Bedienungsanleitung Sogo SS-1287 (Seite 22 von 88) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

798726

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

español english français portuguese deutsch italiano

shown in Fig.5 and Fig.6).

Notes: 1. the flat end of the exhaust pipe joints must

be snapped into place.

2. The pipe cannot be distorted nor has substantial

turning (greater than 45 °). Keep the ventilation of

the exhaust pipe not blocked.

Important Notice

The length of the exhaust hose shall be

280~1,500mm, and this length is based on the speci-

fications of the air conditioning. Do not use extension

tubes or replace it with other different hoses, or this

may cause a malfunction. Exhaust host must be not

blocked; otherwise it may cause overheating.

Control Panel Setting

I. Operating instructions:

LED Control Panel is as follows:

1. Timer Key

2. Fan Speed Selection Key

3. Up Key

4. Display Window

5. Down Key

6. Mode Selection Key

7. Power Key

1: When the machine is powered on for the first time,

the buzzer will play power-on music, and then the

machine will get into standby status.

2: Power Key: press the key to turn on and turn o󰀨

the machine. In the case of power on, press the

key to turn off the machine; in the case of power

off, press the key to turn on the machine

3: Mode Selection Key: In the case of power on,

press the key to switch between cooling → fan →

dehumidifying mode.

4: Up Key and Down Key: press the two keys to

change the setting temperature or setting time,

operate as follows:

While setting temperature, press up key or down key

to select the required temperature (not available in

fan or dehumidifying mode).

While setting time, press up key or down key to select

the required time.

5: Wind Speed Selection Key:

In cooling and fan mode, press the key to select high,

low wind speed operation. But limited by anti-cold

conditions, under certain conditions, it may not run

according to the set wind speed.

In dehumidifying mode, pressing the key is invalid,

and the fan will forcibly choose low wind speed ope-

ration.

6: Timing Key:

In the case of power on, press the key to close timing;

in the case of power off, press the key to open timing.

Press the key, when the timing symbol flashes, press

up and down key to select the required timing value.

Timing values can be set in 1-24 hours and the timing

value is adjusted up or down by one hour.

7: Sleep Mode:

In the cooling, Mode, Press the UP and Fan Key to

turn on the sleep mode, then the unit will work on

Energy-Saving and quiet type.

Note: Cannot turn on the sleep mode in the dehumi-

difying or Fan mode!

II. Operating Instructions of the Remote Control

The remote-control Panel is as follows:

Instructions of key operation of

the high-quality remote control

are as follows:

1. Power: Press the key to

turn on or turn off the

machine.

2. Timer: press the key to

set timing.

3. Down: press the key to

reduce tem-perature and

timing set value.

4. Mode: press the key to

switch between

cooling, fan, dehumidi-

fying mode.

5. Up: press the key to increase temperature and

timing set value.

6. Fan: press the key to select high, low wind speed.

7. Sleep Mode: Press the key to turn on the sleep

mode.

III. A Variety of Protection Functions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sogo SS-1287 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info