Bedienungsanleitung Snooper Ventura PRO S8000 (Seite 75 von 107) (Englisch)

588828

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

75 • UK

Return to contents

8series100614

Other routing options are:

6.2 Navigate Avoiding Road

Please note: This option can only be used once a route has been calculated. If a route has not been calculated then this is

indicated by the button being greyed out.

6.2.1 Avoid by Road Name

If you know the road name or road number you wish to avoid, then select

this option.

 Press ‘Avoid by Road Name’.

You will be provided with the turn by turn instructions of the route that you

are currently following. If the road you are looking for is not visible, press the

down arrow on the right hand side of the display to see further turn by turn

instructions.

 Once you have found the road that you wish to avoid, select it with your ﬁnger.

Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be

taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey.

The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to

complete your journey.

Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide

you with turn-by-turn instructions.

6.2.2 Avoid by Range

If you wish to avoid several roads from the selected route calculated by

Snooper, then this function allows you to re-calculate a route over a user

deﬁned distance, ranging from 1 mile up to a maximum of 100 miles.

To use this function:

 Press the ‘Avoid by range’ button - the ‘Select avoided range’ page will

be displayed.

 Select the distance of the range you wish to avoid.

If you wish to view more range distances then press the down arrow on

the right hand side of the display. Once you have selected the range you wish to avoid, Snooper will automatically re-calculate your

route.

Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be

taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey.

The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to

complete your journey.

Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to

provide you with turn-by-turn instructions.

6.2.3 Avoid by TMC

Choosing this option will avoid TMC incidents or delays - refer to page 70 for further details.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper Ventura PRO S8000 Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Snooper Ventura PRO S8000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info