Network Trace, you can capture network traffic related to the phone's activity and
save the capture as a .pcap file. The file can be used for diagnostic and troubleshooting
purposes.
Under Download Log, you can save the system log to a file.
The Syslog settings are also available as parameters in the configuration file. See “"log"
Module: Log Settings on page 154.
Syslog Settings
Setting Description
Enable Syslog Enable log output to syslog server.
Server Address Syslog server IP address.
Port Syslog server port.
Log Level Sets the log level. The higher the level, the larger the
debug output.
5—ALL
4—DEBUG
3—INFO
2—WARNING
1—ERROR
0—CRITICAL
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
108
The logging levels are:
CRITICAL: Operating conditions to be reported or corrected immediately (for
example, an internal component failure or file system error).
ERROR: Non-urgent failuresunexpected conditions that won't cause the device
to malfunction.
WARNING: An indication that an error or critical condition can occur if action is not
taken.
INFO: Normal operational messages.
DEBUG: Developer messages for troubleshooting/debugging purposes.
Network Trace
To perform a network trace:
1.
Start a network trace by clicking . The button changes to .
2.
Stop the network trace by clicking .
3.
Save the trace by clicking . Your browser should prompt you to save the
capture.pcap file.
Download Log
To download the system log:
1.
Click
.
2.
After your browser prompts you to save the system.log file, save the file in the desired
location.
M100 SC Administrator and Provisioning Manual
Back to Contents
Provisioning Using Configuration Files
110
The Provisioning Process
The automatic provisioning process is as follows:
1.
Check for new or updated configuration files. For file-checking options, see
“Provisioning” on page 95 and “Resynchronization: configuration file checking” on
page 111. The M100 SC maintains a list of the last loaded provisioning files. The M100
SC compares its current configuration against the files it finds on the provisioning
server.
If provisioning has been triggered by the resync timer expiring or by remote
check-sync, the M100 SC checks for updated files after one minute of inactivity.
2.
Download the configuration files.
If any file on the provisioning server has changed, the M100 SC treats it as a new file
and downloads it.
If the provisioning URL specifies a path only with no filename, then by default the M100
SC looks for and retrieves the following two files:
General file: <model>.htm.
MAC-specific file: <model>_<MAC Address>.htm.
The <model> variable is the Snom product model: M100 SC, for example.
If the provisioning URL specifies both a path and filename, then the M100 SC retrieves
only the configuration file specified.
3.
The M100 SC restarts after one minute of inactivity.
During provisioning, the M100 SC reads the configuration file and validates each module
and setting. The M100 SC considers a setting valid if it is:
a valid data type
formatted as a valid setting
within a valid data range
part of a module that passes an integrity check. That is, the module's settings are
consistent and logical. For example, in the "network" module, if DHCP is disabled,
but no static IP address is specified, the module will fail the integrity check and
none of the settings will apply.
Invalid modules or invalid settings are skipped and logged as ERROR messages in the
system log, but will not interrupt the provisioning process. The system log will include the
module parameters that have not been applied. A recognized module with unrecognized
settings will cause all other settings in that module to be skipped.
A successful configuration or firmware update is reported as an INFO message in the
system log.
See “Configuration File Parameter Guide” on page 117 for the options and value ranges
available for each configuration file setting.
M100 SC Administrator and Provisioning Manual
Back to Contents
Provisioning Using Configuration Files
111
Resynchronization: configuration file checking
You can select a number of options that determine when the M100 SC checks for new
configuration files. This process of checking for configuration files is called
Resynchronization. Resynchronization options are available on the WebUI Provisioning
page, but you can also include them in a configuration file.
The resynchronization options are:
Modesets the M100 SC to check for a configuration file only, a firmware update
file only, or both types of file.
Neverconfiguration file checking is disabled
Bootupthe M100 SC checks for new configuration files when it boots up. Any
updates are applied during the boot-up process.
Remote check-syncenables you to start a resynchronization remotely using your
hosted server's web portal. The Remote check-sync settings are available only in
the configuration file, not the WebUI.
Repeatedly, at a defined interval from 60 to 65535 minutes (45 days).
M100 SC restart
If the M100 SC needs to restart after an auto-update, the restart happens only after the
device has been idle for one minute.
