Bedienungsanleitung Solac PV1610 (Seite 12 von 78) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

507551

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

USE 13

) We recommend that clothes are sorted according to the temperature required for

ironing, starting with the garments that require the lowest temperature (min).

, N.B.: Ironing delicate garments with a higher temperature than necessary will damage

the fabric and cause the burnt residue to stick to the sole plate.

, If you have any doubts about the temperature to use on a particular garment, test a part

of the garment that is not visible, starting first with the lowest temperatures.

USE

) This appliance has been designed exclusively for ironing clothes. Do not use it for other

use.

) Completely remove all elements used for transport and packaging.

n If the unit is hot, handle with caution and avoid touching the metal sole plate.

n Never leave the iron in the horizontal position when the soleplate is hot. It must rest on

its rear part.

n Be careful with steam, do not direct steam towards people, animals or delicate objects.

n Always iron on a stable, firm and smooth surface.

) For very delicate garments, place a cloth between the iron and the delicate garment, to

avoid marks on the soleplate.

1 Extend the cord completely and plug the socket into the power supply. The warming

light will (9) come on. Set the iron upright.

2 Select the desired working temperature according to the garment being ironed (see

"TEMPERATURE SELECTION (fig. 4)”).

3 Select iron with steam ; or without steam , as convenient (see “STEAM

SELECTION").

4 Take the iron and slide the sole plate over the fabric to be ironed.

5 When you finish using the iron, move the steam (8) to the closed position and the

temperature selector (7) in the min position.

6 Disconnect the connection cord from the power supply

7 Empty the water tank (see "EMPTYING THE WATER TANK”).

Wait until the iron is completely cool and store upright in a safe place.

BEFORE USING FOR THE FIRST TIME

) Before using for the first time, use the appliance to iron a cloth or old garment, to clean

the system.

1 Set the temperature selector (7) to the max position and wait a few minutes until the

iron reaches the appropriate temperature (heating light will switch off).

2 Move the steam selector (8) to its fully opened position .

The steam will start to come out through the soleplate holes.

3 Take the iron by the handle and slide the sole over an old cloth.

4 When the water in the tank finishes, the steam will stop. The iron is then ready for use.

) Do not worry if the iron gives off a little smoke when using for the first time. This will

quickly disappear.

SYNTHETIC FIBRES, minimum temperature (min/•)

SILK, WOOL, medium temperature (••)

COTTON, high temperature (•••)

LINEN, MAX. temperature

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solac PV1610 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info