Bedienungsanleitung Snooper Indago (Seite 21 von 47) (Englisch)

619606

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

A list of your most recent routes will be shown in chronological order, use the down arrow on the right hand side of the

display to scroll through the list and select the destination you would like the Indago to navigate to. An ‘Information Of

Destination’ screen will appear confirming the address you have selected.

If you would like to view a map of the recent destination, press ‘Map’. To return to the ‘Information Of Destination’ page

press the return arrow located in the bottom right hand corner of the display. If you would like to change any of the

route parameters press ‘Route Option’ (see Route Option on page 36 for specific instructions). To return to the

‘Information Of Destination’ page press ‘Done’.

Press ‘Calculate’ and the Indago will now calculate the route to your selected recent destination. Once the calculation is

complete the summary screen is displayed. You can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual

route, ‘Route Options’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions.

3.9 (Points of Interest)

If you would like to calculate a route to a hotel, airport, restaurant or even a golf course the Indago can calculate a route

using its extensive database of POI’s (Points of Interest). To navigate using this database touch the centre of the Indago’s

display to access the menu. Press the Arrow and then select the ‘Find by POI’ icon as shown. You can then choose

how you would like to find the POI from the selections shown on screen.

3.9.1

This option will help you to find the nearest POI by Category within a specified

radius. When you press the ‘Find by Nearest’ icon this radius can be configured

from a minimum radius of 10 miles up to a maximum radius of 60 miles from

your current location and can be increased or decreased by 10 mile increments.

The default setting is 30 miles. To select your desired radius press the tick box

next to the distance you require than press the ‘OK’ button at the bottom of the

display.

Enter the type of POI you would like to navigate to and as you begin to input the

POI, the device will automatically prompt you with a list of possible POI’s. If you

can see the name of the POI you are searching for in the lower window you can access it easily by selecting it with your

finger. If you wish to view the list of POI in full, press the down arrow to the top right hand corner of the display and a list of

POI will be displayed, then choose your destination POI by selecting it with your finger.

An ‘Information of Destination’ screen will appear confirming the POI you have selected. If you would like to view a map of

the POI, press ‘Map’. To return to the ‘Information of Destination’

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper Indago Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Snooper Indago

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info