english français portuguese
order to make sure the unit is turned off.
4. Fill the jug with the desired foods
5. Put the cover
Place the measuring cup on the center of
cover, anticlockwise rock the measuring
cup slightly.
6. Turning the knob to required speed(P—
pluse,1—low speed,2—high speed)
SPEED ADJUST
P—pulse –Stainless steel blade operate with
transitorily highest speed, suitable for ice.
1—low speed - Stainless steel blade operate
with low speed, suitable for elementary
blending.
2—high speed - Stainless steel blade operate
with high speed, suitable for symmetrical
blending.
0—turn off the unit.
CAUTION
1. the operation, please
turn off the unit and do not connect the
plug, take out some of material, then
operating.
2. Do not use unit continuous more than 2
minute
CLEANING AND STORAGE
•In addition to this, you must refer to the
security precautions.
•Do not clean Motor main body, power
cord and plug with water.
•Clean the engine base with a soft, wet
piece of cloth and some mild cleaning
agent.
•Fill the jug half-full with hot water and a
little cleaning agent. Let the unit run on
speed 2 until the jug is clean.
•The base with the blades can be taken
apart. Screw of the base counter-
clockwise. Take out the blades together
with sealing ring facing upwards.
•Now clean jug, cover, closure, base and
blades with sealing ring with hot water
and some cleaning agent. Dry well before
re-using. Caution! The blades inside of
the jug are very sharp.
•Never use aggressive cleaning agents.
INSTALLATION
1. Clean the measuring cup, cover and
jar(except main body)and so on before
2. To make sure the unit is turned off and not
to connect before installation.
3. First ring the jar sealed ring into blade
base, then enclose the blade base into jar,
last rock the jar slightly causing it to lock
into place.
4. Put the jar base on the top of motor
mainbody, please pay attention to match
the position of jar and the bulge of the
motor main body. Fill the jug with the
desired foods. please ensure the water
not spill over from cup.( Maximal water
capacity can not exceed 1500 ml)DO
NOT USE THE UNIT WITHOUT ANY
MATERIAL INSIDE.
5. Put the cover on top of the jar and push
it down. Insert the closure into the cover
and turn till it locks into place.
6. Place the measuring cup on the center of
cover, anticlockwise rock the measuring
cup slightly.
OPERATION
1. Connect the power.
2. This unit have safety design, it do not
working if the jar is not install on motor
main body properly.
3. turn the turning knob */0/1/2 to position 0 in
PARTS ITEM
Do not to touch the sharp blade. When
accidentally injure.
1. Unit suitable for household.
2. Do not use for commerce. Otherwise the
maintain service will invalid.
