Bedienungsanleitung Snooper Ventura PRO DB8500 (Seite 94 von 107) (Englisch)

588832

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

94 • UK

Return to contents

8series100614

SOUND

To enter and adjust the sound settings of the DB5800 press the

SOUND tab.

VOLUME

To adjust the master volume of the 8 Series press the right arrow

to increase the volume and the left arrow to decrease the volume

TOUCH SOUND

The touch screen ‘beep’ can be switched On or Oﬀ

SMART MIX

Smart mix On With smart mix On when the navigation turn by turn commands are spoken the Navigation volume will

remain at the same level BUT the DAB volume will be decreased by 50%.

Smart mix Oﬀ: With smart mix Oﬀ when navigation turn by turn commands are spoken the volume level of the

navigation AND DAB will not change.

FMT (FM Transmitter)

FM Transmitter On: All of the audio output from the DB5800 will be transmitted via FM frequency to the vehicle radio

(see

for tuning instructions).

E.G. If the FMT and DAB are switched On then the DAB audio will be played through the in car radio and heard through the

vehicle speakers, if this function is used in conjunction with navigation the turn by turn command will also be heard

though the vehicle speakers.

NOTE: When FM Transmitter is switched On the internal speaker of the 8 Series will be muted

FM Transmitter Oﬀ: When the FM-T is Oﬀ all of the audio output from the 8 Series will be heard through the 8 Series’s

internal speaker.

FM Frequency To transmit clear audio from the FM Transmitter, it is best to ﬁnd a clear FM frequency that is not being

broadcast on and free from interference, this will reduce any possible interference. Up to 5 frequency can be stored in the

the ‘pre sets, located at

1. Press FMT On

2. Scan the FM frequencies on you vehicle radio and locate empty frequencies which, preferably, does not have any

music or talking, make a note of the frequency E,G 108.00Mhz or 87.5MHz are normally clear in the UK.

3. Press one of the pre sets

then using the left or right button

tune the FMT to one of the spare frequencies

EG 108.00MHz.

4. Repeat this to store up to 5 pre set frequencies.

To listen to the the 8 Series through the vehicle radio:

1. Tune the vehicle radio to one of the frequencies stored in the FMT presets.

2. Switch the FMT On in the SOUND menu.

3. Select, by pressing, the frequency preset

(same as frequency as in step 1)

The audio output from 8 Series should now be heard via the vehicle radio, the volume output level of the 8 Series

can be adjusted by using the volume control

RESET Press to reset the brightness to the factory defaults

EXIT Press to exit the sound menu and return to the home screen

BRIGHTNESS

The brightness of the LCD screen can be adjusted by pressing the

right (brighter) or left (dimmer) arrows.

NOTE. The brightness of the navigation screen can not be controlled in

this screen, it can only be adjusted from within the navigation menu.

If the brightness is ‘greyed out’ then you must exit navigation before

opening this menu screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper Ventura PRO DB8500 Seite 94

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Snooper Ventura PRO DB8500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info