809888
52
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
52
v1.03
M215SC User Manual Base station web user interface (WUI)
System. In user mode, this page contains the call settings and the user preference for the accounts.
In admin mode, the general account settings for setting up and registering the SIP accounts and the
assignment of SIP accounts to individual handsets are also accessible.
Network. In user mode, this menu item is not visible in the top bar. In admin mode, this menu has two
pages, Basic and Advanced, where the network settings for IPv4 and IPv6, respectively, VLAN, VPN, etc. are
congured.
Contacts. This is a page where the base station's phone directory that is accessible to all registered
handsets and the blacklist (deny list) are located and maintained. This is also where LDAP is congured.
Servicing. In user mode, you can change the user password and enter a PIN for the phone lock on this
page. In admin mode, this menu item contains numerous submenus with the time and date, language, and
security settings, as well as the settings for rmware updates, provisioning, certicates, and TR069.
User settings
The settings available in user mode can also be congured on the handset assigned to the respective account.
System page
Call Settings.
General Call Settings Description
Anonymous Call Reject Select to block incoming calls without caller ID.
Enable Anonymous Call Select to make outgoing calls without your own caller ID information.
Do Not Disturb Setting Description
Enable DND Turning DND (do not disturb) on and o.
Call Forward Settings Description
Enable Call Forward Always Select to enable call forwarding for all calls on that account.
Enable Call Forward Busy Select to enable call forwarding for calls when you are on another call on that
account
Enable Call Forward No Answer Select to enable call forwarding for unanswered calls on that account.
Target Number Enter the number to which the calls will be forwarded.
User Preferences. Select a language for the WUI from the drop-down menu. The default language is
English.
Contacts page
Base Directory. This is the base station directory available to all handsets registered at the base station.
Fig. 1
52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Snom M200SC wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Snom M200SC

Snom M200SC Bedienungsanleitung - Deutsch - 75 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info