Bedienungsanleitung Snooper syrius (Seite 31 von 45) (Englisch)

163031

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

5.4.1.4

This option allows you to display either the estimated time of arrival

(ETA) or the estimated remaining time left for your journey towards

the bottom of the navigation screen.

To save any of the changes press the ‘OK’ button at the bottom of

the display. If you wish to keep the settings unchanged you can exit

the ‘Setup’ menu by pressing the return arrow located in the

bottom right hand corner of the display.

Your new settings will now be saved and will appear on the screen

each time you use your Syrius.

5.5

The Syrius comes complete with a comprehensive list of POI’s

(Point’s of Interest). You can search for addresses using POI’s and

save POI’s in your list of favourites. You can also choose which of

these POI’s you would like to have indicated on your map. As

standard ALL POI’s are shown, however this list can be edited

within the POI Menu.

Access the Menu by touching the centre of the Syrius’s display,

press the ‘Configure’ button at the top of the display and then press

the ‘Show POI’ icon. The screen will now show a list of POI’s stored

on your unit with a ‘tick’ box to the left of each type of POI. Simply

press the tick box to select or deselect the POI. A red tick in the

box indicates that the POI will appear on your map, an un-ticked

box will remove the POI from the map view. To scroll through the

list of POI’s you can press either the up or down arrows located on

the right hand side of the display.

To deselect ALL POI’s from the map un-tick the ALL tick box at the

top of the list of POI’s

To save the changes press the ‘OK’ button at the bottom of the display. If you wish to exit the ‘Show POI’ list without

saving any changes press the return arrow located in the bottom right hand corner of the display

5.6

Auto Scale is programmed by default to ‘On’ during manufacture.

Auto Scale automatically magnifies the map as you approach a

junction or roundabout, where you may need to make a turning, so

that you can see it in more detail.

Auto Scale can be turned on and off as you wish. To change this

setting, enter the Menu by touching the centre of the Syrius’s

display, press the ‘Configure’ button at the top of the display. Press

the arrow button and finally press the ‘Auto Scale’ icon. The

screen will now show two options ‘Yes’ and ‘No’. Make your selection by

touching the tick box next to the option you would like to choose.

To save the setting press the ‘OK’ button at the bottom of the display. If you wish to keep the setting unchanged you can

exit the ‘Auto Scale’ configuration menu by pressing the return arrow located in the bottom right hand corner of the

display.

Return to contents

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper syrius Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Snooper syrius

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info