621561
59
Zoom out
Zoom in
Vorherige Seite
1/84
Nächste Seite
59
v1.06
Admin and Installation Guide M700, M300 Description of Settings
Handset settings are on-screen:
Setting Description
Idx Index of handsets. Handsets are numbered consecutively by the base station.
With checkbox for registering handsets at and deregistering or deleting them
from the base station.
IPEI International Portable Equipment Identier for DECT handsets which is unique
worldwide. It consists of the equipment manufacturer code (EMC) and a
portable serial number (PSN) issued by the manufacturer.
Handset State Present, detached, located, removed, enabled,.
Present@RPNxx: The handset is located at the base station with RPNxx (radio
xed part number).
Detached: The handset is turned o.
Located: The handset is congured to locate on a specic base station, but is
unable to do so (e.g., the base station is turned o).
Removed: The handset has not been used for a specied amount of time.
Enabled: Registration has been set up for handset, but handset has not
registered yet.
Handset Type FW Info Type of handset (e.g., M65) and rmware version (e.g., 324.7) on the handset
FWU Progress During a rmware update, this eld displays the update's progress.
O: No update in progress
Initializing: Update is starting
x%: Update in progress, x percent done
Verifying x%: Update writing completed, FW verication ongoing
Waiting for charger: Firmware has been transmitted to handset; update will
begin when handset is placed in charger.
Conn. term.wait: Firmware has been transmitted to repeater; update will begin
when system is idle.
Complete: Firmware on handset/repeater has been updated
Error: Unable to update (le not found, le invalid etc.)
Extension The extension number shown on the handset's display
Handset settings
When you click on Add Handset, the Handset page opens; the text eld for the IPEI contains the place
holders FFFF. When you click on the IPEI of a handset, the Handset page for editing that handset's
settings opens; the text eld for the IPEI contains the IPEI's 10-digit string of numerals and capital
letters.
Setting Description
IPEI International Portable Equipment Identier for DECT handsets which is unique
worldwide. It consists of the equipment manufacturer code (EMC) and a
portable serial number (PSN) issued by the manufacturer.
AC This is the access code for registering the handset at the base station. The
default is 0000 (four times zero). NOTE: This access code is not to be
confused with either the PIN for resetting the handset to factory values or
for deregistering it from the base station (default also 0000) or the PIN for
accessing the mailbox.
Alarm Line As required by PBX or VoIP provider
Alarm Number As required by PBX or VoIP provider
59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Snom M300 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Snom M300

Snom M300 Bedienungsanleitung - Deutsch - 82 seiten

Snom M300 Bedienungsanleitung - Englisch - 44 seiten

Snom M300 Bedienungsanleitung - Englisch - 38 seiten

Snom M300 Bedienungsanleitung - Englisch - 58 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info