Bedienungsanleitung Sogo SS-5685 (Seite 12 von 48) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

797941

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

español english français portuguese deutsch italiano

KNOW YOUR COFFEE MAKER

BEFORE THE FIRST USE

To ensure the rst cup of co󰀨ee tastes excellent, you should rinse the co󰀨ee maker with warm water

as follows:

1. Open water tank cover, ll water into water tank, water level should not exceed the “MAX” mark

in water tank. Then replace the water tank cover.

Note: the appliance is supplied with a detachable water tank for easy cleaning, you can ll water tank

with water rst, and then attach water tank into the appliance.

2. Set steel mesh into metal funnel (no co󰀨ee in steel mesh), make sure the tube on the funnel aligns with

groove in the appliance, then insert the funnel into the appliance from the “INSERT” position, and x

them into co󰀨ee maker rmly by turning it anticlockwise until it is at the “LOCK” position.

3. Place an jug on removable cup shelf. Make sure steam control knob is on the OFF position.

4. Connect into power source, press power button, power indicator is illuminated white, The indicators

of 1- cup co󰀨ee button, 2-cup co󰀨ee button and manual co󰀨ee button ash, the machine begins

preheating, after all indicators are solidly on, the preheating is completed

Note: if preheating is not completed yet, press 1-cup co󰀨ee button, 2-cup co󰀨ee button or manual

co󰀨ee button, its indicator ashes quickly and the pump does not work, press this button again, its

indicator returns to the preheating state.

5. Press Manual co󰀨ee button, the unit will pump water for about 30s, pour out water in the cup then clean

them thoroughly, now the appliance is ready for making co󰀨ee.

Note: There may be noise when pumping water for the rst time, it is normal that the appliance is

releasing the air inside. After about 20s, the noise will disappear.

PREHEATING

To make a cup of good hot Espresso co󰀨ee, we recommend you should preheat the appliance before

making co󰀨ee, including metal funnel, steel mesh and cup, so that the co󰀨ee avour can not be inuenced

by cold parts.

1. Remove detachable water tank and open water tank cover to ll it with desired water, the water level

should not exceed the “MAX” mark in the tank. Then replace water tank

2. Set steel mesh into metal funnel, make sure the tube on the funnel aligns with groove in the appliance,

then insert the funnel into the appliance from the “INSERT” position, and x them into co󰀨ee maker rmly

by turning it anticlockwise until it is at the “LOCK” position.

1-cup co󰀨ee button

2-cup co󰀨ee button

Power button

Manual co󰀨ee button

Steam button

Water tank cover

Water tank

Steam control knob

Steam wand

Froth device

Steel mesh

Metal funnel

Funnel handle

Removable shelf

Drip tray

Water oat

Co󰀨ee spoon

Top

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sogo SS-5685 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info