Bedienungsanleitung Sogo SS-21075 (Seite 11 von 36) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

798725

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

11español english français portuguese deutsch italiano

6. Ionizer Press ‘Ion’ button to activate the ionizer function. Ion icon on the screen will light and the

negative ion release will start. Ions attract to tiny particles in the air such as dust pollen, mold spores

etc. Which cause them to become too heavy to remain airborne. This feature let us to have dean air in

the environment.

7. Remote control: Works with CR2025 button cell. Before use, please pull out the card which is inserted

at the button of the remote control.

OPERATING THE WATER TANK

Check the level of water in the tank frequently. Be sure that water level is rat below the ‘MIN’ marking

which is located on the water lank. Activating the ‘Cooler’ function with insu󰀩cient amount of water may

cause malfunction of the water pump and the warranty of your product will be void.

Before relling water, turn your unit lo `O󰀨 position by pressing the switch located on the back panel and

unplug the power card.

USING THE ICE TUBES

In order to increase the cooling e󰀨ect of your fan, you can use ice tubes which are supplied with the

unit. Before using, ll them with water and place them in the freezing compartment of your refrigerator

for a few hours. Then place them into the large section of the tank and add water to the ‘MAX’ level.

Using the ice tubes will drop the temperature of the air ow which will create more e󰀨ective cooling

e󰀨ect.

CLEANING AND MAINTENANCE

After operation for long time, the dust cumulated in the dust lter or cooling pad may inuence the inow

of air. Therefore, it is recommended to clean your fan regularly. Please follow the steps below to clean

your device.

Turn o󰀨 the unit and unplug the power cord before cleaning and maintenance.

1. Dust Filter

To remove the dust lter, rst remove the screw, then simply press the locks with both hands and pull

it out. Use neutral cleaning agent and brush to clean the dust and dirty on the lter. To attach the clean

lter, place the bottom of the lter rst and then push upper part until it is locked tightly.

2. Cooling Pad

After removing the dust lter, you can see the cooling pad. Press the lock in the middle and gently pull

out the pad, use a clean or soft brush to remove dust and dirt from the pad. Rinse with water if needed

and Leave it to dry in open air. Never use any chemical cleaning solution that can harm pad.

3. Water Tank

Turn the water tank lock to horizontal position and pull the tank. Use soft cleaning agents for cleaning.

Wash with water and rinse the place it to its housing by pushing gently. Turn the lock to vertical position.

4. Exterior Cleaning

Clean the exterior case of the fan with a soft damp cloth except control panel. Never use hard cleaning

agent that can harm the case. Make sure the unit is dry before operating it.

Caution: Never let water contact with the control panel. Always clean it with a soft dry cloth.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sogo SS-21075 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info