Bedienungsanleitung Solac HU1059 (Seite 9 von 48) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

718615

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

to turn off the humidier and rell the tank with

water before turning the device back on.

• 9 When you want to stop the appliance from

emitting steam, press 2 or 3 seconds the on/

off selector (1) till the pilot light goes off.

• 10 Unplug the humidier from the mains soc-

ket and empty the water tank and interior tank

CLEANING

• Disconnect the appliance from the mains and

allow it to cool before undertaking any cleaning

task.

• Clean the electrical equipment and the mains

connection with a damp cloth and dry. DO

NOT IMMERSE IN WATER OR ANY OTHER

LIQUID.

• Clean the equipment with a damp cloth with a

few drops of washing-up liquid and then dry.

• Do not use solvents, or products with an acid

or base pH such as bleach, or abrasive pro-

ducts, for cleaning the appliance.

• Never submerge the appliance in water or any

other liquid or place it under running water.

• Never submerge the connector in water or any

other liquid or place it under running water.

• If the appliance is not in good condition of clean-

liness, its surface may degrade and inexorably

affect the duration of the appliance’s useful life

and could become unsafe to use.

• Then dry all parts before its assembly and sto-

rage.

• There may be some scale deposits in the trans-

ducer, particularly in areas with hard water.

- Overcome this drawback by cleaning the

transducer

- Rub down with a dry cloth and remove

remains of moisture.

- Do not place the transducer directly under

the tap.

- Do not rub the transducer with hard or

metal objects.

- Do not clean with chemical products

HOW TO DEAL WITH LIME SCALE INCRUS-

TATIONS:

• For the appliance to work correctly it should be

kept free of limescale or magnesium incrusta-

tions caused by the use of hard water.

• To prevent this kind of problem, we recom-

mend the use of water with low lime or magne-

sium mineralisation.

• However, if it is not possible to use the kind of

water recommended above, you should perio-

dically remove the limescale from the applian-

ce:

- Every 6 weeks if the water is “very hard”.

- Every 12 weeks if the water is “hard”.

• A specic anti-lime scale product should be

used on this kind of product.

• Fill the tank with water plus the anti-lime pro-

duct, leave about 30 minutes, drain and clean

with water.

• Homemade solutions are not recommended in

the decaling of this appliance, such as the use

of vinegar.

RECOMMENDATIONS

• Never leave water in the base or in the tank.

• Note: Water accumulated over long periods

may create bacteria and mildew (fungus).

• Dry all the parts inside the appliance carefully,

paying particular attention to the transducer.

• Store the appliance in a cool, dry place.

ANOMALIES AND REPAIR

• Take the appliance to an authorised technical

support service if product is damaged or other

problems arise. Do not attempt to disassemble

or repair the appliance yourself as this may be

dangerous.

FOR EU PRODUCT VERSIONS AND/OR IN

CASE THAT IT IS REQUESTED IN YOUR

COUNTRY:

ECOLOGY AND RECYCLABILITY OF THE

PRODUCT

• The materials of which the packaging of this

appliance consists are included in a collection,

classication and recycling system. Should you

wish to dispose of them, use the appropriate

public recycling bins for each type of material.

• The product does not contain concentrations

of substances that could be considered harm-

ful to the environment.

• This symbol means that in case you wish to

dispose of the product once its wor-

king life has ended; take it to an au-

thorised waste agent for the selective

collection of Waste from Electric and

Electronic Equipment (WEEE).

This appliance complies with Directive 2014/35/

EU on Low Voltage, Directive 2014/30/EU

on Electromagnetic Compatibility, Directive

2011/65/EU on the restrictions of the use of

certain hazardous substances in electrical and

electronic equipment and Directive 2009/125/

EC on the ecodesign requirements for ener-

gy-related products.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solac HU1059 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info