Bedienungsanleitung Snooper S7000 - VenturaXL PRO (Seite 65 von 87) (Englisch)

588711

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

65 • UK

Return to contents

Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be

taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey.

The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to

complete your journey.

Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to

provide you with turn-by-turn instructions.

6.2.3

Clear Avoided Road

If you do not wish to use the alternative routes oﬀered by S7000 and you wish to return to the original calculated route, press the

‘Clear Avoided Road’ button and the original route plotted by S7000 will be restored.

Once the re-calculation of the original route is complete the summary screen is displayed. Once the calculation is complete you can

either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken, ‘Route Option’ to change the parameters

of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The ‘Summary Screen’ will tell you the distance to

your destination, estimated time of arrival and the estimated time it will take to complete your journey.

Please Note: If you have already travelled some of the re-calculated route, S7000 may produce a slightly di erent route from

what was originally plotted.

The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with

turn-by-turn instructions.

If the ‘Avoid by Road’ and ‘Avoid by Range’ have not been used, this feature is unavailable and the button will be greyed out.

6.3 Navigate Via Location

If you would like to calculate a route to a destination but want to go via a speciﬁc

location along the way you can use this function. Simply input the details of your ﬁnal

destination as usual but press the ‘Route Option’ button in the summary screen and

then select the ‘Navigate Via Location’ button. You are provided with the following

search options:

● Find address by City

● Find address by post code

● Find by POI

● Find by recently used

To nd out how to use these options please refer to the applicable sections in this user manual.

Once you have found the address or location you would like to go to via your route, press

the ‘Set’ button. A red tick is now displayed on the ‘Navigate Via Location’ button.

Now press the ‘Done’ button followed by the ‘Calculate’ button.

If you would like to check the route calculated prior to departure press the ‘Guide’

button on the Summary screen which will give you a list of each turn by turn instruction

from the start of your journey to the end.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper S7000 - VenturaXL PRO Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Snooper S7000 - VenturaXL PRO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info