Bedienungsanleitung Soehnle 63868 - Shape Sense Profi 100 (Seite 6 von 38) (Alle Sprachen)

662823

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

A. Operating elements

1. Minus ( )

2. Confirm (

)

3. Plus (

)

B. Preparation

1. Insert batteries.

Note:

Place the body analysis scale immediately on

a solid and even surface (as long as „0,0“ is

still displayed) and wait until the scale turns

off automatically.

Only then begin with data input. Note, it

might occur that the initial scale weight is

being added erroneously to the personal

weight process.

The same may happen during regular operati-

on, if scale is held in the hand prior to the

weight process.

2. Place scale level on a solid and even surface

(not carpet). This applies for all measure-

ments.

3. Cleaning and care: use only a lightly damp

cloth for cleaning. Do not use solvents or

abrasives. Never submerge scale in water.

4. A country-specific option, to switch from kg/

cm to lb/in or st/in, is available on the back of

the scale by pushing button.

Attention! Slipping hazard

in case of wet surface.

C. Data input

1. Push button.

2. Use

/ buttons to select memory slot. Use

to confirm.

3. Then use

/ buttons enter body height and

confirm.

4. Enter the age and confirm.

5. Select gender and confirm (Press

button

3 sec.).

6. Place the body analysis scale immediately on

the floor, wait until screen displays „0,0“ and

then step on the scale with bare feet.

The initial measurement is indispensable and

serves to store data for later automatic recog-

nition. If user does not step on the scale, data

cannot be saved and must be entered again.

The first body analysis is performed after a

person steps on the scale.

This scale is equipped with a timeout mode.

It will automatically switch off after approx.

40 seconds, if no buttons are pressed.

Data must be entered again after battery

change.

D. Body analysis

Place scale on solid and even surface. Wait

until scale switches off automatically.

1. Step barefoot onto scale. Stand still.

2. Determined body weight is displayed.

The automatic user recognition follows.

3. If the determined values cannot be clearly

allocated to one user, the possible memory

slots will be displayed.

If the determined weight can be allocated to

more than 2 users, other possible memory

slots will be displayed after 3 seconds.

Use the

/ keys ( = left, = right) to con-

firm the memory slot displayed there.

The scale measures body values (body fat,

body water) and BMI (Body Mass Index).

The 9-segment status bar shows the respecti-

ve deviation from the normal value (see over-

leaf).

The scale turns off auto matically.

Classification of body weight according to BMI

(Source: World Health Organisation, 2016)

BMI (kg/m²) classification

< 18.5 Underweight

18.5 - 24.9 Normal weight

25.0 - 29.9 Pre-Obesity

30.0 - 34.9 Obesity level I

35.0 - 39.9 Obesity level II

> 40.0 Obesity level III

63868-BA-PWD-Shape-Sense-Profi-100-14028-A-Content-04-11-2016.indd 4 04.11.2016 17:21:50

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soehnle 63868 - Shape Sense Profi 100 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info