Bedienungsanleitung Snooper S2500 (Seite 10 von 99) (Englisch)

619616

Zoom out

Zoom in

Vorherige Seite

1/99

Nächste Seite

10 • EN

Return to contents

Start Up

The Micro-SD Card comes complete with digital mapping and is also where the

AURA™ camera database is stored if you choose to subscribe and download it.

Switch on the device by pressing and holding the standby power button located

on the top of the unit for 2 seconds. The Snooper will automatically synchronise

with the Micro-SD Card. Once the synchronisation is completed, the Micro-SD Card

will not function with any other device. Snooper is now ready to navigate and the

camera database can be downloaded if necessary. NOTE: In most cases the Micro-SD

card is already installed in the device.

Please note that if the unit does not activate when you press and hold the standby power button for 2 seconds it may require

charging. Refer to the section ‘Charging the internal battery’ later in this manual.

System Requirements and Downloading

Before you can begin to download the AURA™ database onto Snooper, you will need to install the Snooper Updater software

provided on the software CD.

In order for the software to be installed successfully, there are certain minimum hardware and software requirements needed.

Minimum Hardware Requirements

The computer must have an Intel Pentium Class processor or equivalent, a minimum of 32MB of RAM, a monitor with 256 (8-bit)

colours or greater, a CD ROM drive, 20MB of free disc space and a spare USB connection.

Minimum Software Requirements

The software will only operate on the following Windows based operating systems:

Windows Vista

Windows 7, 8 and 8.1

and, in addition, will only work with Internet Explorer 6 or Netscape Navigator 6 or above.

NOTE: Snooper Updater software does not support Windows 95, 98, Millennium, 2000 , XP or Apple Macintosh operating

systems.

Software Installation Instructions

Place the Software CD into a CD ROM or DVD drive. The CD should auto run and launch the Snooper menu. Choose your language,

then, if you have registered, click ‘Next’. Select the type of unit you have from: Ventura, Syrius or Truckmate. Follow the on screen

instructions.

To launch the CD manually: Click on ‘Start’ and then ‘Run’. In the dialogue box that opens click on ‘Browse’ – another dialogue box

will open. Locate your CD ROM or DVD drive (drive letter is normally D) using the ‘Look in’ option and select ‘Snooper’ from the lower

portion of the dialogue box. Once you have selected ‘Snooper’ click on ‘Open’ on the explorer box and then ‘OK’ on the Run dialogue

box.

Any updates to the speed camera updater software can be obtained from www.snooperneo.co.uk/software.cfm. If you have any

problems using this software please call 0333 240 1000 during oﬃce hours and select Option 3.

Once the software is installed, you are ready to download the speed camera database onto Snooper. Once the initial setup is

completed the speed camera updater software icon is displayed on your desktop.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper S2500 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Snooper S2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info