To prevent users from delaying the update process (auto-updates cannot begin until the
M100 SC has been idle for one minute), or to avoid device restarts that might interfere with
incoming calls:
set the resynchronization interval to a suitable period
upload any new configuration file(s) to your provisioning server after work hours so
that the M100 SC will download the file(s) when there is no call activity.
When you update the M100 SC by importing a configuration file using the WebUI, the
device restarts immediately after applying the new settings, regardless of whether the
M100 SC is idle.
M100 SC Administrator and Provisioning Manual
Back to Contents
Provisioning Using Configuration Files
112
Configuration File Types
The M100 SC is able to retrieve and download two types of configuration file. Depending
on your requirements, you may want to make both types of configuration file available on
your provisioning server.
The two configuration file types are a general configuration file and a MAC-specific
configuration file. The types differ in name only. The formatting of the files' content is the
same.
The general configuration file contains settings that are required by every M100 SC in the
system.
The MAC-specific configuration file is a file that only a single M100 SC can retrieve. The
MAC-specific configuration file name contains a M100 SC MAC address and can only be
retrieved by the device with a matching MAC address.
The filename formats for both files are:
General file: <model>.htm
MAC-specific file: <model>_<MAC Address>.htm
The <model> variable is the Snom product model; for example, M100 SC. For more
information about the MAC-specific configuration file, see “Guidelines for the MAC-Specific
configuration file” on page 114.
If the provisioning URL specifies a path only with no filename, then by default the M100 SC
will fetch both files.
However, if the provisioning URL specifies both a path and filename, then the M100 SC
will only fetch the single configuration file specified.
Both the general and MAC-specific files can contain any of the available configuration
settings. A setting can appear in the general configuration file or the MAC-specific
configuration file, or both files, or neither file. If a setting appears in both files, the setting
that is read last is the one that applies.
When the M100 SC fetches both a general and a MAC-specific configuration file, the
general file is processed first. You can configure a setting for most of your M100 SC 8-line
base stations in the general file, and then overwrite that setting for just a few M100 SC 8-
line base stations using the MAC-specific file.
M100 SC Administrator and Provisioning Manual
Back to Contents
Provisioning Using Configuration Files
113
Data Files
The configuration file can also include links to data files for product customization. Allowed
data types include the following:
Directory (contacts, blacklist) in .xml format
Certificates (server, provisioning) in pem format
Links to data files are in the configuration file's "file" module. This is where you enter any
URLs to the data files that the M100 SC 8-line base station may require.
None of the data files are exported when you export a configuration file from the M100 SC.
However, you can export a Directory or Blacklist .xml file using the WebUI. After modifying
the .xml file, you can use the configuration file "file" module to have the M100 SC import
the new file. For a complete list of data file parameters, see “"file" Module: Imported File
Settings” on page 168.
M100 SC Administrator and Provisioning Manual
Back to Contents
Provisioning Using Configuration Files
114
Configuration File Tips and Security
All configuration settings are initially stored in a configuration template file. Copy, rename,
and edit the template file to create a general configuration file and the MAC-specific
configuration files you will need. You can store the general configuration file and the
MAC-specific files on your provisioning server.
Do not modify the configuration file header line that includes the model and firmware
version.
To save yourself time and effort, consider which settings will be common to all (or the
majority of) M100 SC 8-line base stations. Such settings might include call settings,
language, and NAT settings. You can then edit those settings in the configuration template
and save it as the general configuration file. The remaining settings will make up the
MAC-specific configuration file, which you will have to copy and edit for each M100 SC.
Clearing parameters with %NULL in configuration file
For configuration file parameters that can have a text string value, you can clear the value
of the parameter by applying the value %NULL in the configuration file.
For example:
sip_account.1.display_name = %NULL
Guidelines for the MAC-Specific configuration file
The M100 SC downloads the MAC-specific configuration file after the general
configuration file. You must create a MAC-specific configuration file for each M100 SC in
your system. The file name must contain the M100 SC MAC address, which is printed on a
label on the bottom of the device. For example, a Snom M100 SC 8-line base station with
the MAC address of 00:11:A0:10:6F:2D would download the M100
SC_0011A0106F2D.htm file.
