Bedienungsanleitung Snooper Lynx (Seite 15 von 22) (Englisch)

619670

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Return to contents

Highlight your desired option (‘ON’ or ‘OFF’) by pushing the ‘UP/DOWN’ button upwards or downwards.

Once you have highlighted your desired setting press the ‘OK’ button. The unit will display ‘Setting Conrmed’ indicating the 

setting has been saved.

Note: If voice alerts are turned ‘OFF’ the unit will alert you to the location of a Fixed Speed Safety camera by a series of beeps.

The visual display will remain the same.

7. User Points

It is possible to add and edit your own personal locations on Lynx. To add a new location

make sure you are stationary and parked in a safe, legal manner then press the ‘Target’

button, highlight ‘Save to Device’ by pressing the power button twice then press the

‘Target’ button to store the location.

NOTE: If you save a user point to the device it will not be shared with other Lynx

users.

To view your saved coordinates:

Press the ‘OK’ button when ‘User Points’ is displayed in the menu options.



‘Edit’ is highlighted by default. Press the ‘OK’ button to view or edit your stored coordinates.

To scroll through the user points you have stored push the ‘MENU’ button to select the user point. 

To edit the user point:

Once you have selected the user point that you wish to edit push the ‘UP/DOWN’ button downwards – ‘CAM TYPE’ will be selected.



Push the ‘MENU’ button until the correct camera type is displayed.

Push the ‘UP/DOWN’ button downwards – ‘LIMIT’ will be highlighted. Push the ‘MENU’ button until the correct speed limit for that



location is displayed.

Push the ‘UP/DOWN’ button downwards – ‘SPD TYPE’ will be highlighted. Push the ‘MENU’ button to select either ‘MPH’ or ‘KMH’



Once you have made your changes press the ‘OK’ button. The unit will display ‘Setting Conrmed’ to indicate the changes have 

been saved.

Troubleshooting – Saving New Coordinates

When you attempt to save a new coordinate but the display reads ‘Weak Signal!’ it means that Lynx is not receiving sucient signal

strength to plot the position. Please ensure that Lynx has a clear view of the sky, the unit is displaying the standby screen and then

try again.

When you attempt to save the new coordinate and the display reads ‘Memory Full’ it means that the memory in Lynx is completely

full. If you want to store any new coordinates you will have to either delete some or all of the existing coordinates stored in the unit’s

memory.

Deleting Stored Coordinates

If you would like to delete any of the coordinates you have stored in your units memory:

Press the ‘OK’ button when ‘User Points’ is displayed in the menu options.



To delete individual user points highlight ‘Delete’ by pushing the ‘UP/DOWN’ button downwards. Once ‘Delete’ is selected press the ‘OK’ 

button.

Push the ‘UP/DOWN’ button to scroll through the stored user points. Once the coordinates you wish to delete are visible on the



display, press the ‘OK’ button.

A new screen will be displayed asking you to ‘Conrm Delete?’. If you wish to delete the coordinate highlight ‘Yes’ and then press



the ‘OK’ button. If you do not wish to delete the coordinate highlight ‘No’ and then press the ‘OK’ button.

User Points

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper Lynx Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info