Bedienungsanleitung Solac BV5713 (Seite 11 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

719081

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

“PULSE / ICE CRUSH” FUNCTION

• The appliance works in highest speed to achie-

ve optimal performance.

• Press this button (I) to operate and release the

button (I) when you wish to stop operating.

• This function gives optimal result for ice-crus-

hing, up to desired snowy level.

• We recommend working by pressing the but-

ton in cycles of 3 seconds and repeating the

operation until you obtain the desired result.

• To crush ice cubes, put no more than 4 ice cu-

bes at one time. If you wish to add more ice,

pull out the measuring cup and insert the ice

cubes consecutively.

AD3503 MILL:

• Open the lid by turning it in clockwise direction.

• Put the ingredient into the grinder bowl (only

dry ingredients). Do not overll the bowl.

• Turn the mill unit clockwise until the lock clicks

into place. Connect the appliance to the mains.

• Choose desired speed to start grinding.

• To stop the appliance set the speed back to

“0”.

ONCE YOU HAVE FINISHED USING THE

MILL UNIT:

• Select the “0” position at the speed selector.

• Unplug the appliance to the mains.

• Lift the mill unit from the motor body.

• Turn the lid counter clockwise to open it.

• Clean the appliance.

CLEANING

• Disconnect the appliance from the mains and

allow it to cool before undertaking any cleaning

task.

• Clean the equipment with a damp cloth with a

few drops of washing-up liquid and then dry.

• Do not use solvents, or products with an acid

or base pH such as bleach, or abrasive pro-

ducts, for cleaning the appliance.

• Do not let water or any other liquid get into the

air vents to avoid damage to the inner parts of

the appliance.

• Never submerge the appliance in water or any

other liquid or place it under running water.

• During the cleaning process, take special care

with the blades, as they are very sharp.

• If the appliance is not in good condition of clean-

liness, its surface may degrade and inexorably

affect the duration of the appliance’s useful life

and could become unsafe to use.

• The following pieces may be washed in a di-

shwasher (using a soft cleaning program):

- Jug.

- Measuring cup

- Grinder Bowl.

• Do not place the lid into a dishwasher or boiling

water, the lid may deform.

• Then dry all parts before its assembly and sto-

rage.

SELF-CLEANING FUNCTION:

• Put water and a small amount of washing up

liquid in the jar.

• Select the function “turbo”.

REMOVABLE BLADES FOR EFFECTIVE

CLEANING:

• Loosen the blade xing ring by turning it in

clockwise direction. (Fig.2).

• Remove the blade set and sealing ring and

clean them. (Fig.3).

• After cleaning, replace the blade set and turn

blade xing ring in opposite direction.

ANOMALIES AND REPAIR

• Take the appliance to an authorised technical

support service if product is damaged or other

problems arise. Do not attempt to disassemble

or repair the appliance yourself as this may be

dangerous.

FOR EU PRODUCT VERSIONS AND/OR IN

CASE THAT IT IS REQUESTED IN YOUR

COUNTRY:

ECOLOGY AND RECYCLABILITY OF THE

PRODUCT

• The materials of which the packaging of this

appliance consists are included in a collection,

classication and recycling system. Should you

wish to dispose of them, use the appropriate

public recycling bins for each type of material.

• The product does not contain concentrations

of substances that could be considered harm-

ful to the environment.

- This symbol means that in case you wish

to dispose of the product once its working

life has ended; take it to an authorised

waste agent for the selective collection of

Waste from Electric and Electronic Equipment

(WEEE).

This appliance complies with Directive 2014/35/

EU on Low Voltage, Directive 2014/30/EU

on Electromagnetic Compatibility, Directive

2011/65/EU on the restrictions of the use of

certain hazardous substances in electrical and

electronic equipment and Directive 2009/125/

EC on the ecodesign requirements for ener-

gy-related products.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solac BV5713 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info