Bedienungsanleitung Solac CVG9613 (Seite 10 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

718544

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

you would hear a strange noise from the mi-

cro-pump. Switch off the steam selector to pre-

vent any damage to the system.

• Switch off the appliance and ll the water tank.

When switching it on again, this noise will dis-

appear.

USE:

• Unroll the cable completely before plugging it

in.

• Connect the appliance to the mains.

• Temperature and steam status are shown

on the screen (G), when both values remain

steady this indicates that the CVG is ready for

use, it will also beep when it reaches its setting.

• To select the various programs just turn the

digital screen to the left or right depending on

whether we wish to increase or decrease the

program number, the program will change with

a slight turn. Left decreases, right increases.

(Fig. 2) once turned, the dial will return to po-

sition.

• Given that the soleplate takes a long time to

cool, we recommend starting off with delicate

garments and then increasing the program

setting.

PROGRAM GARMENTS

Off

1 Antisheen

, special setting to avoid creating

sheen on dark garments

2 ECO

setting, the most efcient, optimised for

cost-effective ironing.

3 Delicates;

ironing directly on T-shirts with printed

decals and any delicate garment.

4 AUTO;

single setting suitable for all type of

ironing, except for very delicate garments.

Ironing

shirts

and cotton garments

6 Denim jeans

and heavy cotton

Linen;

fabrics that are difcult to iron.

8 TURBO;

Maximum temperature and steam ow

for

ULTRA FAST

ironing.

• -IMPORTANT: If the fabric is made up of var-

ious kinds of bres, select the temperature for

the bre that requires the lowest temperature.

(For example, select the temperature for pol-

yester for a fabric made out of 60% polyester

and 40% cotton (pos. 3)).

• - Temperature and steam status are shown on

the

PRESENCE SENSOR (D)

• The CVG is equipped with a presence sensor

(D) that instantly shuts off the steam outlet if

the handle is not being held. This leads to en-

ergy savings and increased autonomy of the

water tank (lower water consumption).

• Steam ow is automatically re-established by

holding the handle on the CVG

• Removing your hand from the handle does not

switch off the selected steam function, it only

interrupts the steam ow temporarily until it de-

tects that the handle is being gripped again.

The screen continues to display the icon for

the selected steam function.

DRY AND/OR STEAM IRONING

• The appliance has a steam control button

(without steam) or with steam if it is switched

on, a light indicates its status, on/enabled off/

disabled.

EXTRA STEAM:

• It is possible to iron with maximum steam ow

regardless of the setting. To do this, in the case

of steam ironing, just press the steam button

(c), the steam ow will increase to maximum,

to stop steam production just press the steam

button again. The screen displays the current

setting, with a steam bar which shows empty

when switched off, up through the various set-

tings for each program to maximum when the

super steam setting is activated.

STEAM BLAST:

• This function provides extra steam for remov-

ing creases.

• Press the steam blast button (B) only in pro-

grams 7 and 8, the screen will display an icon

to indicate when the EXTRA function (Fig

2) is ready. With the lower programs, sole-

plate temperature is not sufcient to produce

a steam blast, consequently the super steam

icon will not be displayed. Wait a few seconds

until the steam penetrates the bres of the

garment before pushing the button again. For

optimum steam quality, do not apply more than

three successive blasts.

• During initial use it is necessary to press re-

peatedly in order to prime the super steam

water circuit.

VERTICAL IRONING:

• It is possible to iron hanging curtains, items of

clothing on their own hanger, etc. To do so, fol-

low these instructions:

• Iron from top to bottom while pressing the

steam control (B), follow the instructions given

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solac CVG9613 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info