The MAC-specific configuration file contains settings intended exclusively for that M100
SC 8-line base station. Such settings will include SIP account settings such as display
name, user ID, and authentication ID.
case.
M100 SC Administrator and Provisioning Manual
Back to Contents
Provisioning Using Configuration Files
115
Securing configuration files with AES encryption
You can encrypt your configuration files to prevent unauthorized users modifying the
configuration files. The M100 SC firmware decrypts files using the AES 256 algorithm.
After encrypting a file and placing it on your provisioning server, you can enable the M100
SC to decrypt the file after fetching it from the server.
The procedures in this section use OpenSSL for Windows for file encryption, as shown in
Figure 2.
To decrypt a configuration file, you will need a 16-character AES key that you specified
when you encrypted the file. The key (or passphrase) is limited to 16 characters in length
and supports special characters ~ ^ ` % ! & - _ + = | . @ * : ; , ? ( ) [ ] { } < > / \ # as well as
spaces.
The encryption of configuration files is supported only for the auto provisioning
process. Encrypt files only if you intend to store them on a provisioning server. Do
not encrypt files that you intend to manually import to the M100 SC. You cannot
enable decryption for manually imported configuration files.
To encrypt a configuration file:
1.
(Optional) Place your configuration file in the same folder as the openssl executable
file. If the configuration file is not in the same folder as the openssl executable file, you
can enter a relative pathname for the [infile] in the next step.
2.
Double-click the openssl.exe file.
3.
On the openssl command line, type:
enc -aes-256-cbc -pass pass:[passphrase123456] -in [infile] -out [outfile]
-nosalt -p
Elements in brackets are examplesdo not enter the brackets. Enter a 16-character
passphrase and the unencrypted configuration file filename (the "infile") and a name for the
encrypted file ("outfile") that will result.
Figure 2. OpenSSL command line
M100 SC Administrator and Provisioning Manual
Back to Contents
Provisioning Using Configuration Files
116
To enable configuration file decryption:
1.
On the WebUI, click Servicing > Provisioning.
2.
On the Provisioning page under Resynchronization, select Use Encryption for
configuration file.
3.
Enter the 16-character passphrase that you created when you encrypted the
configuration file.
4.
Click
.
You must ensure that configuration files are encrypted when enabling AES
Encryption. Decrypting an unencrypted file will result in a garbage file that is not
processed. This will also be logged as an error in the system log.
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration File Parameter Guide
117
C H A P T E R 5
C
ONFIGURATION
F
ILE
P
ARAMETER
G
UIDE
This chapter lists the available options for all the settings within the M100 SC configuration
file. Most settings in the configuration file have an equivalent in the WebUI (see the settings
tables in “Using the WebUI” on page 35). However, the options you must enter when editing
the configuration file have a different syntax and format.
The settings are divided into modules. Most modules correspond to a page on the M100
SC WebUI. You may wish to reorganize the modules within the configuration file itself. The
configuration file settings can be listed in any order, and the configuration file will still be
valid.
The modules included in the configuration file are:
“"sip_account" Module: SIP Account Settings” on page 119
“"hs_settings" Module: Handset Settings” on page 133
“"network" Module: Network Settings” on page 140
““system” Module: System settings” on page 139
“"provisioning" Module: Provisioning Settings” on page 145
“"time_date" Module: Time and Date Settings” on page 150
“"log" Module: Log Settings” on page 154
“"remoteDir" Module: Remote Directory Settings” on page 155
“"web" Module: Web Settings” on page 160
““trusted_ip” Module: Trusted IP Settings on page 161
““trusted_servers” Module: Trusted Server Settings” on page 162
“"user_pref" Module: User Preference Settings” on page 163
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration File Parameter Guide
121
Setting: sip_account.x.primary_registration_server_port
Description: Sets the registration server port for account x.
Values: 1–65535 Default: 5060
Setting: sip_account.x.primary_registration_expires
Description: Sets the expiration time (in seconds) of the current registration for
account x.
Values: 30–7200 Default: 3600
Setting: sip_account.x.registration_retry_time
Description: Sets the retry frequency of the current registration for account x.
Values: 1–1800 Default: 10
Setting: sip_account.x.reliable_provisional_response_option
Description: Sets the 100rel/PRACK option. Indicates if the reliable provisional
responses are disabled, supported, or required.
