Bedienungsanleitung Snom M200 SC Base Station (Seite 8 von 120) (Englisch)

809886

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

v1.01

M200SC Administrator and Provisioning Manual Introducing the M200SC

Network requirements

A switched network topology is recommended for your LAN. The oce LAN infrastructure should use Cat.-5/

Cat.-5e cable.

The M200SC requires a wired connection to the LAN. Wireless connections from your LAN to other devices (such

as laptops) in your oce will not impede performance.

A Dynamic Host Conﬁguration Protocol (DHCP) server is recommended and must be on the same subnet as the

M200SC base stations so that IP addresses can be auto-assigned. In most cases, your network router will have a

DHCP server. By default, the M200SC has DHCP enabled for automatic IP address assignment.

Note: Some DHCP servers have default settings that limit the number of network IP addresses

assigned to devices on the network. You should log in to your server to conﬁrm that the IP range

is sucient.

If no DHCP server is present, you can assign a static IP to the M200SC. You can assign a static IP address using

the handset handset menu. Go to Admin settings > Network setting > IPv4 or IPv6 > Set static IP. ` If you do not

have a DHCP server or do not manually assign static IPs, you will not be able to access the WebUI and/or enable

automatic time updates from an NTP server.

A DNS server is recommended to resolve the path to the Internet and to a server for ﬁrmware and conﬁguration

updates. If necessary, the system administrator can also download upgrade ﬁles and use the WebUI to update

the M200SC ﬁrmware and/or conﬁguration settings manually.

Figure 1. M200SC Installation Example

M200SC conﬁguration methods

You can conﬁgure the M200SC using one of the following methods:

◦ From the M15SC and M45SC handsets, using the handset menus. The handset menus are best suited

to conﬁguring a few settings, perhaps after the initial setup has been done. For administrators, the

settings available on the handset menus include network settings, account settings, and provisioning

settings. See "Using the admin settings menu" on page 12. Many of the settings accessible on the

handsets are most useful for end users. Through the menu, they can customize the screen appearance,

sounds, and manage calls. For more information, see the M215SC User Guide.

◦ The Web User Interface, or WebUI, which you access using your Internet browser. See "Conﬁguration

using the Web user interface (WebUI)" on page 17. The browser-based interface is easy to navigate

and best suited to conﬁguring a large number of M200SC settings at once. The WebUI gives you

access to every setting required for conﬁguring a single device. You can enter service provider account

settings on the WebUI, assign accounts to handsets, and set up provisioning, which will allow you to

automatically and remotely update the M200SC after initial conﬁguration.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snom M200 SC Base Station Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info