Bedienungsanleitung Snooper Evolution (Seite 20 von 28) (Englisch)

619679

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

using this option it will automatically delete the coordinates displayed. Any

coordinates stored will be listed in numerical order – MEM 01, MEM 02, MEM

03 etc. Use buttons 1 or 2 to scroll up or down to view your stored

coordinates.

If you wish to clear all your personal locations press the SELECT button

when ‘All Clr’ is displayed. The unit will display the message ‘Del All?’ press

the SELECT button again and the unit will confirm that they have been

deleted by displaying ‘All Clrd’ and will then return to the Menu.

7. Smart

The Smart Mute setting provides an alternative alert when approaching a

fixed safety camera. If you are travelling below the posted speed limit the unit

will provide an audible and visual alert but as the unit counts down the

distance to the fixed safety camera the rest of the alert will be a visual alert

only. If you are travelling above the posted speed limit you will receive both

an audible and a visual alert as normal. Once you drop below the posted

speed limit for that fixed safety camera the audible alert will cease and the

unit will only provide a visual alert.

To adjust the Smart Mute setting press either the MODE/MENU button or the

MUTE/CANCEL button, select your preferred setting of either ON or OFF and

then press the SELECT button. The unit will confirm the new setting by

displaying ‘Changed’ twice and will return to the Menu.

8. Logic

There are a number of different ways that you can programme your Snooper

Evolution to locate fixed cameras. You can choose between three different

Logic Modes:

Logic 1

When this mode is selected your unit will alert you via your chosen audible

alert as well as visual alerts of fixed cameras on both sides of the road.

Logic 2 (Factory Default Setting)

When this mode is selected your unit will alert you via your chosen audible

alert as well as visual alerts of fixed cameras on your side of the carriageway

only. The unit will not indicate the presence of cameras or monitoring vehicles

on the opposite side of the carriageway as you approach them.

Logic 3

When this mode is selected your unit will alert you with a hard tone audible

alert as well as visual alerts of fixed cameras on your side of the carriageway

but will only give you a soft tone audible alert and a visual alert of cameras on

the opposite side of the carriageway as you approach them. If you have voice

alerts selected you will get a voice alert as well as visual alerts of fixed

cameras on your side of the road and just a soft audible and visual alert of

cameras on the other side of the carriageway.

Selecting Your Preferred Logic Mode

To change the logic mode press either the MODE/MENU button or the

MUTE/CANCEL button to select your preferred logic mode. Once you have

Features and Settings

Return to contents

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper Evolution Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Snooper Evolution

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info