Bedienungsanleitung Snooper Evolution Plus (Seite 16 von 31) (Englisch)

619681

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

6. Mute Button

If during an alert you decide that you would like to mute the audible alert, but

still retain a visual alert simply press the MUTE/CANCEL button briefly. The

screen will continue to display a visual alert but no sound will be emitted.

After you have travelled out of range of the location the unit will automatically

reset so the next time you encounter a location you will receive both an

audible and a visual alert as normal.

7. Alert Pattern

Fixed Speed Safety Cameras

As you approach a fixed speed safety camera the unit will begin to emit a

voice alert or your chosen audible alert (either a Soft or Hard ‘beep’) at your

preset alert distance. As you move closer to the fixed speed safety camera

the ‘beeping’ will quicken. At the same time the display will indicate the type

of location you are approaching, then the speed limit at that location and will

then begin to count down the distance in 50 metre increments to that location.

Automute

When your device alerts you to a location, rather than continually beeping

through the alert, it simply beeps at your selected volume for five seconds

and then automatically mutes the sound to volume level 3 until you are out of

range of the source. This allows you to receive a brief audible alert instead of

a continuous one.

If you would like to change the alert to a visual alert only press the

MUTE/CANCEL button to temporarily turn off the sound. If at any time you

would like to cancel the alert, simply press and hold the MUTE/CANCEL

button for approximately two seconds.

SPECs Safety Camera Systems

Due to the fact that the SPECs system incorporates a series of cameras that

monitor a vehicles speed over a fixed distance, a different alert pattern has

been devised to ensure that your concentration is maintained throughout the

danger zone.

When approaching the first camera in the SPECs system your Snooper

Evolution will begin to alert you at your chosen preset alert distance with the

display indicating ‘SPECs Str’ and emitting either a voice or your chosen

audible alert. The display will then change to indicate the speed limit at this

point and then count down the remaining distance in 50 metre increments to

the location of the camera.

Once you have passed the first camera the unit will then emit an audible alert

and will alternate the display showing ‘SPECs’ and the speed limit every five

seconds to remind you that you are still within the SPECs system.

Whilst travelling within a SPECs series, your Snooper Evolution will provide

both an audible and visual alert 250m before each camera. If after twenty

seconds you do not pass another camera, the alert will automatically ‘Time

Operating Instructions

Return to contents

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper Evolution Plus Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info