Bedienungsanleitung Snooper Lynx (Seite 10 von 22) (Englisch)

619670

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Return to contents

Charging the internal battery

Lynx can be charged using either the cigarette lighter adaptor in your vehicle or via the mains adaptor. If the unit is turned on the

battery charge icon will be animated during charging.

Once fully charged the battery will last approximately 3 hrs during normal use.

Note: The new battery’s full performance is only achieved after two or three complete charges and discharges.

Direct connecting/hard wiring Lynx

You can power Lynx by wiring it directly to your vehicles 12V electrical system using the ‘Hard Wire’ cable which is supplied as

standard with your unit. First connect the positive side of the cable (marked with a red plus symbol) to a 12V switched live. This is

a live that is ON when the ignition is ON and OFF when the ignition is OFF. The negative side of the lead should be connected to a

negative ground, so it can be attached to any metal portion of the vehicles frame. Next plug the small adaptor on the other end of

the lead into the 12V DC input socket on the left side of the unit.

Important: If you are unfamiliar with this procedure, please consult a professional auto electrician.

Operating Instructions

1. Using Lynx for the ﬁrst time

Firstly Lynx will need to establish a connection to the GPRS network. The time taken can vary, please refer to page 6. After you

have installed Lynx into your vehicle it is time to perform the rst start up. First make sure your vehicle is parked in as open a space

as possible, clear of tall trees and buildings so that Lynx has clear a view of the sky above. Next switch the unit on by pressing

the Standby Power button for two seconds. The LCD graphical display will briey display the ‘Lynx’ logo, Logic # (see Section 11),

Mway, City or All (see Section 7) and nally ’Searching for Satellites’ will ash on the screen as the unit begins to search for satellite

connection.

Lynx needs to acquire a minimum of four satellites in order to work. Once this has been achieved Lynx will proceed to the Standby

screen of your choice (See Standby Screen below). As soon as the standby screen is displayed Lynx is ready to use and will now

automatically alert you of any locations stored in its database. A variety of audible and visual alert patterns are available. See ‘Features

and Settings’ later in this user manual for more detailed information.

As the GPS engine and antenna have never been used before, the ﬁrst ‘Cold’ start could take anywhere from 15 – 50 minutes to

establish a satellite connection. Once initialised, subsequent start ups will take less time and eventually should take only a matter

of minutes.

Please Note: If the unit is not used for some time the initial GPS start up may take longer than when the unit is used regularly.

2. Standby Screen

There are eleven dierent screen colour settings for the standby display. To change the

screen colour:

Press the ‘MENU’ button to enter the menu – the ‘Set Alert Range’ menu option will be



displayed.

Push the ‘UP’ button until ‘Change Screen Colour’ is displayed and then press the ‘OK’



button.

Ptress the ‘UP’ and ‘DOWN’ buttons to scroll through the screen colour options. When your preferred setting is displayed, press the



‘OK’ button again. The unit will conrm the new setting has been stored.

If you would like to exit the Menu at any time press either the ‘Target’ or the ‘MENU’ button. If no buttons are pressed for a period of

ve seconds the unit will automatically exit the Menu and return to your chosen standby display.

Change Screen Colour

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper Lynx Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info