Bedienungsanleitung Snooper Evolution Plus (Seite 22 von 31) (Englisch)

619681

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

7. MEM Edit

It is possible to add and edit your own personal locations on your Snooper

Evolution. To add a new location make sure you are stationary and parked in

a safe, legal manner then press and hold the ‘New Location’ button (button 3)

for approximately two seconds.

To view your saved coordinates use either the MODE/MENU button (button

1) or the MUTE/CANCEL button (button2) to scroll up or down through the

options until ‘Sel clr’ is displayed, then press the SELECT button. You can

scroll through your saved coordinates by using either the MODE/MENU or

MUTE/CANCEL buttons. Please note that if you press the SELECT button

(button 3) at any time whilst in this option it will automatically delete the

coordinates displayed. Any coordinates stored will be listed in numerical

order – MEM 01, MEM 02, MEM 03 etc. Use buttons 1 or 2 to scroll up or

down to view your stored coordinates.

If you wish to clear all your personal locations press the SELECT button when

‘All Clr’ is displayed. The unit will display the message ‘All Clr?’ press the

SELECT button again and the unit will confirm that they have been deleted by

displaying ‘Cleared’ and will then return to the Menu.

8. Automute

The Automute setting offers the user an alternative audible alert. If Automute

is selected, when your device detects a signal, rather than continually

beeping through the alert, it simply beeps at your selected volume for five

seconds and will then automatically mute the sound to volume level 3 until

you are out of range of the source. This allows you to receive a brief audible

alert instead of a continuous one.

To activate or deactivate Automute press either the MODE/MENU button

(button 1) or the MUTE/CANCEL button (button2) to scroll up or down and

select ‘ON’ to activate or ‘OFF’ to deactivate. Once you have chosen your

desired setting press the SELECT button (button 3). The unit will confirm the

new setting by displaying ‘Changed’ twice and will return to the Menu.

9. Smart

The Smart Mute setting provides an alternative alert when approaching a

fixed speed safety camera. If you are travelling below the posted speed limit

the unit will provide an audible and visual alert but as the unit counts down

the distance to the fixed speed safety camera the rest of the alert will be a

visual alert only. If you are travelling above the posted speed limit you will

receive both an audible and a visual alert as normal. Once you drop below

the posted speed limit for that fixed speed safety camera the audible alert will

cease and the unit will only provide a visual alert.

To adjust the Smart Mute setting press either the MODE/MENU button

(button 1) or the MUTE/CANCEL button (button2), select your preferred

setting of either ON or OFF and then press the SELECT button (button 3).

The unit will confirm the new setting by displaying ‘Changed’ twice and will

return to the Menu.

Features and Settings

Return to contents

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper Evolution Plus Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info