Bedienungsanleitung Solac BV5728 (Seite 8 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

799514

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

ONCE YOU HAVE FINISHED USING THE

APPLIANCE:

• Stop the appliance, selecting position 0 on the

selector control.

• Unplug the appliance from the mains.

• Lift the jar from the motor body.

• Clean the appliance.

“PULSE / ICE CRUSH” FUNCTION

• The appliance works in highest speed to achie-

ve optimal performance.

• This function gives optimal result for ice-crus-

hing, up to desired snowy level.

• Trun the speed selector knob to the left to ope-

rate the Pulse function (J).

• We recommend working by turning the knob in

cycles of 3 seconds and repeating the opera-

tion until you obtain the desired result.

• SAFETY THERMAL PROTECTOR:

• The appliance has a safety device, which pro-

tects the appliance from overheating.

• If the appliance turns itself off and does not

switch itself on again, disconnect it from the

mains supply, and wait for approximately 15

minutes before reconnecting. If the machine

does not start again seek authorised technical

assistance.

CLEANING

• Disconnect the appliance from the mains and

allow it to cool before undertaking any cleaning

task.

• Clean the equipment with a damp cloth with a

few drops of washing-up liquid and then dry.

• Do not use solvents, or products with an acid

or base pH such as bleach, or abrasive pro-

ducts, for cleaning the appliance.

• Do not let water or any other liquid get into the

air vents to avoid damage to the inner parts of

the appliance.

• Never submerge the appliance in water or any

other liquid or place it under running water.

• During the cleaning process, take special care

with the blades, as they are very sharp.

• If the appliance is not in good condition of clean-

liness, its surface may degrade and inexorably

affect the duration of the appliance’s useful life

and could become unsafe to use.

• The following pieces may be washed in a di-

shwasher (using a soft cleaning program):

• Jug

• Cup

• Lid.

• Then dry all parts before its assembly and sto-

rage.

SELF-CLEANING FUNCTION:

• Put water and a small amount of washing up

liquid in the jar.

• Select the function “turbo”.

REMOVABLE BLADES FOR EFFECTIVE

CLEANING:

• Disconnect the appliance from the mains and

allow it to cool before undertaking any cleaning

task.

• Loosen the jar base by turning it in counter-

clockwise direction. (Fig.3).

• Remove the blade set, sealing blade ring and

jar base and clean them. (Fig.4).

• After cleaning, replace the blade set and turn



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solac BV5728 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info