Bedienungsanleitung Solac ME7713 (Seite 13 von 77) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

719068

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

(DRY BRUSH), which will leave the area free of

dead cells and make the skin softer. Avoid

damaging the skin through excessive

exfoliation (once per week is sufficient). Gently

massage the entire area for 5 minutes. This

step helps to stimulate your blood circulation

and metabolism.

 The skin should always be brushed toward the

heart, starting with the feet and moving up to

the hips in the case of legs, and from wrist to

shoulder for arms. Persist on rougher areas

and be careful with sensitive areas. Adjust the

intensity of exfoliation based on the condition of

the skin, the body area and particular

sensitivity.

2. WARM UP

 For effective treatment, we recommend first

pre-warming and draining the area to be

treated, especially if you have hard, painful

cellulite. The aim is to gradually knead the area

so that warms through, making the fat easier to

separate from the skin; this will also shift

retained toxins, activating local venous and

lymphatic circulation. To perform lymphatic

drainage, use very gentle shallow movements.

 The main goal of lymphatic drainage is to

stimulate the lymphatic system to increase

the removal of liquids that sometimes

accumulate between the cells.

2 TREATMENT:

 ANTI-CELLULITE or BODY-MODELLING

head, in the case of painful cellulite

 Once the warm up actions have been

completed, we can begin performing the

massage treatment. Unlike draining, the

reduction massage works with strong, fast,

repetitive movements on the skin, using the

force of the kneading and sliding movements.

 In general, the anti-cellulite reduction massage

is recommended for modelling the curves of the

body, working on the "saddlebags", abdomen,

buttocks, etc.

3 COMPLETION

 Apply a moisturizing or treatment cream using

the BODY-CONTOUR head.

ONCE YOU HAVE FINISHED USING THE

APPLIANCE:

 Stop the appliance by releasing the pressure

on the on/off button.

 Unplug the appliance to the mains.

 Clean the appliance

CLEANING

 Disconnect the appliance from the mains and

let it cool before undertaking any cleaning task.

 Clean the equipment using a damp cloth with a

few drops of washing-up liquid and then dry.

 Do not use solvents, or products with an acid or

base pH such as bleach, or abrasive products,

for cleaning the appliance.

 Do not submerge the appliance in water or any

other liquid, or place it under a running tap.

ANOMALIES AND REPAIR

 Take the appliance to an authorised technical

support service if problems arise. Do not try to

dismantle or repair without assistance, as this

may be dangerous.

For EU product versions and/or in the case

that it is requested in your country:

ECOLOGY AND RECYCLABILITY OF

THE PRODUCT

 The materials of which the packaging of this

appliance consists are included in a collection,

classification and recycling system. Should you

wish to dispose of them, use the appropriate

public containers for each type of material.

 The product does not contain concentrations of

substances that could be considered harmful to

the environment

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solac ME7713 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info