1
(supported):
We will include "100rel" in "Supported" header.
This triggers the remote side (server or remote client) to include
"Requires:100rel" in their response (180 or 183). Server may
choose not to do so. But if it does, we need to respond with
PRACK.
We will NOT include a "Requires: 100rel" in our requests
(INVITE). i.e. we won't force anyone to use 100rel, but we will do
if we were asked to do.
2
(required):
Everything as described for supported, plus our outgoing INVITE
also includes "Requires: 100rel".
This forces the remote party must support 100rel.
Values: 0 (disabled), 1 (supported), Default: 0
2 (required)
Setting: sip_account.x.primary_outbound_proxy_server_address
Description: Sets the outbound proxy server IP address for account x.
Values: IPv4, IPv6 or FQDN Default: Blank
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration File Parameter Guide
124
Setting: sip_account.x.sip_dscp
Description: Sets the Signalling Quality of Service Layer 3 - DSCP for account x.
Values: 0–63 Default: 26
Setting: sip_account.x.local_sip_port
Description: Sets the Local SIP port for account x.
Values: 1–65535 Default: Account 1: 5060
Account 2: 5070
Account 3: 5080
Account 4: 5090
Account 5: 5100
Account 6: 5200
Account 7: 5300
Account 8: 5400
Setting: sip_account.x.transport_mode
Description: Sets the Signalling Transport Mode for account x.
Values: udp, tcp, tls Default: udp
Setting: sip_account.x.mwi_enable
Description: Enables or disables message waiting indicator subscription for account x.
Enable if SUBSCRIBE and NOTIFY methods are used for MWI.
Values: 0 (disabled), 1 (enabled) Default: 0
Setting: sip_account.x.mwi_subscription_expires
Description: Sets the MWI subscription expiry time (in seconds) for account x.
Values: 15–65535 Default: 3600
Setting: sip_account.x.mwi_ignore_unsolicited
Description: Enables or disables ignoring of unsolicited MWI notifications
notifications in addition to, or instead of, SUBSCRIBE and NOTIFY
methodsfor account x. Disable if MWI service is configured on the
voicemail server and does not involve a subscription to a voicemail
server.
Values: 0 (disabled), 1 (enabled) Default: 0
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration File Parameter Guide
131
Setting: sip_account.x.access_code_cfna_off
Description: Sets the Call Forward No Answer OFF feature access code for account x.
Values: Text string Default: Blank
Setting: sip_account.x.access_code_cfb_on
Description: Sets the Call Forward Busy ON feature access code for account x.
Values: Text string Default: Blank
Setting: sip_account.x.access_code_cfb_off
Description: Sets the Call Forward Busy OFF feature access code for account x.
Values: Text string Default: Blank
Setting: sip_account.x.access_code_anonymous_call_block_on
Description: Sets the Anonymous Call Block ON feature access code for account x.
Values: Text string Default: Blank
Setting: sip_account.x.access_code_anonymous_call_block_off
Description: Sets the Anonymous Call Block OFF feature access code for account x.
Values: Text string Default: Blank
Setting:
sip_account.x.access_code_outgoing_call_anonymous_on
Description: Sets the Anonymous Outgoing Call ON feature access code for account x.
Values: Text string Default: Blank
Setting:
sip_account.x.access_code_outgoing_call_anonymous_off
Description:
Sets the Anonymous Outgoing Call OFF feature access code for account x.
Values: Text string Default: Blank
M100 SC Administrator and Provisioning Manual
Back to Contents
Configuration File Parameter Guide
132
Setting: sip_account.x.mwi_uri
Description: Sets the MWI URI that will be used for MWI subscription. If this setting is
left blank, the M100 SC uses the account x user ID for MWI
subscription.
Values: SIP URI text string Default: Blank
Setting: sip_account.x.network_conference_enable
Description: Enables or disables network conferencing for account x.
Values: 0 (disabled), 1 (enabled) Default: 0
Setting: sip_account.x.network_bridge_uri
Description: Sets the URI for the network conferencing bridge on account x.
Values: Text string (SIP URI) Default: Blank
110

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Snom M100 SC wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info