Bedienungsanleitung Snooper Syrius PROLINE S2000 (Seite 54 von 61) (Englisch)

68761

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

Return to contents

9.0 Speed Camera Alert Patterns

To enable your Syrius to alert you to Fixed Speed Cameras and Accident Black spots you will have to

Camera Database.

9.1 Fixed Speed Safety Cameras

As you approach a xed speed safety camera the unit will begin to provide both a voice alert stating

the type of camera you are approaching and the xed speed limit for that camera and a visual alert

displaying the same information. The unit will also provide an audible tone (either a Soft or Hard beep

depending on your personalised setting) and the Syrius will provide updated information indicating

the distance to the camera. As you move closer to the camera the ‘beeping’ will quicken. Once you

have passed the xed speed camera location, the unit will reset ready to alert you to the next potential

accident black spot.

To cancel an alert press the camera alert section of the screen the

denotes that the alert has been

muted

9.2 Risk Zones

The alert for a Risk Zone is the same as the Fixed Camera Alert.

9.3 SPECs Safety Camera Systems

Due to the fact that the SPECs camera incorporates a series of cameras that monitor a vehicles average

speed over a xed distance, a different alert pattern has been devised to ensure that your concentration

is maintained throughout the danger zone.

When approaching the rst camera in the SPECs system your Syrius will begin to alert you at

approximately 700 yards with a display indicating ‘SPECS START’ and emitting an audible alert.

The display will indicate the speed limit at this point and then count down the remaining distance to the

location of the camera. The unit will then emit an audible alert and ash ‘SPECS’ every few seconds to

remind you that you are still within the ‘SPECS’ system.

The Syrius will indicate the end of the SPEC’s sequence by displaying ‘SPECS END’ and emitting an

audible alert.

If after thirty seconds you do not pass another camera, for instance if you have turned off the road without

passing the last camera in the SPEC’s sequence, the warning will no longer be displayed.

Please Note: If you join a road in the middle of a SPECs series you will automatically get a visual

and audible alert, indicating the type of camera, 300 yards before the rst camera that you pass.

9.4 Saving User Points

If in the unlikely event that you pass the location of a safety camera and your Syrius does

not provide you with an alert, you have the opportunity to store the coordinates of that

location manually. Simply park safely and as close as possible to the site, then press and

hold the ‘M’ button for approximately two seconds. The following dialogue box will be

displayed.

Press the OK button to store the new location or press cancel if you do not wish to store

the new user point.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper Syrius PROLINE S2000 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info