Bedienungsanleitung Solac CE4502 (Seite 9 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

799490

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

- Without tting the lter holder (J) (or with the

lter holder tted, but without coffee), place a

recipient under the steamer tube (I) outlet.

- Open the Steam knob (R) turning anticlock-

wise.

- Turn the selector knob (H) to the coffee/water

position (G1).

- Water will exit through the steam outlet. Wait

until approximately one cupful has exited.

- To nish serving, return the function selector

(H) to the center position (G0) and close steam

knob (R) turning clockwise.

- This will complete the priming operation.

FILLING WITH WATER:

- The tank must be lled with water before turn-

ing the appliance on.

- Remove the water tank.

- Fill the tank taking care to observe the MAX

level.

- Replace the tank in its housing, ensuring that it

is well tted and silicone tubes well introduced

on water tank.

FILLING COFFEE:

- Remove the lter holder (J).

- Position the selected ground coffee lter (L or

M) in the lter holder.

- Filter L (smaller one) can be used either for

ground coffee or paper pods.

- We recommend using natural toast coffee,

as using some roasted coffee may affect the

operation of the machine.

- Fill the chosen removable lter (1 or 2 cups)

with ground coffee (6-7 gr. per cup to be pre-

pared).

- Using measuring spoon (I) for 1 coffee, put 1

spoonful.

- For POD (single dose of paper), use the same

1-coffee lter, placing the well-placed mode in

the lter.

- For 2 coffees, use 2 cups lter and put in 2

spoonful.

- Next lightly press down the ground coffee with

the back of the spoon.

- Before tting the lter holder in the coffee-mak-

er assembly, turn the ladle-holder backwards.

- Fit the lter holder in the appliance once more.

- Position the lter holder in the coffee assem-

bly by inserting the assembly downwards and

turning it anticlockwise, from left to right, until

it locks.

USE TIPS:

- 1. The lter holder must be well placed. The

correct position is with the handle slightly past

the center (Fig1). See the position of the coffee

outlet at the bottom to get an idea of the correct

position: You will notice that the coffee output is

not perpendicular to the handle (to get an idea

of the position)

- 2. The lter holder must be closed with the

machine hot. If the machine is cold, it could

happen that the closure is not correct and there

is a small loss above the lter holder.

- 3. Use the appropriate amount of coffee (Fig 2),

to be able to properly close the lter holder

- 4. Use medium-ne coffee grinding size (Fig 3).

Excessively ne can make it difcult for coffee

to escape.

USE

- Before connecting the machine, check that the

steam control (R) is closed.

- Plug the appliance into the mains.

- Start the device by pressing the ON / OFF

button F, on the back of the machine.

- The D light will illuminate, indicating that the

machine is ON and heating.

- Wait until the E indicator will light, indicating

that the correct temperature has been reached.

- Fill the lter-holder with coffee.

- Place one or two preheated cups at the outlet

of the lter holder.

- Turn the selector knob (H) to the coffee/water

position (G1)

- The unit will start with the brewing.

- When you have obtained the desired amount

of espresso coffee (short or long), return the

function selector to the center position (G0).

- Finishing the supply wait a few seconds, re-

move the cups with the coffee.

- Remove the lter holder and empty it of the

grounds.

- Wash the lter holder with running water and

dry thoroughly.

- Check that the removable lter is perfectly

placed in the lter holder.

- Reattach the lter holder to the appliance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solac CE4502 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info