Bedienungsanleitung Snom M200SC (Seite 57 von 68) (Englisch)

809888

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

v1.03

M215SC User Manual Appendix 1 - Base Station Settings

Maximum Number of Calls Select the maximum number of concurrent active calls allowed for that account.

Feature Synchronization Enables the phone to synchronize with Broadworks Application Server. Changes to

features such as DND, Call Forward All, Call Forward No Answer, and Call Forward

Busy on the server side will also update the settings on the handset menu and WebUI.

Similarly, changes made using the handset or WebUI will update the settings on the

server.

DTMF method Select the default DTMF transmission method. You may need to adjust this if call

quality problems are triggering unwanted DTMF tones or you have problems sending

DTMF tones in general.

Unregister after reboot Enables the phone to unregister the account(s) after rebooting-before the account(s)

unregister unexpectedly in tandem with the rebooting phone, disable this setting.

SIP Server Settings Description

Server address Enter the IP address or domain name for the SIP server.

Server port Enter the port number that the SIP server will use.

Registration Settings Description

Server address Enter the IP address or domain name for the registrar server.

Server port Enter the port number that the registrar server will use.

Expiration Enter the desired registration expiry time in seconds.

Registration Freq (secs) Enter the desired registration retry frequency in seconds. If registration using the

Primary Outbound Proxy fails, the Registration Freq setting determines the number of

seconds before a registration attempt is made using the Backup Outbound Proxy.

Outbound Proxy Settings Description

Server address Enter the IP address or domain name for the proxy server.

Server port Enter the port number that the proxy server will use.

Backup Outbound Proxy Settings

Server address Enter the IP address or domain name for the backup proxy server.

Server port Enter the port number that the backup proxy server will use.

Audio Settings Description

Codec priority 1 Select the codec to be used rst during a call.

Codec priority 2 Select the codec to be used second during a call if the previous codec fails.

Codec priority 3 Select the codec to be used third during a call if the previous codec fails.

Codec priority 4 Select the codec to be used fourth during a call if the previous codec fails.

Codec priority 5 Select the codec to be used fth during a call if the previous codec fails.

Enable voice encryption (SRTP) Select to enable secure RTP for voice packets.

Enable G.729 Annex B When G.729a/b is enabled, select to enable G.729 Annex B, with voice activity

detection (VAD) and bandwidth-conserving silence suppression.

Preferred Packetization Time (ms) Select the packetization interval time.

Quality of Service Settings Description

DSCP (voice) Enter the Dierentiated Services Code Point (DSCP) value from the Quality of Service

setting on your router or switch.

DSCP (signalling) Enter the Dierentiated Services Code Point (DSCP) value from the Quality of Service

setting on your router or switch.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snom M200SC Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Snom M200SC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info