Bedienungsanleitung Sogo SS-7765 (Seite 11 von 36) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

798359

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

español english français portuguese deutsch italiano

PART IDENTIFICATION

1. Lid

2. Spout

3. On / O󰀨 Switch

4.Handle

5. Base

6. Power Cord & Plug

7. Temperature indicator

8. Water level indicator

BEFORE USING

• Read the important safeguards and

Caution.

• Fill kettle up to the MAX WATER MARK and

let the water boil, pour the water, cool the

kettle and repeat for at least 3 times before

using.

HOW TO USE

1. Place the water kettle upright on a dry,

sturdy and at surface.

2. Remove the kettle from the base. Open the

lid by pressing the safety lock of lid.

Fill the kettle with fresh water through the

spout, make sure that the water level pass

the minimum level (0.5 Litre) and does not

exceed the maximum level (1 Litre). Before

closing the lid and placing it back to the

base, ensure that the kettle has not yet

been switched on (“I” position).

3. Dry the water on the bottom of the body if it

is wet, then place the kettle securely back

to the base. Insert the plug into a suitable

socket and switch the kettle to the “I”

position. The power indicator will be on.

4. After reaching the boiling point, the kettle

will be shut o󰀨 automatically by the safety

cut-out function.

5. To pour hot water, remove the container

from the base, ensure the lid remains

closed while pour out the water.

6. You may also shut the kettle o󰀨 at any

time by pressing the “on/o󰀨” switch to the

“0” position. After the boiling is nished,

allow the kettle to cool down for 15 minutes

before relling cold water.

WARNING:

DO NOT IMMERSE IN WATER!

To protect from Electrical hazard, do not

immerse this Kettle, its power base or its

cord set in any liquid.

CLEANING

Always disconnect the appliance from

the power outlet and cool it down

completely before cleaning.

Never immerse the kettle, power cord or

power base in water, or allow moisture

to contact with these parts.

Wipe the appearance of body with a

damp cloth or cleaner, never use a

poisonous cleaner.

CAUTION: Do not use chemical, steel,

wooden or abrasive cleaners to clean

the outside of the kettle to prevent

the loss of gloss.

Descaling the kettle

Please follow all instructions on descaling

products carefully.

1. Fill the kettle with water up to half of the

maximum level; add about two tablespoons

of vinegar into the water.

2. Switch the Kettle on and let the solution

reach boiling point.

3. Leave the solution in the kettle for a few

minutes

4. Empty the kettle, wash it with clean water.

5. After rinsing, ll the kettle with clean water

and bring to the point of boil for one more

time

6. If limescale is still present in kettle, repeat

this process

Thermometer

This Kettle has a special feature, of inbuilt

classic design thermometer, which helps

you to know exactly the water temperature

at the certain moment of time.

TECHNICAL SPECIFICATION:

Model No.: SS-7760, SS-7765

Voltage / Frequency: 220-240V~ 50-60Hz

Power Consumption: 1850 - 2200W

Capacity: 1,8L

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sogo SS-7765 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info